view src/g23m-fad/fad/fad_kerp.c @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :  GSM-F&D (8411)
|  Modul   :  FAD_KERP
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :  This Modul defines the functions for processing
|             of incomming primitives for the component
|             Fax Adaptation 3.45 of the mobile station
+-----------------------------------------------------------------------------
*/

#ifndef FAD_KERP_C
#define FAD_KERP_C
#endif

#define ENTITY_FAD

/*==== INCLUDES ===================================================*/

#include <string.h>
#include "typedefs.h"
#include "pconst.cdg"
#include "vsi.h"
#include "macdef.h"
#include "pconst.cdg"
#include "custom.h"
#include "gsm.h"
#include "cnf_fad.h"
#include "mon_fad.h"
#include "prim.h"
#include "pei.h"
#include "tok.h"
#include "ccdapi.h"
#include "fad.h"

#ifdef _TARGET_
  #include "ra_l1int.h"
#endif

/*==== CONST =======================================================*/

/*==== TYPES =======================================================*/

/*==== VAR EXPORT ==================================================*/

/*==== VAR LOCAL ===================================================*/

/*==== FUNCTIONS ===================================================*/

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : FAD_KERP             |
| STATE   : code                      ROUTINE : ker_fad_activate_req |
+--------------------------------------------------------------------+

  PURPOSE : Process primitive FAD_ACTIVATE_REQ received from T30.

*/

GLOBAL void ker_fad_activate_req (T_FAD_ACTIVATE_REQ *fad_activate_req)
{
  TRACE_EVENT ("ker_fad_activate_req()");
  PACCESS (fad_activate_req);

  /*******************************/
  /*
   *  Initialize Shared Fax/Data memory
   */

  fad_data = &fad_data_base[0];
  ker_init ();
  snd_init ();
  rcv_init ();

  /*
   *  reset RBM
   */
  rbm_reset ();

  fad_data_magic_num = FAD_DATA_MAGIC_NUM;  /* memory is initialized */

  /*******************************/

  if (GET_STATE (KER) EQ KER_NULL)
  {
    sig_ker_snd_activate_req (fad_activate_req);
    sbm_init (FRAME_SIZE);
    rbm_init (fad_activate_req->frames_per_prim);
    sig_ker_snd_sync_req (FALSE);
    {
    PALLOC (fad_activate_cnf, FAD_ACTIVATE_CNF);
    /*
     * calculate the RX and TX buffersizes and notify it
     * to T30
     */
    fad_activate_cnf->buf_size_rx
      = fad_activate_req->frames_per_prim * FRAME_SIZE * RBM_PQ_MAX_PRIM;
    fad_activate_cnf->buf_size_tx
      = fad_activate_req->frames_per_prim * FRAME_SIZE * SBM_MAX_PRIMS;
    PSENDX (T30, fad_activate_cnf);
    }
    SET_STATE (KER, IDLE);

#ifdef _TARGET_
    {
    T_RA_DATATRANS_REQ RA_datatrans_req;
    l1i_ra_datatrans_req(&RA_datatrans_req);
    }
#endif

  }

  PFREE (fad_activate_req);
}


/*
+----------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : FAD_KERP               |
| STATE   : code                      ROUTINE : ker_fad_deactivate_req |
+----------------------------------------------------------------------+

  PURPOSE : Process primitive FAD_DEACTIVATE_REQ received from T30.

*/

GLOBAL void ker_fad_deactivate_req (T_FAD_DEACTIVATE_REQ *fad_deactivate_req)
{
  TRACE_EVENT ("ker_fad_deactivate_req()");

  PACCESS (fad_deactivate_req);

  sig_ker_snd_sync_req (FALSE);
  rbm_deinit(TRUE);
  SET_STATE (KER, KER_NULL);

  {
  PALLOC (fad_deactivate_cnf, FAD_DEACTIVATE_CNF);
  PSENDX (T30, fad_deactivate_cnf);
  }

  PFREE (fad_deactivate_req);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : FAD_KERP             |
| STATE   : code                      ROUTINE : ker_fad_modify_req   |
+--------------------------------------------------------------------+

  PURPOSE : Process primitive FAD_MODIFY_REQ received from T30.

*/

GLOBAL void ker_fad_modify_req (T_FAD_MODIFY_REQ *fad_modify_req)
{
  TRACE_EVENT ("ker_fad_modify_req()");
  PACCESS (fad_modify_req);

  if (GET_STATE (KER) NEQ KER_NULL)
  {
    fad_data->snd.trans_rate = fad_modify_req->trans_rate;
    fad_data->rcv.FlagFound = 0;
    TRACE_EVENT_P1("MODIFY %d bps", fad_data->snd.trans_rate);
  }

  PFREE (fad_modify_req);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : FAD_KERP             |
| STATE   : code                      ROUTINE : ker_fad_data_req     |
+--------------------------------------------------------------------+

  PURPOSE : Process primitive FAD_DATA_REQ received from T30.

