view src/g23m-fad/l2r/tra_mgtp.c @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :  CSD (8411)
|  Modul   :  tra_mgtp.c
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :  This Modul defines the functions for processing
|             of incomming primitives for the component TRA
+-----------------------------------------------------------------------------
*/

#ifndef TRA_MGTP_C
#define TRA_MGTP_C
#endif

#define ENTITY_L2R

/*==== INCLUDES ===================================================*/

#include <string.h>

#include "typedefs.h"
#include "pconst.cdg"
#include "vsi.h"
#include "macdef.h"
#include "custom.h"
#include "gsm.h"
#include "prim.h"
#include "pei.h"
#include "tok.h"
#include "dti.h"

#include "cl_ribu.h"
#include "tra_pei.h"
#include "tra.h"

#include "ra_l1int.h"

/*==== CONST =======================================================*/
/*==== TYPES =======================================================*/
/*==== VAR EXPORT ==================================================*/
/*==== VAR LOCAL ===================================================*/
/*==== FUNCTIONS ===================================================*/

/*
+------------------------------------------------------------------------------
|  Function    : mgt_tra_activate_req
+------------------------------------------------------------------------------
|  Description : Process primitive TRA_ACTIVATE_REQ  received from ACI
|
|  Parameters  : tra_activate_req
|
|
|  Return      : -
+------------------------------------------------------------------------------
*/

GLOBAL void mgt_tra_activate_req(T_TRA_ACTIVATE_REQ *tra_activate_req)
{
  TRACE_EVENT ("mgt_tra_activate_req()");
  PACCESS (tra_activate_req);

  /***************************************
   *
   *  Initialize Shared Fax/Data memory  *
   *
   ***************************************/

  tra_data = tra_data_first_elem;
  memset (tra_data, 0, sizeof (T_TRA_DATA));
  tra_data->up.fd.buf = &tra_data->up.to_ra[0];
  l2r_data_mode = TRANSP;                     /* global flag for mode */
  rbm_init(&tra_data->dn);
  INIT_STATE (MGT, MGT_ACTIVE);
  INIT_STATE (DTI, DTI_CLOSED);
  INIT_STATE (DN, DN_INACTIVE);
  INIT_STATE (UP, UP_INACTIVE);

  {
    PPASS (tra_activate_req, tra_activate_cnf, TRA_ACTIVATE_CNF);
    tra_activate_cnf->ack_flg = TRA_ACK;
    PSENDX (CTRL, tra_activate_cnf);
  }

}

/*
+------------------------------------------------------------------------------
|  Function    : mgt_tra_deactivate_req
+------------------------------------------------------------------------------
|  Description : Process primitive TRA_DEACTIVATE_REQ received from ACI/MMI
|
|  Parameters  : tra_deactivate_req
|
|
|  Return      : -
+------------------------------------------------------------------------------
*/

GLOBAL void mgt_tra_deactivate_req(T_TRA_DEACTIVATE_REQ *tra_deactivate_req)
{
  TRACE_FUNCTION ("mgt_tra_deactivate_req()");
  PACCESS        (tra_deactivate_req);

  switch (GET_STATE (MGT))
  {
  case MGT_IDLE:
    sig_mgt_tra_up_dti_disc();
    sig_mgt_tra_dn_dti_disc();
    /* no break */
  case MGT_ACTIVE:
    {
      cl_ribu_release(&tra_data->dn.ribu); /* frees downlink FIFO */
    }
    send_tra_deactivate_cnf();
    SET_STATE (MGT, MGT_INACTIVE);
    break;

  case MGT_INACTIVE:
    TRACE_EVENT("MGT was inactive!");
    break;

  default:
    TRACE_EVENT("MGT state not recognized!");
    break;
  }
  PFREE (tra_deactivate_req);

  if (GET_STATE (DTI) NEQ DTI_CLOSED)
  {
    dti_close(l2r_hDTI, TRA_DTI_UP_INSTANCE, TRA_DTI_UP_INTERFACE, TRA_DTI_UP_CHANNEL, FALSE);
    SET_STATE (DTI, DTI_CLOSED);
  }
}

