view src/ui/mfw/mfw_cnvt.c @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents 92abb46dc1ba
children
line wrap: on
line source

/*
+--------------------------------------------------------------------+
| PROJECT: MMI-Framework (8417)         $Workfile:: mfw_cnvt.c      $|
| $Author:: Es  $ CONDAT GmbH           $Revision:: 1               $|
| CREATED: 03.08.00                     $Modtime:: 03.08.00 18:57   $|
| STATE  : code                                                      |
+--------------------------------------------------------------------+

   MODULE  : MFW_CNVT

   PURPOSE : string convertion

   EXPORT  :

   TO DO   :

   $History:: mfw_cnvt.c                                             $
*/

#define ENTITY_MFW

#include <string.h>
#include <stdio.h>
#include <stdlib.h>

#if defined (NEW_FRAME)

#include "typedefs.h"
#include "vsi.h"
#include "pei.h"
#include "custom.h"
#include "gsm.h"

#else

#include "STDDEFS.H"
#include "custom.h"
#include "gsm.h"
#include "vsi.h"

#endif

#include "mfw_mfw.h"
#include "mfw_phb.h"
#include "mfw_phbi.h"
#include "mfw_cm.h"
#include "mfw_cmi.h"
#include "mfw_nm.h"
#include "mfw_sim.h"
#include "mfw_sima.h"
#include "mfw_nmi.h"
#include "mfw_simi.h"
#include "mfw_win.h"

#include "mfw_tim.h"

#include "ksd.h"
#include "psa.h"

#if defined (FAX_AND_DATA)
#include "aci_fd.h"
#endif

#include "cmh.h"
#include "phb.h"
#include "cmh_phb.h"

#include "mfw_ss.h"
#include "mfw_ssi.h"

#define PASSED 0
#define FAILED 1
#define LEN_OFFSET 1

/* Added to remove warning Aug - 11 */
EXTERN char   ATB_char_GSM (char ascii_character);
/* End - remove warning Aug - 11 */
/*
+---------------------------------------------------------------+
| PROJECT: MMI-Framework (8417)         MODULE: MFW_CNVT        |
| STATE  : code                         ROUTINE: mfw_getStrMode |
+---------------------------------------------------------------+

   PURPOSE : This function is used to request the coding format
             of a given string. The return value is
             "MFW_DCS_7bits" or " MFW_DCS_UCS2".

*/

T_MFW_DCS mfw_getStrMode( UBYTE *str, // alpha string in MFW
                          UBYTE len)  // length of alpha string

{

  if( str[0] == 0x80)
    return MFW_DCS_UCS2;
  else
    return MFW_DCS_7bits;
}

/*
+---------------------------------------------------------------+
| PROJECT: MMI-Framework (8417)         MODULE: MFW_CNVT        |
| STATE  : code                         ROUTINE: mfw_SIM2GsmStr |
+---------------------------------------------------------------+

   PURPOSE : This function is used to convert the MFW alpha
             formatted string (consisting of alpha name and
             length of name in bytes) to a GSM default string
             (including zero-termination) and to additionally
             set the @ code to 0x80.

*/

T_MFW mfw_SIM2GsmStr( UBYTE inLen,
                      UBYTE *inMfwStr,
                      UBYTE maxOutSize,   /* in byte */
                      UBYTE *outGsmStr )

{
  int i;
  UBYTE len;

  if (!inLen OR !maxOutSize)
    return FAILED;        /* string is zero length */

  if (*inMfwStr EQ 0x80)  /* input UCS, output GSM default */
  {
    len = inLen / 2;      /* GSM string is half length of unicode string */
    for( i=0; i<MINIMUM(len,maxOutSize-1); i++ )
    {
      if (inMfwStr[(i*2)+2] == 0x00)
        * (outGsmStr + i) = 0x80;
      else
        * (outGsmStr + i) = inMfwStr[(i*2)+2]; /* copy every 2nd byte */
    }
    outGsmStr[i] = '\0';
    return PASSED;
  }
  else                   /* input GSM default, output GSM default */
  {
    for( i=0; i<MINIMUM(inLen,maxOutSize-1); i++ )
    {
      if (inMfwStr[i] EQ 0x00)
        * (outGsmStr + i) = 0x80;
      else
        * (outGsmStr + i) = inMfwStr[i];
    }
    outGsmStr[i] = '\0';
    return PASSED;
  }

}

/*
+---------------------------------------------------------------+
| PROJECT: MMI-Framework (8417)         MODULE: MFW_CNVT        |
| STATE  : code                         ROUTINE: mfw_SIM2UcsStr |
+---------------------------------------------------------------+

   PURPOSE : This function is used to convert the MFW alpha
             formatted string to a unicode string. The first
             two bytes of this unicode string indicates the
             number of characters in the string.

*/

T_MFW mfw_SIM2UcsStr( UBYTE   inLen,
                      UBYTE*  inMfwStr,
                      UBYTE   maxOutSize,    /* in short */
                      U16*    outUcsStr)

{
  int i;
  short cnt;

  if (!inLen OR !maxOutSize)
    return FAILED;

  if (inMfwStr[0] EQ 0x80)  /* input UCS, output UCS */
  {
  TRACE_FUNCTION("First byte is indeed 0x80");
    //inMfwStr++;
    inLen--;

