view src/g23m-fad/fad/fad_pei.c @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :
|  Modul   :
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :  This module implements the process body interface
|             for the component Fax Adaptation 3.45 of the mobile station.
+-----------------------------------------------------------------------------
*/

#ifndef FAD_PEI_C
#define FAD_PEI_C
#endif

#define ENTITY_FAD

/*==== INCLUDES ===================================================*/

#include <string.h>
#include <stdlib.h>
#include <stddef.h>
#include "typedefs.h"
#include "pcm.h"
#include "vsi.h"
#include "custom.h"
#include "gsm.h"
#include "message.h"
#include "ccdapi.h"
#include "prim.h"
#include "cus_fad.h"
#include "cnf_fad.h"
#include "mon_fad.h"
#include "pei.h"
#include "tok.h"
#include "fad.h"

/*==== CONST ======================================================*/

/*==== VAR EXPORT =================================================*/

/*==== VAR LOCAL ==================================================*/

LOCAL BOOL              first_access = TRUE;
LOCAL T_MONITOR         fad_mon;

/*==== FUNCTIONS ==================================================*/

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)             MODULE  : FAD_PEI             |
| STATE   : code                       ROUTINE : pei_not_supported   |
+--------------------------------------------------------------------+

  PURPOSE : An unsupported primitive is received.

*/

LOCAL void pei_not_supported (void *data)
{
  TRACE_FUNCTION ("pei_not_supported()");
  PFREE (data);
}

/*
 *
 * Use MAK_FUNC_0 for primitives which contains no SDU.
 *
 * Use MAK_FUNC_S for primitives which contains a SDU.
 */

/*
 * jumptable for the entity service access point. Contains
 * the processing-function addresses and opcodes of
 * request and response primitives.
 *
 */

LOCAL const T_FUNC fad_table[] = {
  MAK_FUNC_0( ker_fad_activate_req  ,           FAD_ACTIVATE_REQ   ),
  MAK_FUNC_0( ker_fad_deactivate_req,           FAD_DEACTIVATE_REQ ),
  MAK_FUNC_0( ker_fad_modify_req,               FAD_MODIFY_REQ     ),
  MAK_FUNC_S( ker_fad_data_req,                 FAD_DATA_REQ       ),
  MAK_FUNC_0( ker_fad_snd_tcf_req,              FAD_SND_TCF_REQ    ),
  MAK_FUNC_0( ker_fad_rcv_tcf_req,              FAD_RCV_TCF_REQ    ),
  MAK_FUNC_0( ker_fad_ready_req,                FAD_READY_REQ      ),
  MAK_FUNC_0( ker_fad_ignore_req ,              FAD_IGNORE_REQ     )
};

/*
 * jumptable for the service access point which are used by
 * the entity. Contains the processing-function addresses and
 * opcodes of indication and confirm primitives.
 *
 */
LOCAL const T_FUNC ra_table[] = {
  MAK_FUNC_0( snd_ra_ready_ind,              RA_READY_IND     ),
  MAK_FUNC_S( rcv_ra_data_ind,               RA_DATA_IND      )
};

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)               MODULE  : FAD_PEI           |
| STATE   : code                         ROUTINE : pei_primitive     |
+--------------------------------------------------------------------+

  PURPOSE : Process protocol specific primitive.

*/
LOCAL SHORT pei_primitive (void * ptr)
{
  T_PRIM *prim = ptr;
  /*
   * @ADAPT@
   *                    |
   *                   T30                 UPPER LAYER
   *                    |
   *                    v
   *      +-----------(fad)----------+
   *      |                          |
   *      |            FAD           |
   *      |                          |
   *      +-------------^------------+
   *                    |
   *                   RA                  LOWER LAYER
   *                    |
   *
   */

  TRACE_FUNCTION ("pei_primitive()");

  if (prim NEQ NULL)
  {
    ULONG            opc = prim->custom.opc;
    USHORT           n;
    const T_FUNC    *table;

    VSI_PPM_REC ((T_PRIM_HEADER *)prim, __FILE__, __LINE__);
    PTRACE_IN (opc);
    fad_data = GET_INSTANCE (prim);

    switch (SAP_NR(opc))
    {
      case SAP_NR(FAD_UL): table =  fad_table; n = TAB_SIZE (fad_table); break;
      case SAP_NR(RA_DL ): table =  ra_table;  n = TAB_SIZE (ra_table);  break;
      default    : table =  NULL;      n = 0;                    break;
    }

    if (table NEQ NULL )
    {
      if (PRIM_NR(opc) < n)
      {
        table += PRIM_NR(opc);
#ifdef PALLOC_TRANSITION
        P_SDU(prim) = table->soff ? (T_sdu*) (((char*)&prim->data) + table->soff) : 0;
#ifndef NO_COPY_ROUTING
        P_LEN(prim) = table->size + sizeof (T_PRIM_HEADER);
#endif /* NO_COPY_ROUTING */
#endif /* PALLOC_TRANSITION */
        JUMP (table->func) (P2D(prim));
      }
      else
      {
        pei_not_supported (P2D(prim));
      }
      return PEI_OK;
    }
    /*
     * Primitive is no GSM Primitive
     * then forward to the environment
     */

