view src/gpf/frame/vsi_tim.c @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/* 
+------------------------------------------------------------------------------
|  File:       vsi_tim.c
+------------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This Module defines the virtual system interface part
|             for the timer handling.
+----------------------------------------------------------------------------- 
*/ 

#ifndef __VSI_TIM_C__
#define __VSI_TIM_C__
#endif

/*==== INCLUDES ===================================================*/

#include "typedefs.h"
#include "string.h"

#include "vsi.h"
#include "os.h"
#include "tools.h"
#include "frm_defs.h"
#include "frm_types.h"
#include "frm_glob.h"
#include "frame.h"

/*==== TYPES ======================================================*/

typedef struct _T_TIMER_CONFIG_ENTRY
{
  T_HANDLE entity;
  T_TIME   value;
  USHORT   index;
  USHORT   mode;
  struct _T_TIMER_CONFIG_ENTRY *next;
} T_TIMER_CONFIG_ENTRY;

/*==== CONSTANTS ==================================================*/

LOCAL const T_STR_IND StrInd[] = 
{       
  "TIMER_SET",        TIMER_SET,
  "TIMER_RESET",      TIMER_RESET,
  "TIMER_SPEED_UP",   TIMER_SPEED_UP,
  "TIMER_SLOW_DOWN",  TIMER_SLOW_DOWN,
  "TIMER_SUPPRESS",   TIMER_SUPPRESS,
  "TIMER_CLEAN",      TIMER_CLEAN,
  NULL,               0
};

/*==== EXTERNALS ==================================================*/
/* -------------- S H A R E D - BEGIN ---------------- */
#ifdef _TOOLS_
#pragma data_seg("FRAME_SHARED") 
#endif

extern OS_HANDLE ext_data_pool_handle;
extern T_HANDLE TimerHandleField[];

/*==== VARIABLES ==================================================*/

#ifndef RUN_INT_RAM
char timer_configured;
T_TIMER_CONFIG_ENTRY *t_config;
#else
extern char timer_configured;
extern T_TIMER_CONFIG_ENTRY *t_config;
#endif

#ifdef _TOOLS_
#pragma data_seg()
#endif
/* -------------- S H A R E D - END ---------------- */

/*==== FUNCTIONS ==================================================*/

int GetTimerStartValue ( T_HANDLE Caller, USHORT TimerIndex, T_TIME OrgValue, T_TIME *NewValue );

#ifndef RUN_FLASH
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-Frame (8415)           MODULE  : VSI_TIM             |
| STATE   : code                       ROUTINE : GetTimerStartValue  |
+--------------------------------------------------------------------+

  PURPOSE : get start time modified by dynamic configuration

*/

int GetTimerStartValue ( T_HANDLE caller, USHORT index, T_TIME org_value, T_TIME *new_value )
{
T_TIMER_CONFIG_ENTRY *t_config_entry;
int found;
  
  if ( t_config != NULL )
  {
    found = FALSE;
    t_config_entry = t_config;
    while ( found == FALSE && t_config_entry != NULL )
    {
      if ( t_config_entry->entity == caller
        && t_config_entry->index  == index )
      {
        found = TRUE;
        switch (t_config_entry->mode)
        {
          case TIMER_SET:
            *new_value = t_config_entry->value;
          break;

          case TIMER_RESET:
            *new_value = org_value;
          break;

          case TIMER_SPEED_UP:
            *new_value = org_value / t_config_entry->value;
          break;

          case TIMER_SLOW_DOWN:
            *new_value = org_value * t_config_entry->value;
          break;

          default:
          return VSI_ERROR;
        }
        vsi_o_ttrace ( caller, TC_TIMER, "Timerstart: Index %d, Time %d -> %d",index, org_value, *new_value );
      }
      t_config_entry = t_config_entry->next;
    }
    if ( found == FALSE )
    {
      *new_value = org_value;
    }
  }
  else
  {
    *new_value = org_value;
  }
  if (*new_value == 0)
  {
    *new_value = 1;
  }
  return VSI_OK;
}
#endif

