FreeCalypso > hg > fc-tourmaline

view src/gpf/ccd/mall.bat @ 303:f76436d19a7a default tip

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents 4e78acac3d88
children
line wrap: on
line source

@echo off
rem build all CCD variants
setlocal

set name=CCD
set name_small=ccd 
set err_file=..\%name_small%.err

@if x%_4ver% == x goto need4nt
@if x%1 == x-help goto help
@if x%1 == x-guitest goto guitest
@if x%1 == x-test goto test

REM default is gnumake:
set M=gnumake -r
REM use clearmake if under ClearCase
set IN_VOB=FALSE
REM is clearcase installed ?
if "%CLEARCASE_PRIMARY_GROUP%" == "" goto options
REM are we using a clearcase view ?
cleartool lsview -cview >nul 2>>&1
if errorlevel 1 goto options
REM on a clearcase view: use clearmake in gnu mode:
set M=clearmake -V -C gnu
set IN_VOB=TRUE

:options
REM set default options
set clean=0
set def_ver=DEV_BUILD
set ver=0
set maketarget=colibs all
REM parse command line options
:parse_opt
iff "%1" == "-gmake" then
  set M=gnumake -r
elseiff "%1" == "-clean" then
  iff "%maketarget%" == "colibs all cilibs" then
	  echo mall: option -clean ignored when -exp is given
	else
    set maketarget=clean
  endiff
elseiff "%1" == "-l" then
  iff "%2" == "" then
    echo error: no label name specified !
    goto help
  endiff
  set ver=%2
  shift
elseiff "%1" == "-exp" then
  iff %maketarget% == clean then
    echo mall: option -exp ignored when -clean is given
  else
    set maketarget=colibs all cilibs
  endiff
elseiff "%1" == "-n" then
  set M=echo
  shift
elseiff "%1" != "" then
  goto help
endiff
shift
if "%1" != "" goto parse_opt 

if exist %err_file% del %err_file% >nul

if %ver% != 0 echo "using label %ver% (not implemented yet) ..."

iff %maketarget% == clean then
  echo *** cleaning CCD libs *** | tee /a %err_file%
else
  echo *** making CCD libs *** | tee /a %err_file%
endiff

rem nuc Libraries
:arm7
echo ********** nuc arm7        **********        | tee /a %err_file%
echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=0 TRACE=0 MEMSUPER=0 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=0 TRACE=0 MEMSUPER=0 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=0 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=0 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=0 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=0 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=1 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=1 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=1 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=1 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err
rem ********** nuc arm7: splitted libraries ir/fl
rem RUN_FLASH=1 RUN_INT_RAM=0
echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=0 TRACE=0 MEMSUPER=0 RUN_FLASH=1 RUN_INT_RAM=0 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=0 TRACE=0 MEMSUPER=0 RUN_FLASH=1 RUN_INT_RAM=0 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=0 RUN_FLASH=1 RUN_INT_RAM=0 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=0 RUN_FLASH=1 RUN_INT_RAM=0 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=0 RUN_FLASH=1 RUN_INT_RAM=0 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=0 RUN_FLASH=1 RUN_INT_RAM=0 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=1 RUN_FLASH=1 RUN_INT_RAM=0 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=1 RUN_FLASH=1 RUN_INT_RAM=0 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=1 RUN_FLASH=1 RUN_INT_RAM=0 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=1 RUN_FLASH=1 RUN_INT_RAM=0 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

rem RUN_FLASH=0 RUN_INT_RAM=1
echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=0 TRACE=0 MEMSUPER=0 RUN_FLASH=0 RUN_INT_RAM=1 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=0 TRACE=0 MEMSUPER=0 RUN_FLASH=0 RUN_INT_RAM=1 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=0 RUN_FLASH=0 RUN_INT_RAM=1 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=0 RUN_FLASH=0 RUN_INT_RAM=1 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=0 RUN_FLASH=0 RUN_INT_RAM=1 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=0 RUN_FLASH=0 RUN_INT_RAM=1 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=1 RUN_FLASH=0 RUN_INT_RAM=1 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=1 RUN_FLASH=0 RUN_INT_RAM=1 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=1 RUN_FLASH=0 RUN_INT_RAM=1 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=1 RUN_FLASH=0 RUN_INT_RAM=1 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo ********** nuc arm7 ts3    **********        | tee /a %err_file%
echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=0 TRACE=0 MEMSUPER=0 TOOL_CHOICE=3 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=0 TRACE=0 MEMSUPER=0 TOOL_CHOICE=3 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=0 TOOL_CHOICE=3 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=0 TOOL_CHOICE=3 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=0 TOOL_CHOICE=3 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=0 TOOL_CHOICE=3 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=1 TOOL_CHOICE=3 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=1 TOOL_CHOICE=3 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=1 TOOL_CHOICE=3 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=1 TOOL_CHOICE=3 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

