view src/g23m-fad/tcpip/rnet/rnet_ip_addr.h @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/**
 * @file  ipv4/rnet_ip_addr.h
 *
 * Riviera NET.
 *
 * IPv4 address related structures.
 * See the Readme.txt file.
 *
 * @author  Vincent Oberle (v-oberle@ti.com)
 * @version 0.1
 */

/*
 * History:
 *
 *   Date         Author        Modification
 *  --------------------------------------------------
 *  01/25/2002  Vincent Oberle    Create
 *
 * (C) Copyright 2002 by Texas Instruments Incorporated, All Rights Reserved
 */

#ifndef __RNET_IP_ADDR_H_
#define __RNET_IP_ADDR_H_

#include "rv_general.h"

#ifdef __cplusplus
extern "C"
{
#endif

/**
 * @name  IPv4 address.
 *
 * T_RNET_IP_ADDR is the IPv4 address type.
 *
 * The RNET_IP_ADDR_ANY value corresponds to any IP address.
 * The RNET_IP4_ADDR allows easy creation of IP addresses.
 */
/*@{*/
typedef UINT32 T_RNET_IP_ADDR;

#define RNET_IP_ADDR_ANY 0

#define RNET_IP4_ADDR(ipaddr, a,b,c,d) { \
  ipaddr = ((UINT32)(a & 0xff) << 24) | ((UINT32)(b & 0xff) << 16) | \
       ((UINT32)(c & 0xff) << 8) | (UINT32)(d & 0xff); \
}
/*@}*/

/**
 * Port. 16 bits.
 */
typedef UINT16 T_RNET_PORT;

#ifdef __cplusplus
}
#endif

#endif /* __RNET_IP_ADDR_H_ */