FreeCalypso > hg > fc-tourmaline
view src/g23m-fad/tcpip/include/rvm_priorities.h @ 303:f76436d19a7a default tip
!GPRS config: fix long-standing AT+COPS chance hanging bug
There has been a long-standing bug in FreeCalypso going back years:
sometimes in the AT command bring-up sequence of an ACI-only MS,
the AT+COPS command would produce only a power scan followed by
cessation of protocol stack activity (only L1 ADC traces), instead
of the expected network search sequence. This behaviour was seen
in different FC firmware versions going back to Citrine, and seemed
to follow some law of chance, not reliably repeatable.
This bug has been tracked down and found to be specific to !GPRS
configuration, stemming from our TCS2/TCS3 hybrid and reconstruction
of !GPRS support that was bitrotten in TCS3.2/LoCosto version.
ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3
version and had to be pulled from TCS2 - but as it turns out,
there is a new field in the MMR_REG_REQ primitive that needs to be
set correctly, and that psa_mms.c module is the place where this
initialization needed to be added.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 08 Jun 2023 08:23:37 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/**************************************************************************** * * * Name rvm_priorities.h * * * * Function this file priorities defintitions for basic SWEs * * It includes a file rvm_ext_priorities.h where are defined * * "custom" priorities. * * * * Version 0.1 * * * * Date Modification * * ------------------------------------ * * 10/11/2000 Create * * * * Author Cristian Livadiotti (c-livadiotti@ti.com) * * * * (C) Copyright 2000 by Texas Instruments Incorporated, All Rights Reserved* ****************************************************************************/ #ifndef __RVM_PRIORITIES_H_ #define __RVM_PRIORITIES_H_ #include "rvm_ext_priorities.h" /* PRIORITIES SETTING: */ /* All user priority should be set under 250: */ /* Higher values are reserved */ /* ** Bluetooth Priorities: ** All set to same value, except ATP (not a task) and HCI (valid on PC only) */ #define RVM_HCI_TASK_PRIORITY (250) #define RVM_L2CAP_TASK_PRIORITY (240) #define RVM_BTCTRL_TASK_PRIORITY (240) #define RVM_RFCOMM_TASK_PRIORITY (240) #define RVM_SPP_TASK_PRIORITY (240) #define RVM_SDP_TASK_PRIORITY (240) #define RVM_HSG_TASK_PRIORITY (240) #define RVM_DUN_GW_TASK_PRIORITY (240) #define RVM_FAX_GW_TASK_PRIORITY (240) #define RVM_ATP_UART_TASK_PRIORITY (240) #define RVM_ATP_TASK_PRIORITY (255) /* ** Drivers and Services Priorities ** Note: FFS priority should be lower than every user */ #define RVM_SPI_TASK_PRIORITY (39) #define RVM_TTY_TASK_PRIORITY (240) #define RVM_AUDIO_TASK_PRIORITY (245) #define RVM_AUDIO_BGD_TASK_PRIORITY (246) #define RVM_RTC_TASK_PRIORITY (248) #define RVM_FFS_TASK_PRIORITY (250) #define RVM_TRACE_TASK_PRIORITY (251) #define RVM_DAR_TASK_PRIORITY (245) #define RVM_ETM_TASK_PRIORITY (249) #define RVM_MKS_TASK_PRIORITY (255) #define RVM_KPD_TASK_PRIORITY (10) #define RVM_MPM_TASK_PRIORITY (242) #define RVM_RNET_WS_TASK_PRIORITY (80) #define RVM_RNET_RT_TASK_PRIORITY (240) #define RVM_DCM_TASK_PRIORITY (240) #define RVM_MFW_TASK_PRIORITY (245) /* ** RV Test Menu and Dummy Tasks Priorities */ #define RVM_RVTEST_MENU_TASK_PRIORITY (240) #define RVM_DUMMY_TASK_PRIORITY (80) //#define IDLE_TASK_PRIORITY (80) /* A-M-E-N-D-E-D! */ #define RVM_INVKR_TASK_PRIORITY (240) /* A-M-E-N-D-E-D! */ #define RVM_TE1_TASK_PRIORITY (240) /* A-M-E-N-D-E-D! */ #define RVM_TE2_TASK_PRIORITY (240) /* A-M-E-N-D-E-D! */ #define RVM_TE3_TASK_PRIORITY (240) /* A-M-E-N-D-E-D! */ #define RVM_TE4_TASK_PRIORITY (240) /* A-M-E-N-D-E-D! */ #define RVM_TE5_TASK_PRIORITY (240) /* A-M-E-N-D-E-D! */ #define RVM_TE6_TASK_PRIORITY (240) /* A-M-E-N-D-E-D! */ #define RVM_TMS_TASK_PRIORITY (200) /* A-M-E-N-D-E-D! */ #endif /* __RVM_PRIORITIES_H_ */