#ifndef RUN_FLASH
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-Frame (8415)           MODULE  : VSI_TIM             |
| STATE   : code                       ROUTINE : vsi_t_start         |
+--------------------------------------------------------------------+

  PURPOSE : start timer that expires only once

*/

int vsi_t_start (T_HANDLE Caller, USHORT TimerIndex, T_TIME Value)
{
OS_HANDLE TimerHandle;

  vsi_o_ttrace ( Caller, TC_TIMER, "Timerstart: Index %d, Time %d",TimerIndex, Value) ;

  if ( TimerIndex >= pf_TaskTable[Caller].NumOfTimers )
    vsi_o_assert( NO_TASK, OS_SYST_ERR_TASK_TIMER, __FILE__, __LINE__, 
                  "TimerIndex > NumOfTimers for entity %s", pf_TaskTable[Caller].Name );

  TimerHandle = (*(pf_TaskTable[Caller].FirstTimerEntry + TimerIndex) & TIMER_HANDLE_MASK);
  
  if ( !TimerHandle )
  {
    if ( os_CreateTimer ( Caller, pf_Timeout, &TimerHandle, pf_TaskTable[Caller].MemPoolHandle ) == OS_ERROR ) 
      vsi_o_assert( Caller, OS_SYST_ERR_SIMUL_TIMER, __FILE__, __LINE__, 
                    "Number of started timers > MAX_SIMULTANEOUS_TIMER" );
  }
  if ( timer_configured && GetTimerStartValue ( Caller, TimerIndex, Value, &Value ) == VSI_ERROR )
    return VSI_ERROR;

  *(pf_TaskTable[Caller].FirstTimerEntry + TimerIndex) = TimerHandle;

  if ( os_StartTimer ( Caller, TimerHandle, TimerIndex, Value, 0 ) == OS_ERROR )
    return VSI_ERROR;

  return VSI_OK;
}
#endif

#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-Frame (8415)           MODULE  : VSI_TIM             |
| STATE   : code                       ROUTINE : vsi_t_pstart        |
+--------------------------------------------------------------------+

  PURPOSE : start periodic timer

*/

int vsi_t_pstart (T_HANDLE Caller, USHORT TimerIndex, T_TIME Value1, T_TIME Value2 )
{
OS_HANDLE TimerHandle;

  vsi_o_ttrace ( Caller, TC_TIMER, "Timerstart: Index %d, ITime %d PTime %d",TimerIndex, Value1, Value2) ;

  if ( TimerIndex >= pf_TaskTable[Caller].NumOfTimers )
    vsi_o_assert( NO_TASK, OS_SYST_ERR_TASK_TIMER, __FILE__, __LINE__, 
                  "TimerIndex > NumOfTimers for entity %s", pf_TaskTable[Caller].Name );

  TimerHandle = (*(pf_TaskTable[Caller].FirstTimerEntry + TimerIndex) & TIMER_HANDLE_MASK);
  
  if ( !TimerHandle )
  {
    if ( os_CreateTimer ( Caller, pf_Timeout, &TimerHandle, pf_TaskTable[Caller].MemPoolHandle ) == OS_ERROR ) 
      vsi_o_assert( Caller, OS_SYST_ERR_SIMUL_TIMER, __FILE__, __LINE__, 
                    "Number of started timers > MAX_SIMULTANEOUS_TIMER" );
  }

  if ( timer_configured && GetTimerStartValue ( Caller, TimerIndex, Value1, &Value1 ) == VSI_ERROR )
    return VSI_ERROR;

  if ( timer_configured && GetTimerStartValue ( Caller, TimerIndex, Value2, &Value2 ) == VSI_ERROR )
    return VSI_ERROR;