rem ********** nuc arm7 ts3 + DYNARR=1
echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=0 TRACE=0 MEMSUPER=0 TOOL_CHOICE=3 DYNARR=1 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=0 TRACE=0 MEMSUPER=0 TOOL_CHOICE=3 DYNARR=1 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=0 TOOL_CHOICE=3 DYNARR=1 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=0 TOOL_CHOICE=3 DYNARR=1 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=0 TOOL_CHOICE=3 DYNARR=1 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=0 TOOL_CHOICE=3 DYNARR=1 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=1 TOOL_CHOICE=3 DYNARR=1 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=1 TOOL_CHOICE=3 DYNARR=1 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=1 TOOL_CHOICE=3 DYNARR=1 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=1 TOOL_CHOICE=3 DYNARR=1 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo ********** nuc arm9 ts3    **********        | tee /a %err_file%
echo %M% TARGET=nuc PLATFORM=arm9 DEBUG=0 TRACE=0 MEMSUPER=0 TOOL_CHOICE=3 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm9 DEBUG=0 TRACE=0 MEMSUPER=0 TOOL_CHOICE=3 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm9 DEBUG=1 TRACE=0 MEMSUPER=0 TOOL_CHOICE=3 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm9 DEBUG=1 TRACE=0 MEMSUPER=0 TOOL_CHOICE=3 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm9 DEBUG=1 TRACE=1 MEMSUPER=1 TOOL_CHOICE=3 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm9 DEBUG=1 TRACE=1 MEMSUPER=1 TOOL_CHOICE=3 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo ********** nuc arm9 ts6    **********        | tee /a %err_file%
echo %M% TARGET=nuc PLATFORM=arm9 DEBUG=0 TRACE=0 MEMSUPER=0 TOOL_CHOICE=6 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm9 DEBUG=0 TRACE=0 MEMSUPER=0 TOOL_CHOICE=6 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm9 DEBUG=1 TRACE=0 MEMSUPER=0 TOOL_CHOICE=6 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm9 DEBUG=1 TRACE=0 MEMSUPER=0 TOOL_CHOICE=6 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm9 DEBUG=1 TRACE=1 MEMSUPER=1 TOOL_CHOICE=6 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm9 DEBUG=1 TRACE=1 MEMSUPER=1 TOOL_CHOICE=6 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo ********** nuc pc          **********        | tee /a %err_file%
echo %M% TARGET=nuc PLATFORM=pc DEBUG=0 TRACE=0 MEMSUPER=0 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=pc DEBUG=0 TRACE=0 MEMSUPER=0 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=pc DEBUG=1 TRACE=0 MEMSUPER=0 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=pc DEBUG=1 TRACE=0 MEMSUPER=0 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=pc DEBUG=1 TRACE=1 MEMSUPER=0 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=pc DEBUG=1 TRACE=1 MEMSUPER=0 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=pc DEBUG=1 TRACE=1 MEMSUPER=1 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=pc DEBUG=1 TRACE=1 MEMSUPER=1 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

rem win32 Libraries
echo ********** win32           **********        | tee /a %err_file%
echo %M% TARGET=win32 DEBUG=0 TRACE=0 %maketarget% >>%err_file%
%M% TARGET=win32 DEBUG=0 TRACE=0 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=win32 DEBUG=1 TRACE=1 %maketarget% >>%err_file%
%M% TARGET=win32 DEBUG=1 TRACE=1 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

goto final

:help
text
usage:
mall {-help | 
      { [-l <LABEL>] | -clean | -exp | -gmake } 
     }
example: mall -l CCD_1.7.1 
-clean: clean objects
-exp  : export, i.e. checkin the built items
-gmake: use gnumake anyhow
endtext
goto end

:guitest
text
Tool without GUI - in consequence no GUI test implemented
endtext
goto end

:test
text
Test CCD functionality with GPF teststack:
- Change to /gpf/util/teststack:
- Call </gpf/util/teststack/mall.bat> to build teststack
- Call </gpf/util/teststack/mall.bat -test> to build and execute testsuite 
endtext
goto end

:need4nt
@echo Error: 4DOS or 4NT is needed
goto end

:err
grep "error " %err_file% 
@echo Errors occured ! See %err_file% for details.
endlocal
quit 1

:final
grep "warning " %err_file% 2> nul 

:end
endlocal
quit 0