view src/gpf/tst/drv/titrc.c @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/* 
+------------------------------------------------------------------------------
|  File:       titrc.c
+------------------------------------------------------------------------------
|  Copyright 2004 Texas Instruments Deutschland, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Deutschland, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This Module defines the functionality of the TITRC driver
|             to communicate with the TI trace task.
+----------------------------------------------------------------------------- 
*/ 


#ifndef __TITRC_C__
#define __TITRC_C__
#endif

#include "typedefs.h"
#include "string.h"
#include "tstheader.h"
#include "rvt_gen.h"
#include "gdi.h"
#include "serialswitch.h"

/*==== TYPES ======================================================*/

typedef struct
{
  USHORT Handle;
  USHORT EnabledSignalType;
  T_DRV_CB_FUNC Callback;
  T_RVT_USER_ID trc_id;
  unsigned char connected;
  T_RVT_BUFFER read_ptr;
  unsigned int read_len;
} T_TITRC_DATA;

/*==== CONSTANTS ==================================================*/

#define ALLOWED_TITRC_SIGNALS   (DRV_SIGTYPE_READ|DRV_SIGTYPE_CONNECT) 


/*==== EXTERNALS ==================================================*/

extern USHORT emergeny_trace;

/*==== VARIABLES ==================================================*/

#ifndef RUN_INT_RAM
T_TITRC_DATA TITRC_Data;
T_DRV_SIGNAL Signal;
#else
extern T_TITRC_DATA TITRC_Data;
#endif

#ifndef RUN_FLASH
char header_buffer[TST_BIG_HEADER_SIZE];
#endif

/*==== FUNCTIONS ==================================================*/

#ifndef RUN_INT_RAM
extern USHORT TITRC_Write ( void *Buffer, ULONG *BytesToWrite ) ;
#endif

#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-Frame (8415)           MODULE  : TITRC               |
| STATE   : code                       ROUTINE : TITRC_Read          |
+--------------------------------------------------------------------+

  PURPOSE : read data from driver

*/
USHORT TITRC_Read ( void *Buffer, ULONG *BytesToRead )
{

  if ( TITRC_Data.read_ptr )
  {
    if ( *BytesToRead != 0 )
    {
      if ( *BytesToRead > TITRC_Data.read_len )
        *BytesToRead = TITRC_Data.read_len;

      memcpy ( Buffer, TITRC_Data.read_ptr, *BytesToRead );

      if ( *BytesToRead < TITRC_Data.read_len )
      {
        TITRC_Data.read_ptr += *BytesToRead;
        TITRC_Data.read_len -= *BytesToRead;
      }
      else
        TITRC_Data.read_ptr = NULL;
    }
    else
    {
      *BytesToRead = TITRC_Data.read_len;
    }
  }
  else
  {
    *BytesToRead = 0;
  }

  return DRV_OK;
}
#endif

#ifndef RUN_FLASH
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-Frame (8415)           MODULE  : TITRC               |
| STATE   : code                       ROUTINE : TITRC_Write         |
+--------------------------------------------------------------------+

  PURPOSE : write data to driver

*/
USHORT TITRC_Write ( void *Buffer, ULONG *BytesToWrite )
{
T_RVT_FORMAT msg_format;
char *ptr = (char*)Buffer;
ULONG BytesWritten;
ULONG ToWrite;
T_RVT_BUFFER rvt_buffer;

  msg_format = RVT_BINARY_FORMAT;

  if ( emergeny_trace )
  {
    ptr--;
    *ptr = 0x13;
    ToWrite = (ULONG)*BytesToWrite;
    ToWrite += 1;
    BytesWritten = (ULONG)SER_tr_WriteNBytes (1, (SYS_UWORD8*)ptr, (SYS_UWORD32)ToWrite);
    *BytesToWrite = BytesWritten;
  }
  else
  {
    if ( *BytesToWrite & PRIM_HEADER_FLAG )
    {
      memcpy ( header_buffer, (char*)Buffer, TST_BIG_HEADER_SIZE );
      return DRV_OK;
    }
    if ( *BytesToWrite & PRIM_DATA_FLAG )
    {
      ToWrite = *BytesToWrite & ~PRIM_DATA_FLAG;
      if ( rvt_mem_alloc(TITRC_Data.trc_id, ToWrite+TST_BIG_HEADER_SIZE, &rvt_buffer) != RVT_OK )
        return DRV_BUFFER_FULL;
      if ( rvt_buffer != NULL )
      {
        memcpy ( (char*)rvt_buffer, header_buffer, TST_BIG_HEADER_SIZE );
        memcpy ( (char*)rvt_buffer+TST_BIG_HEADER_SIZE, (char*)Buffer, ToWrite );
        if ( rvt_send_trace_no_cpy ( rvt_buffer, TITRC_Data.trc_id, (T_RVT_MSG_LG)ToWrite+TST_BIG_HEADER_SIZE, msg_format ) != RVT_OK )
          return DRV_BUFFER_FULL;
        else
          return DRV_OK;
      }
    }
    if ( rvt_send_trace_cpy ( (T_RVT_BUFFER)Buffer, TITRC_Data.trc_id, (T_RVT_MSG_LG)*BytesToWrite, msg_format ) != RVT_OK )
      return DRV_BUFFER_FULL;
  }
  return DRV_OK;
}
#endif