*/

GLOBAL void ker_fad_data_req (T_FAD_DATA_REQ *fad_data_req)
{
  T_SBM *sbm = &fad_data->sbm;
  USHORT err_cause = 0;

#ifdef _SIMULATION_
  TRACE_FUNCTION ("ker_fad_data_req()");
#endif

  PACCESS (fad_data_req);

  switch (GET_STATE (KER))
  {
  case KER_NULL:
    err_cause = ERR_LOCAL_DATA_NULL;
    break;

  case IDLE:
    if (fad_data_req->trans_rate EQ R_BCS)
    {
      SET_STATE (KER, BCS_REC);
      sig_ker_snd_preamble_req (fad_data_req);
    }
    else
    {
      if (fad_data_req->trans_rate EQ R_7200)
      {
        sbm->syncCycle = SYNC_CYCLE_7200;
        sbm->framesUntilSync = (SYNC_CYCLE_7200-1);
      }
      else if (fad_data_req->trans_rate EQ R_12000)
      {
        sbm->syncCycle = SYNC_CYCLE_12000;
        sbm->framesUntilSync = (SYNC_CYCLE_12000-1);
      }

      SET_STATE (KER, MSG_REC);
      sig_ker_snd_train_req (fad_data_req, TRUE);
    }
    break;

  case BCS_REC:
    if (fad_data_req->trans_rate EQ R_BCS)
      sig_ker_snd_bcs_req (fad_data_req);
    else
      err_cause = ERR_LOCAL_MSG_RATE;
    break;

  case MSG_REC_TCF:
    err_cause = ERR_LOCAL_DATA_TCF_SND;
    break;

  case MSG_REC:
    if (fad_data_req->trans_rate NEQ R_BCS)
      sig_ker_snd_msg_req (fad_data_req);
    else
      err_cause = ERR_LOCAL_BCS_RATE;
    break;

  case BCS_TRA:
    if (fad_data_req->trans_rate EQ R_BCS)
      fad_data->snd.fad_data_req = fad_data_req; /* store data, send later */
    break;

  case MSG_TRA_TCF:
     err_cause = ERR_LOCAL_DATA_TCF_RCV;
   break;

  case MSG_TRA:
    err_cause = ERR_LOCAL_DATA_MSG;
    break;

  default:
    err_cause = ERR_LOCAL_DATA_UNDEF;
    break;
  }

  if (err_cause)
  {
    ker_SetError (err_cause);
    sig_ker_snd_sync_req (FALSE);
    SET_STATE (KER, IDLE);
    PFREE (fad_data_req);
  }

}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : FAD_KERP             |
| STATE   : code                      ROUTINE : ker_fad_snd_tcf_req  |
+--------------------------------------------------------------------+

  PURPOSE : Process primitive FAD_SND_TCF_REQ received from T30.

*/

GLOBAL void ker_fad_snd_tcf_req (T_FAD_SND_TCF_REQ *fad_snd_tcf_req)
{
  T_SBM *sbm = &fad_data->sbm;

  TRACE_FUNCTION ("ker_fad_snd_tcf_req()");
  PACCESS        (fad_snd_tcf_req);

  if (GET_STATE (KER) EQ IDLE)
  {
    SET_STATE (KER, MSG_REC_TCF);

    if (fad_snd_tcf_req->trans_rate EQ R_7200)
    {
      sbm->syncCycle = SYNC_CYCLE_7200;
      sbm->framesUntilSync = (SYNC_CYCLE_7200-1);
    }
    else if (fad_snd_tcf_req->trans_rate EQ R_12000)
    {
      sbm->syncCycle = SYNC_CYCLE_12000;
      sbm->framesUntilSync = (SYNC_CYCLE_12000-1);
    }

    sig_ker_snd_tcf_req ();
  }

  PFREE (fad_snd_tcf_req);
}


/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : FAD_KERP             |
| STATE   : code                      ROUTINE : ker_fad_rcv_tcf_req  |
+--------------------------------------------------------------------+

  PURPOSE : Process primitive FAD_RCV_TCF_REQ received from T30.

*/

GLOBAL void ker_fad_rcv_tcf_req (T_FAD_RCV_TCF_REQ *fad_rcv_tcf_req)
{
  T_SBM *sbm = &fad_data->sbm;

  TRACE_FUNCTION ("ker_fad_rcv_tcf_req()");

  PACCESS        (fad_rcv_tcf_req);

  if (GET_STATE (KER) EQ IDLE)
  {
    if (fad_rcv_tcf_req->trans_rate EQ R_7200)
    {
      sbm->syncCycle = SYNC_CYCLE_7200;
      sbm->framesUntilSync = (SYNC_CYCLE_7200-1);
    }
    else if (fad_rcv_tcf_req->trans_rate EQ R_12000)
    {
      sbm->syncCycle = SYNC_CYCLE_12000;
      sbm->framesUntilSync = (SYNC_CYCLE_12000-1);
    }

    SET_STATE (KER, MSG_TRA_TCF);
    sig_ker_rcv_await_tcf_req ();
  }

  PFREE (fad_rcv_tcf_req);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : FAD_KERP             |
| STATE   : code                      ROUTINE : ker_fad_ready_req    |
+--------------------------------------------------------------------+

  PURPOSE : Process primitive FAD_READY_REQ received from T30.

*/

GLOBAL void ker_fad_ready_req (T_FAD_READY_REQ *fad_ready_req)
{

  TRACE_FUNCTION ("ker_fad_ready_req()");
  PACCESS        (fad_ready_req);

  /* PZ 25.5.99
  if (GET_STATE (KER) EQ MSG_TRA)
    sig_ker_rcv_ready_req ();
  */
  sig_ker_rcv_ready_req ();

  PFREE (fad_ready_req);
}


/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : FAD_KERP             |
| STATE   : code                      ROUTINE : ker_fad_ignore_req   |
+--------------------------------------------------------------------+

  PURPOSE : Process primitive FAD_IGNORE_REQ received from T30.

*/

GLOBAL void ker_fad_ignore_req (T_FAD_IGNORE_REQ *fad_ignore_req)
{
  TRACE_FUNCTION ("ker_fad_ignore_req()");
  PACCESS        (fad_ignore_req);

  if (GET_STATE (KER) EQ MSG_TRA)
    fad_data->ker.forward_data = FALSE;

  PFREE (fad_ignore_req);
}