view src/g23m-aci/gdd_dio/gdd_dio_data.h @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+------------------------------------------------------------------------------
|  File:       gdd_dio_data.h
+------------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Internal data structures for entity gdd_dio (DIO BAT Adapter)
+----------------------------------------------------------------------------- 
*/ 

#ifndef GDD_DIO_DATA_H
#define GDD_DIO_DATA_H

/*==== INCLUDES =============================================================*/

/* DIO stuff */
#include "dio.h"  /* for T_DIO_CAP_PKT */

/* We must define P_DIO_H, in order to avoid inclusion of p_dio.h.
   This is necessary due to the special fact, that "dio.h", which is included
   in the header "dio_io/dio_drv.h", mirrors the header "p_dio.h". */
#define P_DIO_H

#include "gdd.h"

#include "gdd_dio_queue.h"  /* for T_GDD_BUF_QUEUE */


/*==== DEFINITIONS ==========================================================*/

#define GDD_CON_HANDLE_USER_MASK 0xFF000000


/*==== CONSTS ===============================================================*/

/*==== TYPES =================================================================*/

/**
 * States of kernel service
 */
typedef enum 
{
	GDD_DIO_KER_DEAD = 0,
  GDD_DIO_KER_INIT,
  GDD_DIO_KER_READY
} T_GDD_DIO_KER_STATE;


/**
 * Kernel service data
 */
typedef struct
{
  T_GDD_DIO_KER_STATE         state;
} T_GDD_DIO_KER_DATA;


/**
 * States of a single connection
 */
typedef enum
{
  GDD_DIO_CON_DEAD = 1,
  GDD_DIO_CON_CONNECT,
  GDD_DIO_CON_READY,
  GDD_DIO_CON_SENDING,
  GDD_DIO_CON_CLOSE
} T_GDD_DIO_CON_STATE;

/**
 * Connection data
 */
typedef struct 
{
  T_GDD_BUF_QUEUE			   rx_queue;       /* RX buffer queue */
  T_GDD_BUF_QUEUE				 tx_queue;       /* TX buffer queue */
  UBYTE                  con_state;      /* Connection state */
  UBYTE                  wait_send_buf;  /* Flag indicating that we wait for
                                            a send buffer */
  U32                    dio_device;     /* Dio device type */
  T_GDD_RECEIVE_DATA_CB  rcv_cb;         /* Receive callback of the client */
  T_GDD_SIGNAL_CB        sig_cb;         /* Signale callback of the client */
  T_DIO_CAP_PKT          dio_cap;        /* DIO capabilities */
} T_GDD_DIO_CON_DATA;

/**
 * DIO driver number
 */
typedef U32 T_GDD_DIO_DRV_NUM;


/*==== EXPORTS ===============================================================*/

int inst_num_from_dev_id(U32 device);


#endif /* !GDD_DIO_DATA_H */