view src/gpf/ccd/gsm2_t.c @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  
|  Modul   : gsm2_t.c
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definition of encoding and decoding functions for GSM2_T elements 
+----------------------------------------------------------------------------- 
*/ 


/*
 * standard definitions like GLOBAL, UCHAR, ERROR etc.
 */
#include "typedefs.h"
#include "header.h"

/*
 * Prototypes of ccd (USE_DRIVER EQ undef) for prototypes only
 * look at ccdapi.h
 */
#undef USE_DRIVER
#include "ccdapi.h"

/*
 * Types and functions for bit access and manipulation
 */
#include "ccd_globs.h"
#include "bitfun.h"

/*
 * Prototypes of ccd internal functions
 */
#include "ccd.h"

/*
 * Declaration of coder/decoder tables
 */
#include "ccdtable.h"
#include "ccddata.h"

#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : CCD (6144)                 MODULE  : CDC_GSM             |
| STATE   : code                       ROUTINE : cdc_gsm2t_decode    |
+--------------------------------------------------------------------+

  PURPOSE : Decoding of the GSM Type 2T element. This element
            consists only of a 8 Bit T component.

*/

SHORT cdc_gsm2t_decode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs)
{
  T_TLV_SORT tlv_inf;
  
  tlv_inf.gotTag = TRUE;
  tlv_inf.gotLen = FALSE;
  
#ifdef DEBUG_CCD
  #ifndef CCD_SYMBOLS
  TRACE_CCD (globs, "cdc_gsm2t_decode()");
  #else
  TRACE_CCD (globs, "cdc_gsm2t_decode() %s", ccddata_get_alias((USHORT) e_ref, 1));
  #endif
#endif

  return cdc_tlv_decode (c_ref, e_ref, &tlv_inf, globs);
}
#endif /* !RUN_INT_RAM */

#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : CCD (6144)                 MODULE  : CDC_GSM             |
| STATE   : code                       ROUTINE : cdc_gsm2t_encode    |
+--------------------------------------------------------------------+

  PURPOSE : Encoding of the GSM Type 2T element. This element
            consists only of a 8 Bit T component.

*/

SHORT cdc_gsm2t_encode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs)
{
#ifdef DEBUG_CCD
  #ifndef CCD_SYMBOLS
  TRACE_CCD (globs, "cdc_gsm2t_encode()");
  #else
  TRACE_CCD (globs, "cdc_gsm2t_encode() %s", ccddata_get_alias((USHORT) e_ref, 1));
  #endif
#endif

  cdc_tlv_encode (e_ref, 8, 0, globs);  

  return 1;
}  
#endif /* !RUN_INT_RAM */