view src/nucleus/smse.c @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/*************************************************************************/
/*                                                                       */
/*               Copyright Mentor Graphics Corporation 2002              */
/*                         All Rights Reserved.                          */
/*                                                                       */
/* THIS WORK CONTAINS TRADE SECRET AND PROPRIETARY INFORMATION WHICH IS  */
/* THE PROPERTY OF MENTOR GRAPHICS CORPORATION OR ITS LICENSORS AND IS   */
/* SUBJECT TO LICENSE TERMS.                                             */
/*                                                                       */
/*************************************************************************/

/*************************************************************************/
/*                                                                       */
/* FILE NAME                                               VERSION       */
/*                                                                       */
/*      smse.c                                         Nucleus PLUS 1.14 */
/*                                                                       */
/* COMPONENT                                                             */
/*                                                                       */
/*      SM - Semaphore Management                                        */
/*                                                                       */
/* DESCRIPTION                                                           */
/*                                                                       */
/*      This file contains the error checking routines for the           */
/*      supplemental functions of the Semaphore component.  This permits */
/*      easy removal of error checking logic when it is not needed.      */
/*                                                                       */
/* DATA STRUCTURES                                                       */
/*                                                                       */
/*      None                                                             */
/*                                                                       */
/* FUNCTIONS                                                             */
/*                                                                       */
/*      SMSE_Reset_Semaphore                Reset a semaphore            */
/*                                                                       */
/* DEPENDENCIES                                                          */
/*                                                                       */
/*      cs_extr.h                           Common Service functions     */
/*      tc_extr.h                           Thread Control functions     */
/*      sm_extr.h                           Semaphore functions          */
/*                                                                       */
/* HISTORY                                                               */
/*                                                                       */
/*         DATE                    REMARKS                               */
/*                                                                       */
/*      03-01-1994      Created initial version 1.1 from                 */
/*                      routines originally in core                      */
/*                      error checking file                              */
/*                                                                       */
/*      03-18-1994      Verified version 1.1                             */
/*      04-17-1996      updated to version 1.2                           */
/*      03-24-1998      Released version 1.3                             */
/*      04-17-2002      Released version 1.13m                           */
/*      11-07-2002      Released version 1.14                            */
/*************************************************************************/
#define         NU_SOURCE_FILE


#include        "cs_extr.h"                 /* Common service functions  */
#include        "tc_extr.h"                 /* Thread control functions  */
#include        "sm_extr.h"                 /* Semaphore functions       */



/*************************************************************************/
/*                                                                       */
/* FUNCTION                                                              */
/*                                                                       */
/*      SMSE_Reset_Semaphore                                             */
/*                                                                       */
/* DESCRIPTION                                                           */
/*                                                                       */
/*      This function performs error checking on the parameters supplied */
/*      to the reset semaphore function.                                 */
/*                                                                       */
/* CALLED BY                                                             */
/*                                                                       */
/*      Application                                                      */
/*                                                                       */
/* CALLS                                                                 */
/*                                                                       */
/*      SMS_Reset_Semaphore                 Actual reset semaphore func. */
/*                                                                       */
/* INPUTS                                                                */
/*                                                                       */
/*      semaphore_ptr                       Semaphore control block ptr  */
/*      initial_count                       Initial count to reset the   */
/*                                            semaphore to               */
/*                                                                       */
/* OUTPUTS                                                               */
/*                                                                       */
/*      NU_INVALID_SEMAPHORE                Invalid semaphore pointer    */
/*                                                                       */
/* HISTORY                                                               */
/*                                                                       */
/*        DATE                    REMARKS                                */
/*                                                                       */
/*      03-01-1993      Created initial version 1.0                      */
/*      04-19-1993      Verified version 1.0                             */
/*      03-01-1994      Modified function interface,                     */
/*                      resulting in version 1.1                         */
/*                                                                       */
/*      03-18-1994      Verified version 1.1                             */
/*                                                                       */
/*************************************************************************/
STATUS  SMSE_Reset_Semaphore(NU_SEMAPHORE *semaphore_ptr, 
                                                    UNSIGNED initial_count)
{

SM_SCB         *semaphore;                  /* Semaphore control blk ptr */
STATUS          status;                     /* Completion status         */


    /* Move input semaphore pointer into internal pointer.  */
    semaphore =  (SM_SCB *) semaphore_ptr;

    /* Determine if the semaphore pointer is valid.  */
    if ((semaphore) && (semaphore -> sm_id == SM_SEMAPHORE_ID))
    
        /* Semaphore pointer is valid, call function to reset it.  */
        status =  SMS_Reset_Semaphore(semaphore_ptr, initial_count);
        
    else
    
        /* Semaphore pointer is invalid, indicate in completion status.  */
        status =  NU_INVALID_SEMAPHORE;
        
    /* Return completion status.  */
    return(status);
}