view src/gpf/ccd/ccd_inc.mk @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents 4e78acac3d88
children
line wrap: on
line source

#----------------------------------------------------------------------------- 
#  Project :  
#  Modul   :  ccd_inc.mk
#----------------------------------------------------------------------------- 
#  Copyright 2002 Texas Instruments Berlin, AG 
#                 All rights reserved. 
# 
#                 This file is confidential and a trade secret of Texas 
#                 Instruments Berlin, AG 
#                 The receipt of or possession of this file does not convey 
#                 any rights to reproduce or disclose its contents or to 
#                 manufacture, use, or sell anything it may describe, in 
#                 whole, or in part, without the specific written consent of 
#                 Texas Instruments Berlin, AG. 
#----------------------------------------------------------------------------- 
# Purpose : Some general definition also used in CCD\util.
#----------------------------------------------------------------------------- 

#-------------------------Suffixes for the name of the output file
#---------e.g. ccd_tr_rt_po_db.lib

ifdef TOOL_CHOICE
  TSDIR:=/ts$(TOOL_CHOICE)
  tsTail  :=_ts$(TOOL_CHOICE)
else
  TSDIR:=
endif

ifeq ($(TRACE), 1)
   trTail :=_tr
   TRACEDIR=/trace
else 
   trTail:=
   TRACEDIR=
endif

ifeq ($(MEMSUPER), 1)
  PSDIR=/ps
  pstail :=_ps
else
  PSDIR=
  pstail:=
endif

ifeq ($(DEBUG), 1)
   DEBUGDIR=/debug
   dbTail :=_db
else 
   DEBUGDIR=
   dbTail:=
endif

SECTION=
secTail=
ifeq ($(RUN_FLASH), 1)
  SECTION=/fl
  secTail:=_fl
endif
ifeq ($(RUN_INT_RAM), 1)
  SECTION=/ir
  secTail:=_ir
endif

ifeq ($(TARGET), nuc)
   tTail :=_na7
   ifeq ($(PLATFORM), arm7)
      tTail :=_na7
      ifeq ($(DYNARR), 1)
        DADIR=/da
        datail :=_da
      else
        DADIR=
        datail:=
      endif
   else
      ifeq ($(PLATFORM), arm9)
         tTail :=_na9
      else
        ifeq ($(PLATFORM), pc)
           tTail :=_npc
        endif #pc
      endif #arm9
   endif #arm7
else
   ifeq ($(TARGET), win32)
     tTail :=_wn
   else
     ifeq ($(TARGET), linuxpc)
      tTail :=_lpc
      OSENV=sus
     else
       ifeq ($(TARGET), rtlpc)
        tTail :=_rlp
        OSENV=sus
        RTL_VERSION=2.0
        RTL_DIR=/opt/rtldk-$(RTL_VERSION)/rtlinuxpro
        include $(RTL_DIR)/rtl.mk
       else
         ifeq ($(TARGET), linuxarm)
          tTail :=_la9
          OSENV=sus
          else
           ifeq ($(TARGET), solsparc)
            tTail :=_ssp
            OSENV=sus
            BYTESEX=motorola
           endif #solsparc
         endif #linuxarm
       endif #rtlpc
     endif #linuxpc
   endif #win32  
endif #nuc

XXX:=$(tTail)$(trTail)$(dbTail)$(pstail)$(datail)$(secTail)$(tsTail)