/*
+------------------------------------------------------------------------------
|  Function    : mgt_tra_dti_req
+------------------------------------------------------------------------------
|  Description : Process primitive TRA_DTI_REQ received from ACI/MMI
|
|  Parameters  : tra_dti_req
|
|
|  Return      : -
+------------------------------------------------------------------------------
*/


GLOBAL void mgt_tra_dti_req(T_TRA_DTI_REQ *tra_dti_req)
{
  UBYTE isOK;

  TRACE_FUNCTION ("mgt_tra_dti_req()");
  PACCESS        (tra_dti_req);

  switch (GET_STATE (MGT))
  {
  case MGT_ACTIVE:
    if (tra_dti_req->dti_conn EQ TRA_CONNECT_DTI)
    {
      if (GET_STATE(DTI) NEQ DTI_CLOSED)
      {
        dti_close(l2r_hDTI, TRA_DTI_UP_INSTANCE, TRA_DTI_UP_INTERFACE, TRA_DTI_UP_CHANNEL, FALSE);
        SET_STATE (DTI, DTI_CLOSED);
      }
      /*
       * open new dti library communication channel
       */
      SET_STATE (DTI, DTI_SETUP);

      isOK = dti_open(
        l2r_hDTI,
        TRA_DTI_UP_INSTANCE,
        TRA_DTI_UP_INTERFACE,
        TRA_DTI_UP_CHANNEL,
        0,
        tra_dti_req->dti_direction,
        DTI_QUEUE_UNUSED,
        DTI_VERSION_10,
        (U8*)tra_dti_req->entity_name,
        tra_dti_req->link_id
        );

      if (isOK EQ FALSE)
      {
        PALLOC(tra_dti_cnf, TRA_DTI_CNF);
        SET_STATE (DTI, DTI_CLOSED);
        tra_dti_cnf->dti_conn = TRA_DISCONNECT_DTI;
        tra_dti_cnf->link_id = tra_dti_req->link_id;
        PSENDX (CTRL, tra_dti_cnf);
        PFREE(tra_dti_req);
        return;
      }
      sig_mgt_tra_dn_dti_conn_setup ();
      sig_mgt_tra_up_dti_conn_setup ();
    }
    break;

  case MGT_IDLE:
    if (tra_dti_req->dti_conn EQ TRA_DISCONNECT_DTI)
    {
      sig_mgt_tra_up_dti_disc();
      sig_mgt_tra_dn_dti_disc();
      if (GET_STATE (DTI) NEQ DTI_CLOSED)
      {
        dti_close(l2r_hDTI, TRA_DTI_UP_INSTANCE, TRA_DTI_UP_INTERFACE, TRA_DTI_UP_CHANNEL, FALSE);
        SET_STATE (DTI, DTI_CLOSED);
      }
      SET_STATE (MGT, MGT_ACTIVE);
      send_tra_dti_cnf(tra_dti_req);
    }
    break;
  }
  PFREE (tra_dti_req);
}

/*
+------------------------------------------------------------------------------
|  Function    : rcv_ra_break_ind
+------------------------------------------------------------------------------
|  Description : Process primitive RA_BREAK_IND received from RA.
|                This function is called if the RA_BREAK_IND primtive
|                is received or from the signal processing in l2r_pei.
|
|  Parameters  : ra_break_ind
|
|  Return      : -
+------------------------------------------------------------------------------
*/

GLOBAL void rcv_ra_break_ind(T_RA_BREAK_IND *ra_break_ind)
{
  U8 sa;
  U8 sb;
  U8 flow;
  USHORT break_len = ra_break_ind->break_len;

  TRACE_FUNCTION ("rcv_ra_break_ind()");