  *(pf_TaskTable[Caller].FirstTimerEntry + TimerIndex) = TimerHandle | PERIODIC_TIMER;

  if ( os_StartTimer ( Caller, TimerHandle, TimerIndex, Value1, Value2 ) == OS_ERROR )
    return VSI_ERROR;

  return VSI_OK;
}
#endif

#ifndef RUN_FLASH
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-Frame (8415)           MODULE  : VSI_TIM             |
| STATE   : code                       ROUTINE : vsi_t_stop          |
+--------------------------------------------------------------------+

  PURPOSE : stop timer

*/

int vsi_t_stop (T_HANDLE Caller, USHORT TimerIndex )
{
OS_HANDLE TimerHandle;

  vsi_o_ttrace ( Caller, TC_TIMER, "Timerstop:  Index %d",TimerIndex) ;
  TimerHandle = (*(pf_TaskTable[Caller].FirstTimerEntry + TimerIndex) & TIMER_HANDLE_MASK);
  if ( TimerHandle && ( (TimerHandle & TIMER_HANDLE_MASK) < MaxTimer ) ) 
  {
/*
    if ( os_StopTimer ( Caller, TimerHandle ) == OS_ERROR )
      return VSI_ERROR;    

    if ( os_DestroyTimer ( Caller, TimerHandle ) == OS_ERROR )
      return VSI_ERROR;  
*/
    os_StopTimer ( Caller, TimerHandle );
    os_DestroyTimer ( Caller, TimerHandle );

    *(pf_TaskTable[Caller].FirstTimerEntry + TimerIndex) = 0;
    return VSI_OK;
  }
  return VSI_ERROR;

}
#endif

#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-Frame (8415)           MODULE  : VSI_TIM             |
| STATE   : code                       ROUTINE : vsi_t_status        |
+--------------------------------------------------------------------+

  PURPOSE : request remaining time 

*/

int vsi_t_status (T_HANDLE Caller, USHORT Index, T_TIME *Value )
{
OS_HANDLE TimerHandle;

  if ( (TimerHandle = (*(pf_TaskTable[Caller].FirstTimerEntry + Index) & TIMER_HANDLE_MASK) ) < MaxTimer )  
  {
    if ( TimerHandle == 0 || (*(pf_TaskTable[Caller].FirstTimerEntry + Index) & TIMEOUT_OCCURRED) )
    {
      *Value = 0;
      vsi_o_ttrace ( Caller, TC_TIMER, "Timerstatus: Index %d, Remaining_time %d",Index, *Value) ;
      return VSI_OK;
    }
    /* 
       In case the timer interrupt occurrs just after the check 5 lines above, this will be handled by
       os_QueryTimer() returning a Value of 0 because thew expired timer can no longer be found in the list.
    */
    if ( os_QueryTimer ( Caller, TimerHandle, Value ) == OS_ERROR )
    {
      *Value = 0;
      return VSI_ERROR; 
    }
    vsi_o_ttrace ( Caller, TC_TIMER, "Timerstatus: Index %d, Remaining time %d",Index, *Value) ;
    return VSI_OK;
  }
  vsi_o_ttrace ( Caller, TC_TIMER, "TimerHandle out of range: Index %d, TimerHandle %d",Index, TimerHandle ) ;
  return VSI_ERROR;  

}
#endif

#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-Frame (8415)           MODULE  : VSI_TIM             |
| STATE   : code                       ROUTINE : vsi_t_config        |
+--------------------------------------------------------------------+

  PURPOSE : timer configuration

*/
int vsi_t_config (T_HANDLE caller, USHORT index, UBYTE mode, ULONG value )
{
T_TIMER_CONFIG_ENTRY *t_config_entry = NULL;
T_TIMER_CONFIG_ENTRY *t_next_entry;
T_TIMER_CONFIG_ENTRY *t_new_entry = NULL;
int found = FALSE;

  if ( index < pf_TaskTable[caller].NumOfTimers )
  {
    if ( t_config != NULL )
    {
      t_next_entry = t_config;
      do
      {
        t_config_entry = t_next_entry;
        if ( t_config_entry->entity == caller
          && t_config_entry->index  == index )
        {
          found = TRUE;
          break;
        }
        t_next_entry = t_config_entry->next;
      } while ( t_next_entry != NULL );
    }

