view src/g23m-gprs/sndcp/sndcp_sdaf.h @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GPRS (8441)
|  Modul   :  sndcp_sdaf.h
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved.  
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for sndcp_sdaf.c 
+----------------------------------------------------------------------------- 
*/ 

/*---- HISTORY --------------------------------------------------------------*/
#if 0

  $Log:: /GPRS/Condat/MS/SRC/SNDCP/sndcp_sdaf.h                            $
 * 
 * 8     15.05.00 16:55 Hk
 * T H E   E N D.
 * 
 * 7     15.05.00 16:16 Hk
 * backup.
 * 
 * 6     9.05.00 18:59 Hk
 * XID negotiation work in progress. Backup.
 * 
 * 5     18.04.00 18:47 Hk
 * Backup. Work on XID negotiation.
 * 
 * 4     30.03.00 16:04 Hk
 * 
 * 3     17.03.00 18:03 Hk
 * Acknowledged data transfer is now implemented and tested uplink and
 * downlink.
 * 
 * 2     10.03.00 17:49 Hk
 * Backup. First downlink ack data transfer ok (case 700).
 * 
 * 1     10.03.00 11:43 Hk
 * Initial.
 * 
 

#endif

#ifndef SNDCP_SDAF_H
#define SNDCP_SDAF_H

/*
 * Convenience functions, not in SDL
 */
EXTERN BOOL sda_f_bit (T_LL_DATA_IND* ll_data_ind);
EXTERN UBYTE sda_get_pcomp (T_LL_DATA_IND* ll_data_ind);
EXTERN BOOL sda_m_bit (T_LL_DATA_IND* ll_data_ind);

EXTERN void sda_is_seg_valid(T_LL_DATA_IND* ll_data_ind,
                         BOOL* valid);
EXTERN void sda_is_nsapi_rec (UBYTE nsapi, BOOL* b);

EXTERN void sda_set_nsapi_rec(UBYTE nsapi, BOOL b);

EXTERN void sda_ac_f_f0 (T_LL_DATA_IND* ll_data_ind);

EXTERN void sda_ac_f_f1_m0 (T_LL_DATA_IND* ll_data_ind);

EXTERN void sda_ac_f_f1_m1 (T_LL_DATA_IND* ll_data_ind);

EXTERN void sda_ac_s_f0_m0 (T_LL_DATA_IND* ll_data_ind);

EXTERN void sda_ac_s_f0_m1 (T_LL_DATA_IND* ll_data_ind);

EXTERN void sda_ac_s_f1_m0 (T_LL_DATA_IND* ll_data_ind);

EXTERN void sda_ac_s_f1_m1 (T_LL_DATA_IND* ll_data_ind);

EXTERN void sda_delete_cur_sn_data_ind (U8 nsapi);

EXTERN void sda_get_data_if_nec (UBYTE sapi);

EXTERN void sda_init (void);

EXTERN void sda_get_nsapi(T_LL_DATA_IND* ll_data_ind, UBYTE* nsapi);

#endif /* !SNDCP_SDF_H */