view src/g23m-fad/ra/ra_shm.c @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-F&D (8411)
|  Modul   :  RA_SHM
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This Modul defines the functions for accessing the
|             shared memory segment between MCU and DSP
+----------------------------------------------------------------------------- 
*/ 

#ifndef RA_SHM_C
#define RA_SHM_C
#endif

#define ENTITY_RA

/*==== INCLUDES ===================================================*/

#include <string.h>
#include "typedefs.h"
#include "pconst.cdg"
#include "vsi.h"
#include "custom.h"
#include "gsm.h"
#include "cnf_ra.h"
#include "prim.h"
#include "pei.h"
#include "tok.h"
#include "ccdapi.h"
#include "ra.h"

/*==== CONST ======================================================*/
/*==== TYPES ======================================================*/
/*==== VARIABLES ==================================================*/
/*==== FUNCTIONS ==================================================*/

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)        MODULE  : RA_SHM                   |
| STATE   : code                  ROUTINE : shm_set_dsp_buffer       |
+--------------------------------------------------------------------+

  PURPOSE :
*/

GLOBAL USHORT shm_set_dsp_buffer(T_FRAME_DESC *data, register USHORT *buffer, USHORT offs, USHORT free)
{
  register UBYTE  *b;
  USHORT len, segment;

  buffer = (USHORT*) ( ( (UBYTE*) buffer ) + offs );
  /*
   * write the both segments specified by the frame descriptor data to the DSP mem.
   */
  for (segment = 0; segment < 2; segment++)
  {
    /*
     * limitate the length fields;
     */
    len = free;

    if (len > data->Len[segment])
      len = data->Len[segment];

    if (len)
    {
      data->Len[segment] -= len;
      b = data->Adr[segment];
      {
        memcpy( (UBYTE*) buffer, (UBYTE*) b, (USHORT) len );
        buffer = (USHORT*) ( ( (UBYTE*) buffer ) + len );
        free -= len;
        offs += len;
      }
    }
  }
  return offs;
}

GLOBAL U8 shm_set_dsp_buffer_new(T_FD *pFD, USHORT *buffer, U8 offs, U8 free)
{
  U8 len;

  buffer = (USHORT*)(((UBYTE*)buffer) + offs);
  /*
   * limitate the length fields;
   */
  len = MINIMUM(free, pFD->len);
  if (len)
  {
    memcpy((UBYTE*)buffer, (UBYTE*)pFD->buf, (USHORT)len);
    buffer = (USHORT*)(((UBYTE*)buffer) + len);
  }
  return len;
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)        MODULE  : RA_SHM                   |
| STATE   : code                  ROUTINE : shm_get_dsp_buffer       |
+--------------------------------------------------------------------+

  PURPOSE :

*/
GLOBAL USHORT shm_get_dsp_buffer(T_FRAME_DESC *data, register USHORT *buffer, USHORT bytes_to_read)
{
  register UBYTE  *b;
  USHORT  offs = 0;
  USHORT  len, segment;
  /*
   * read the both segments specified by the frame descriptor data from the DSP mem
   */
  for (segment = 0; segment < 2; segment++)
  {
    len = MINIMUM(data->Len[segment], bytes_to_read);
    if (len)
    {
      data->Len[segment] -= len;
      b = data->Adr[segment];
#ifdef TI_PS_16BIT_CPY
      api_memcpy((UBYTE*)b, (UBYTE*)buffer, (USHORT)len );
#else
      memcpy((UBYTE*)b, (UBYTE*)buffer, (USHORT)len );
#endif
      buffer = (USHORT*)(((UBYTE*)buffer) + len);
      bytes_to_read -= len;
      offs += len;
    }
  }
  return offs;
}

GLOBAL U8 shm_get_dsp_buffer_new(USHORT *buffer, U8 bytes_to_read, T_FD *pFD)
{
  U8 len = MINIMUM(pFD->len, bytes_to_read);
  if (len)
  {
    pFD->len = len;
#ifdef TI_PS_16BIT_CPY
    api_memcpy(pFD->buf, (UBYTE*)buffer, len);
#else
    memcpy(pFD->buf, (UBYTE*)buffer, len);
#endif
  }
  return len;
}