#ifdef GSM_ONLY
    PFREE (P2D(prim))
    return PEI_ERROR;
#else
    if (opc & SYS_MASK)
      vsi_c_primitive (VSI_CALLER prim);
    else
    {
      PFREE (P2D(prim));
      return PEI_ERROR;
    }
#endif
  }
  return PEI_OK;
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)             MODULE  : FAD_PEI             |
| STATE   : code                       ROUTINE : pei_init            |
+--------------------------------------------------------------------+

  PURPOSE : Initialize Protocol Stack Entity

*/
LOCAL SHORT pei_init (T_HANDLE handle)
{
  TRACE_FUNCTION ("pei_init()");

  fad_handle = handle;

  if (hCommT30 < VSI_OK)
  {
    if ((hCommT30 = vsi_c_open (VSI_CALLER T30_NAME)) < VSI_OK)
      return PEI_ERROR;
  }

#ifdef _SIMULATION_
  if (hCommRA < VSI_OK)
  {
    if ((hCommRA = vsi_c_open (VSI_CALLER RA_NAME)) < VSI_OK)
      return PEI_ERROR;
  }
#endif

  fad_data = &fad_data_base[0];
  fad_data_magic_num = 0;       /* memory is not yet initialized */
  return PEI_OK;
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)             MODULE  : FAD_PEI             |
| STATE   : code                       ROUTINE : pei_timeout         |
+--------------------------------------------------------------------+

  PURPOSE : Process timeout

*/
LOCAL SHORT pei_timeout (USHORT index)
{

  fad_exec_timeout (index);

  return PEI_OK;
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)             MODULE  : FAD_PEI             |
| STATE   : code                       ROUTINE : pei_signal          |
+--------------------------------------------------------------------+

  PURPOSE : Functional interface to signal a primitive.

*/

LOCAL SHORT pei_signal (ULONG opc, void *primData)
{
#ifdef OPTION_SIGNAL

  if (fad_data_magic_num NEQ FAD_DATA_MAGIC_NUM)
    /* memory is not initialized */
  {
    /* ignore received signals */
    return PEI_OK;
  }

  fad_data = GET_INSTANCE (primData);

  switch (opc)
  {
    case RA_DATA_IND:
      rcv_ra_data_ind
      (
        (T_RA_DATA_IND *)primData
      );
      break;
    case RA_READY_IND:
      snd_ra_ready_ind
      (
        (T_RA_READY_IND *)primData
      );
      break;
  }
#endif
  return PEI_OK;
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)             MODULE  : FAD_PEI             |
| STATE   : code                       ROUTINE : pei_exit            |
+--------------------------------------------------------------------+

  PURPOSE : Close Resources and terminate

*/

LOCAL SHORT pei_exit (void)
{
  TRACE_FUNCTION ("pei_exit()");

  /*
   * clean up communication
   */
  vsi_c_close (VSI_CALLER hCommT30);
  hCommT30= VSI_ERROR;

  return PEI_OK;
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)             MODULE  : FAD_PEI             |
| STATE   : code                       ROUTINE : pei_config          |
+--------------------------------------------------------------------+

  PURPOSE : Dynamic Configuration

*/

#if !defined (NCONFIG)

  LOCAL KW_DATA kwtab[] = {
    "",                     0
  };

#endif

LOCAL SHORT pei_config (T_PEI_CONFIG inString)
{
#if !defined (NCONFIG)
  char    *s = inString;
  char    *keyw;
  char    *val [10];

  TRACE_FUNCTION ("pei_config()");
  TRACE_EVENT (s);

  tok_init (s);

  /*
   * Parse next keyword and number of variables
   */

  while (tok_next(&keyw,val) NEQ TOK_EOCS)
  {
    switch (tok_key((KW_DATA *)kwtab, keyw))
    {
      case TOK_NOT_FOUND:
        TRACE_ERROR ("[PEI_CONFIG]: Illegal Keyword");
        break;

      default:
        break;
    }

  }
#endif
  return PEI_OK;
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)             MODULE  : FAD_PEI             |
| STATE   : code                       ROUTINE : pei_monitor         |
+--------------------------------------------------------------------+

  PURPOSE : Monitoring of physical Parameters

*/
LOCAL SHORT pei_monitor (void **monitor)
{
  TRACE_FUNCTION ("pei_monitor()");

  fad_mon.version = VERSION_FAD;
  *monitor = &fad_mon;
  return PEI_OK;
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)             MODULE  : FAD_PEI             |
| STATE   : code                       ROUTINE : pei_create          |
+--------------------------------------------------------------------+

  PURPOSE : Create the Protocol Stack Entity

*/

/*lint -e714 : Symbol not referenced */
/*lint -e765 : external could be made static */
GLOBAL SHORT fad_pei_create (T_PEI_INFO **info)
{
  static const T_PEI_INFO pei_info =
  {
    "FAD",
    {
      pei_init,
      pei_exit,
      pei_primitive,
      pei_timeout,
      pei_signal,
      NULL,                  /* no run function     */
      pei_config,
      pei_monitor
    },
    1024, /* Stack Size      */
    10,   /* Queue Entries   */
    215,  /* Priority        */
    0,    /* number of timer */
    0x03|PRIM_NO_SUSPEND  /* flags           */
  };

  TRACE_FUNCTION ("pei_create()");

  /*
   *  Close Resources if open
   */

  if (first_access)
    first_access = FALSE;
  else
    pei_exit ();

  /*
   *  Export startup configuration data
   */

  *info = (T_PEI_INFO *)&pei_info;

  return PEI_OK;
}