#ifdef _SIMULATION_
  PACCESS        (ra_break_ind);
#endif

  /* xxxxx not properly initialized.. */

  sa = tra_data->up.sa;  /* last sa bit in this primitive  */
  sb = tra_data->up.sb;  /* last sb bit in this primitive  */
  flow = tra_data->up.x; /* last x bit in this primitive   */

#ifdef _SIMULATION_
  PFREE(ra_break_ind);
#endif

  /* Send signal to mgt and set BREAK dti_data prim */
  sig_dn_tra_mgt_break_ind(sa, sb, flow, break_len);
}


/*
+------------------------------------------------------------------------------
|  Function    : sig_dti_tra_mgt_connection_opened_ind
+------------------------------------------------------------------------------
| Description : Handles the DTILIB callback call DTI_REASON_CONNECTION_OPENED
|
|               This signal means that a dti connection has been opened
|               successfully.
|               Since it is called directly from the dtilib callback function
|               it is handled like a primitive, here..
|
|  Parameters  : -
|  Return      : -
+------------------------------------------------------------------------------
*/
GLOBAL void sig_dti_tra_mgt_connection_opened_ind()
{
  TRACE_FUNCTION ("sig_dti_tra_mgt_connection_opened_ind()");

  if (GET_STATE (DTI) EQ DTI_SETUP)
  {
    PALLOC (tra_dti_cnf, TRA_DTI_CNF);
    TRACE_EVENT("MGT: DTI received from ACI");

    SET_STATE (DTI, DTI_IDLE);
    SET_STATE (MGT, MGT_IDLE);

    sig_mgt_tra_dn_dti_conn_open ();
    sig_mgt_tra_up_dti_conn_open ();

    tra_dti_cnf->dti_conn = TRA_CONNECT_DTI;
    if (dti_resolve_link_id (l2r_hDTI, TRA_DTI_UP_INSTANCE, TRA_DTI_UP_INTERFACE, TRA_DTI_UP_CHANNEL, &tra_dti_cnf->link_id) EQ FALSE)
    {
      TRACE_ERROR ("sig_dti_tra_mgt_connection_opened_ind(): link_id not found!");
      return; /* error, no appropriate link_id found */
    }
    PSENDX (CTRL, tra_dti_cnf);
#ifdef _TARGET_
    {
      T_RA_DATATRANS_REQ RA_datatrans_req;
      l1i_ra_datatrans_req(&RA_datatrans_req);
    }
#endif
  }
}

/*
+------------------------------------------------------------------------------
|  Function    : sig_dti_tra_mgt_connection_closed_ind
+------------------------------------------------------------------------------
| Description : Handles the DTILIB callback call DTI_REASON_CONNECTION_CLOSED
|
|               This signal means that a dti connection has been closed
|               Since it is called directly from the dtilib callback function
|               it is handled like a primitive, here..
|
|  Parameters  : -
|  Return      : -
+------------------------------------------------------------------------------
*/
GLOBAL void sig_dti_tra_mgt_connection_closed_ind()
{
  TRACE_FUNCTION ("sig_dti_tra_mgt_connection_closed_ind()");

  if (GET_STATE(DTI) NEQ DTI_CLOSED)
  {
    PALLOC (tra_dti_ind, TRA_DTI_IND);

    SET_STATE (DTI, DTI_CLOSED);

    sig_mgt_tra_up_dti_disc();
    sig_mgt_tra_dn_dti_disc();

    if (dti_resolve_link_id(l2r_hDTI, TRA_DTI_UP_INSTANCE, TRA_DTI_UP_INTERFACE, TRA_DTI_UP_CHANNEL, &tra_dti_ind->link_id) EQ FALSE)
    {
      TRACE_ERROR ("sig_dti_tra_mgt_connection_closed_ind(): link_id not found!");
      return; /* error, no appropriate link_id found */
    }
    TRACE_EVENT("MGT: DTI passed to ACI");
    PSENDX (CTRL, tra_dti_ind);
  }
}