view src/gpf/inc/drvconf.h @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/* 
+------------------------------------------------------------------------------
|  File:       drvconf.h
+------------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for the dynamic driver configuration.
+----------------------------------------------------------------------------- 
*/ 

#ifndef DRVCONF_H
#define DRVCONF_H

/*==== INCLUDES =============================================================*/
#include "typedefs.h"
#include "gdi.h"
#include "vsi.h"

/*==== CONSTS ===============================================================*/

#if defined _TARGET_
 #define MAX_AVAILABLE_DRV 1
#else
 #define MAX_AVAILABLE_DRV 6
#endif

#define TIF_NAME              "TIF"
#define TR_NAME               "TR"
#define EMI_NAME              "EMI"
#define SOCKET_NAME           "SOCKET"
#define MTST_NAME             "MTST"
#define SER_NAME              "SER"
#define THIF_LINK_NAME        "THIFLINK"
#define USERSPACE_LINK_NAME   "USSPLINK"
#define TITRC_NAME            "TITRC"
#define NODRV_NAME            "NODRV"

#define DRV_DEFAULT       "DEFAULT"
#define DRV_TI_MODE       "TI_MODE"
#define DRV_RAW_TI_MODE   "RAW_TI_MODE"
#define TIF_PCON_ENABLE   "ENABLE_PCON"
#define TR_STX_LF         "STX_LF"
#define ENABLE_SYNC_MODE  "ENA_SYNC_MODE"
#define DISABLE_SYNC_MODE "DIS_SYNC_MODE"

#define FILTER            "FILTER"

#define DRV_SIGTYPE_READ_L1   0x100
#define DRV_SIGTYPE_READ_RIV  0x200

/*==== TYPES ================================================================*/

typedef struct
{
  T_DRV_LIST_ENTRY entry;  
  USHORT drv_pos;
} T_TST_DRV_ENTRY;

/*==== EXPORTS ==============================================================*/

SHORT tst_drv_open (char *drv_name, T_TST_DRV_ENTRY **drv_info );


#endif /* DRVCONF_H */