    if ( found == FALSE )
    {
      if ( os_AllocateMemory ( caller, (T_VOID_STRUCT**)&t_new_entry, sizeof(T_TIMER_CONFIG_ENTRY), OS_NO_SUSPEND, ext_data_pool_handle ) == OS_TIMEOUT )
        return VSI_ERROR;
      t_new_entry->next = NULL;
    }

    if ( t_config == NULL )
    {
      t_config       = t_new_entry;
      t_config_entry = t_new_entry;
    }
    else
    {
      if ( found == FALSE && t_config_entry != NULL )
      {
        t_config_entry->next = t_new_entry;
        t_config_entry       = t_new_entry;
      }
    }

    if ( t_config_entry != NULL )
    {
      t_config_entry->entity = caller;
      t_config_entry->index  = index;
      t_config_entry->mode   = mode;
      t_config_entry->value  = value;
      timer_configured = TRUE;
      return VSI_OK;
    }
  }
  return VSI_ERROR;
}
#endif

#ifndef RUN_INT_RAM
/*
+------------------------------------------------------------------------------
|  Function     :  _vsi_t_config
+------------------------------------------------------------------------------
|  Description  :  Parse a timer configuration string into the components
|                  timer index, timer mode, timer value.
|
|  Parameters   :  Caller     - calling task
|                  *CfgString - configuration string
|                  *pTable    - pointer to configuration string table
|
|  Return       :  VSI_OK
|                  VSI_ERROR
+------------------------------------------------------------------------------
*/
int _vsi_t_config ( T_HANDLE Caller, char *CfgString, const T_STR_IND *pTable )
{
T_TIMER_CONFIG_ENTRY *t_config_entry;
T_TIMER_CONFIG_ENTRY *t_next;
char token[20];
unsigned int offset = 0,len;
USHORT Index;
BYTE Mode;
int i = 0;
unsigned int Value;

  if ( pTable != NULL )
  {
    len = GetNextToken (CfgString, token, " #");
    offset = offset + len +1;
    while ( StrInd[i].Str && strcmp ( token, StrInd[i].Str ) )
    { i++; }
    if ( StrInd[i].Str == NULL )
      return VSI_ERROR;

    if ( (Mode = (BYTE)StrInd[i].Ind) == TIMER_CLEAN )
    {
      t_config_entry = t_config;
      while ( t_config_entry != NULL )
      {
        t_next = t_config_entry->next;
        os_DeallocateMemory ( Caller, (T_VOID_STRUCT*)t_config_entry );
        t_config_entry = t_next;
      }
      t_config = NULL;
      return VSI_OK;
    }
    len = GetNextToken (CfgString+offset, token, " #");
    offset = offset + len +1;
    while ( pTable->Str && strcmp ( token, pTable->Str ) )
    { pTable++; }
    if ( pTable->Str == NULL )
    { 
      vsi_o_ttrace ( 0, TC_SYSTEM, "Timer not found!") ;
      return VSI_OK;  /* VSI_OK is returned to avoid creating a new return code */
    }
    Index = pTable->Ind;
    len = GetNextToken (CfgString+offset, token, " #");
    Value = ASCIIToHex (token, CHARS_FOR_32BIT);
 
    return ( vsi_t_config ( Caller, Index, Mode, Value ) );
  }
  return VSI_ERROR;

}
#endif

#ifndef RUN_INT_RAM
/*
+---------------------------------------------------------------------+
| PROJECT : GSM-Frame (8415)           MODULE  : VSI_TIM              |
| STATE   : code                       ROUTINE : InitializeTimerConfig|
+---------------------------------------------------------------------+

  PURPOSE : initialize timer configuration

*/ 

void InitializeTimer ( void )
{
int i;

  for ( i = 0; i <= MaxTimer; i++)
  {
    TimerHandleField[i] = 0;
  }
  timer_configured = FALSE;
  t_config = NULL;
}
#endif