FreeCalypso > hg > fc-tourmaline
view src/gpf/tst/drv/ser_tr.c @ 303:f76436d19a7a default tip
!GPRS config: fix long-standing AT+COPS chance hanging bug
There has been a long-standing bug in FreeCalypso going back years:
sometimes in the AT command bring-up sequence of an ACI-only MS,
the AT+COPS command would produce only a power scan followed by
cessation of protocol stack activity (only L1 ADC traces), instead
of the expected network search sequence. This behaviour was seen
in different FC firmware versions going back to Citrine, and seemed
to follow some law of chance, not reliably repeatable.
This bug has been tracked down and found to be specific to !GPRS
configuration, stemming from our TCS2/TCS3 hybrid and reconstruction
of !GPRS support that was bitrotten in TCS3.2/LoCosto version.
ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3
version and had to be pulled from TCS2 - but as it turns out,
there is a new field in the MMR_REG_REQ primitive that needs to be
set correctly, and that psa_mms.c module is the place where this
initialization needed to be added.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 08 Jun 2023 08:23:37 +0000 |
parents | 4e78acac3d88 |
children |
line wrap: on
line source
/* +------------------------------------------------------------------------------ | File: ser_tr.c +------------------------------------------------------------------------------ | Copyright 2004 Texas Instruments Deutschland, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Deutschland, AG. +----------------------------------------------------------------------------- | Purpose : This Modul contains the serial driver adaptation +----------------------------------------------------------------------------- */ #ifndef __SER_TR_C__ #define __SER_TR_C__ #endif #include "typedefs.h" #include "traceswitch.h" #include "serialswitch.h" #include "gdi.h" #include "tstheader.h" /*==== TYPES ======================================================*/ typedef struct { USHORT Handle; USHORT EnabledSignalType; T_DRV_CB_FUNC Callback; char Connected; } T_SER_TR_DATA; /*==== CONSTANTS ==================================================*/ #define ALLOWED_SER_TR_SIGNALS (DRV_SIGTYPE_READ|DRV_SIGTYPE_CONNECT) /*==== EXTERNALS ==================================================*/ #ifdef RUN_FLASH USHORT SER_TR_Write ( void *Buffer, ULONG *BytesToWrite ); #endif /*==== VARIABLES ==================================================*/ #ifndef RUN_INT_RAM T_SER_TR_DATA SER_TR_Data; #endif static T_DRV_SIGNAL Signal; /*==== FUNCTIONS ==================================================*/ #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : SER | | STATE : code ROUTINE : Callback | +--------------------------------------------------------------------+ PURPOSE : callback function of the driver */ void Callback ( void ) { if ( SER_TR_Data.EnabledSignalType & DRV_SIGTYPE_READ ) { Signal.SignalType = DRV_SIGTYPE_READ; Signal.DrvHandle = SER_TR_Data.Handle; (SER_TR_Data.Callback)( &Signal ); } } #endif #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : SER | | STATE : code ROUTINE : SER_TR_Exit | +--------------------------------------------------------------------+ PURPOSE : exit a driver */ void SER_TR_Exit ( void ) { } #endif #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : SER | | STATE : code ROUTINE : SER_TR_Read | +--------------------------------------------------------------------+ PURPOSE : read data from driver */ USHORT SER_TR_Read ( void *Buffer, ULONG *BytesToRead ) { *BytesToRead = (USHORT)SER_tr_ReadNChars ( SER_LAYER_1, Buffer, *BytesToRead ); return DRV_OK; } #endif #ifndef RUN_FLASH /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : SER | | STATE : code ROUTINE : SER_TR_Write | +--------------------------------------------------------------------+ PURPOSE : write data to driver */ USHORT SER_TR_Write ( void *Buffer, ULONG *BytesToWrite ) { ULONG ToWrite = *BytesToWrite & ~PRIM_FLAG_MASK; ULONG BytesWritten; char *ptr = (char*)Buffer; ptr--; *ptr = 0x13; ToWrite += 1; BytesWritten = (ULONG)SER_tr_WriteNBytes (SER_LAYER_1, (SYS_UWORD8*)ptr, (SYS_UWORD32)ToWrite); *BytesToWrite = BytesWritten; return ( DRV_OK ); } #endif #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : SER | | STATE : code ROUTINE : SER_TR_SetSignal | +--------------------------------------------------------------------+ PURPOSE : enable signal for the driver */ USHORT SER_TR_SetSignal ( USHORT SignalType ) { if ( !(SignalType & ALLOWED_SER_TR_SIGNALS) ) return DRV_INVALID_PARAMS; else SER_TR_Data.EnabledSignalType |= SignalType; return DRV_OK; } #endif #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : SER | | STATE : code ROUTINE : SER_TR_ResetSignal | +--------------------------------------------------------------------+ PURPOSE : disable signal for the driver */ USHORT SER_TR_ResetSignal ( USHORT SignalType ) { if ( !(SignalType & ALLOWED_SER_TR_SIGNALS) ) return DRV_INVALID_PARAMS; else SER_TR_Data.EnabledSignalType &= ~SignalType; return DRV_OK; } #endif #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : SER | | STATE : code ROUTINE : SER_TR_SetConfig | +--------------------------------------------------------------------+ PURPOSE : set configuration for the driver */ USHORT SER_TR_SetConfig ( char *Buffer ) { if ( !SER_TR_Data.Connected ) { Signal.SignalType = DRV_SIGTYPE_CONNECT; Signal.DrvHandle = SER_TR_Data.Handle; Signal.UserData = NULL; (SER_TR_Data.Callback)( &Signal ); SER_TR_Data.Connected = TRUE; return DRV_OK; } return DRV_OK; } #endif #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : SER | | STATE : code ROUTINE : SER_TR_Init | +--------------------------------------------------------------------+ PURPOSE : initialize driver */ USHORT SER_TR_Init ( USHORT DrvHandle, T_DRV_CB_FUNC CallbackFunc, T_DRV_EXPORT const **DrvInfo ) { static const T_DRV_EXPORT SER_TR_Info = { "SER", CALLED_FROM_ISR, { #ifdef _TOOLS_ SER_TR_TR_Init, #endif SER_TR_Exit, SER_TR_Read, SER_TR_Write, NULL, NULL, NULL, SER_TR_SetSignal, SER_TR_ResetSignal, SER_TR_SetConfig, NULL, NULL, } }; SER_TR_Data.Handle = DrvHandle; SER_TR_Data.EnabledSignalType = 0; SER_TR_Data.Callback = CallbackFunc; SER_TR_Data.Connected = FALSE; SER_tr_Init ( SER_LAYER_1, TR_BAUD_115200, Callback ); *DrvInfo = &SER_TR_Info; return DRV_OK; } #endif