#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-Frame (8415)           MODULE  : TITRC               |
| STATE   : code                       ROUTINE : TITRC_SetSignal     |
+--------------------------------------------------------------------+

  PURPOSE : enable signal for the driver

*/
USHORT TITRC_SetSignal ( USHORT SignalType )
{
	if ( !(SignalType & ALLOWED_TITRC_SIGNALS) )
    return DRV_INVALID_PARAMS;
  else
    TITRC_Data.EnabledSignalType |= SignalType;
  
  return DRV_OK;
}
#endif

#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-Frame (8415)           MODULE  : TITRC               |
| STATE   : code                       ROUTINE : TITRC_ResetSignal   |
+--------------------------------------------------------------------+

  PURPOSE : disable signal for the driver

*/
USHORT TITRC_ResetSignal ( USHORT SignalType )
{
	if ( !(SignalType & ALLOWED_TITRC_SIGNALS) )
    return DRV_INVALID_PARAMS;
  else
    TITRC_Data.EnabledSignalType &= ~SignalType;
  
  return DRV_OK;
}
#endif

#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-Frame (8415)           MODULE  : TITRC               |
| STATE   : code                       ROUTINE : TITRC_SetConfig     |
+--------------------------------------------------------------------+

  PURPOSE : set configuration for the driver

*/
USHORT TITRC_SetConfig ( char *Buffer )
{

  if ( TITRC_Data.connected == FALSE )
  {
    Signal.SignalType = DRV_SIGTYPE_CONNECT;
	  Signal.DrvHandle = TITRC_Data.Handle;
    (TITRC_Data.Callback)( &Signal );
    TITRC_Data.connected = TRUE;
  }
  return DRV_OK;
}
#endif

#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-Frame (8415)           MODULE  : TITRC               |
| STATE   : code                       ROUTINE : TITRC_Callback      |
+--------------------------------------------------------------------+

  PURPOSE : callback function of the driver

*/
int callback_busy = 0;
void TITRC_Callback ( T_RVT_BUFFER ptr, UINT16 len )
{
  if ( 	callback_busy == 1 )
    for (;;)
      ;

	callback_busy = 1;
  if ( TITRC_Data.EnabledSignalType & DRV_SIGTYPE_READ )
  {
    TITRC_Data.read_ptr = ptr;
    TITRC_Data.read_len = len;
    Signal.SignalType = DRV_SIGTYPE_READ;
	  Signal.DrvHandle = TITRC_Data.Handle;
    (TITRC_Data.Callback)( &Signal );
  }
	callback_busy = 0;
}
#endif

#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-Frame (8415)           MODULE  : TITRC               |
| STATE   : code                       ROUTINE : TITRC_Init          |
+--------------------------------------------------------------------+

  PURPOSE : initialize driver

*/
USHORT TITRC_Init ( USHORT DrvHandle, T_DRV_CB_FUNC CallbackFunc, T_DRV_EXPORT const **DrvInfo )
{                
static const T_DRV_EXPORT TITRC_Info =
{
  "TITRC",
  0,
  {
#ifdef _TOOLS_
    TITRC_Init,
#endif
    NULL,
    TITRC_Read,
    TITRC_Write,
    NULL,
    NULL,
    NULL,
    TITRC_SetSignal,
    TITRC_ResetSignal,
    TITRC_SetConfig,
    NULL,
    NULL,
  }
};

  TITRC_Data.connected = FALSE;
    
  TITRC_Data.Handle = DrvHandle;

  TITRC_Data.EnabledSignalType = 0;

  TITRC_Data.Callback = CallbackFunc;

  if ( rvt_register_id ( (char*)"L23",&TITRC_Data.trc_id, TITRC_Callback ) == RVT_INVALID_PARAMETER )
    return DRV_INITFAILURE;

  *DrvInfo = &TITRC_Info;

  return DRV_OK;           
}
#endif