    // NOTE: do not add '\0' termination!
    // len should not include termination
    cnt = 1;
    for( i=0; i<MINIMUM(inLen/2,maxOutSize-1); i++ )
    {
      outUcsStr[ i + LEN_OFFSET] = ((U16)inMfwStr[cnt] << 8)&0xFF00 + ((U16)inMfwStr[cnt + 1])&0xFF;
      cnt += 2;
    }
    outUcsStr[0] = i;
    return PASSED;
  }
  else                    /* input GSM default, output UCS */
  {
    for( i=0; i<MINIMUM(inLen,maxOutSize-1); i++ )
      * (outUcsStr + i + LEN_OFFSET) = (U16) inMfwStr[i];

    outUcsStr[0] = i;     /* length of unicode string */
    return PASSED;
  }
}

/*
+---------------------------------------------------------------+
| PROJECT: MMI-Framework (8417)         MODULE: MFW_CNVT        |
| STATE  : code                         ROUTINE: mfw_Gsm2SIMStr |
+---------------------------------------------------------------+

   PURPOSE : This function is used to convert a zero-terminated
             GSM default string ( @ code is 0x80) to a MFW
             alpha formatted string (consisting of alpha name
             and length of name in bytes and @ code is 0x00).
             The MFW alpha format is dependent on the parameter "outMode"
             "outMode" is set to either " MFW_DCS_7bits" or " MFW_DCS_UCS2"

GW-SPR#762- Increased array size - required for larger phonebook entries (>40 chars).
*/

#define MAX_CONVERT_LEN 255
T_MFW mfw_Gsm2SIMStr( T_MFW_DCS outMode,
                      UBYTE *inGsmStr,
                      UBYTE maxOutSize,
                      UBYTE *outMfwStr,
                      UBYTE *outLen )
{

  UBYTE temp_str[MAX_CONVERT_LEN];
  int i;
  UBYTE len = (UBYTE) strlen( (char *)inGsmStr );
  char GSM_char;/*SPR2175*/

  len=MINIMUM(len,sizeof(temp_str));
  memcpy( temp_str,inGsmStr,len );

  if( outMode EQ MFW_DCS_7bits )
  {
    /* write to outMfwStr */
    for( i=0; i<MINIMUM(len,maxOutSize); i++ )
    {	/*SPR2175, convert to GSM encoding*/
       GSM_char= ATB_char_GSM( temp_str[i] );
       temp_str[i]= GSM_char;
      * (outMfwStr + i) = temp_str[i];
    }
    /* write length of name to outLen */
    *outLen = len;
    return PASSED;
  }
  else if( outMode EQ MFW_DCS_UCS2 )
  {
    /* write to outMfwStr */
    outMfwStr[0] = 0x80;
    for( i=0; i<MINIMUM(len,maxOutSize-1); i++ )
    {
      if( temp_str[i] EQ 0x80 ) /* check for occurance of @ */
        temp_str[i] = 0x00;
      * (outMfwStr + (i*2) + 1) = 0x00;
      * (outMfwStr + (i*2) + 2) = temp_str[i];
    }
    /* write length of name to outLen */
    *outLen = len*2 + 1;
    return PASSED;
  }
  else
  {
    TRACE_EVENT ("mfw_Gsm2SIMStr() - outMode is not valid");
    return FAILED;
  }

//  return PASSED;  // RAVI
}

/*
+---------------------------------------------------------------+
| PROJECT: MMI-Framework (8417)         MODULE: MFW_CNVT        |
| STATE  : code                         ROUTINE: mfw_Ucs2SIMStr |
+---------------------------------------------------------------+

   PURPOSE : This function is used to convert a unicode string
             to MFW alpha format. The MFW alpha format is
             dependent on the parameter "outMode". "outMode"
             is " MFW_DCS_7bits" or " MFW_DCS_UCS2".

*/

T_MFW mfw_Ucs2SIMStr( T_MFW_DCS outMode,
                      U16 *inDcsStr,
                      UBYTE maxOutSize,
                      UBYTE *outMfwStr,
                      UBYTE *outLen )
{
  int i;
  U16 len;

  len = inDcsStr[0];

  if( outMode EQ MFW_DCS_7bits )
  {
    /* write to outMfwStr */
    for( i=0; i<MINIMUM(len,maxOutSize); i++ )
    {
      * (outMfwStr + (i*2) + 1) = (UBYTE) (inDcsStr[i+1] & 0xff);
      * (outMfwStr + (i*2)) = (UBYTE) ((inDcsStr[i+1] & 0xff00) >> 8);
    }
    /* write length of name to outLen */
    *outLen = len * 2;

    return PASSED;
  }
  else if( outMode EQ MFW_DCS_UCS2 )
  {
    /* write to outMfwStr */
    outMfwStr[0] = 0x80;
    for( i=0; i<len; i++)
    {/*MC, SPR 1752, bytes are no longer swapped*/
      * (outMfwStr + (i*2) + 1) = (UBYTE) (inDcsStr[i+1] & 0xff);
      * (outMfwStr + (i*2) + 2) = (UBYTE) ((inDcsStr[i+1] & 0xff00) >> 8);
    }
    /* write length to outLen */
    *outLen = (len*2) + 1;

    return PASSED;

  }
  else	/* string does not require conversion to unicode */
  {
    TRACE_EVENT ("mfw_Ucs2SIMStr() - outMode is not valid");
    return FAILED;
  }

//  return PASSED;  // RAVI
}

/*CONQUEST 5992(related) MC added function to convert GSM string to ASCII*/
static const unsigned char gsm_2_ascii_table[128] = { 64, 156, 36, 157, 138, 130, 151, 141, 149, 128,
													 10,   2 ,  7,  32, 143, 134,   4,  95, 232, 226, 239, 234, 227,   5, 228,
											 		233, 240,  32, 146, 145, 225, 144,  32,  33,  34,  35,   1,  37,  38,  39,
											 		 40,  41,  42,  43,  44, 45,  46,  47,  48,  49,  50,  51,  52,  53,  54,
											 		 55,  56,  57,  58,  59,  60,  61,  62,  63, 173,  65,  66,  67,  68,  69,
											 		 70,  71,  72,  73,  74,  75,  76,  77,  78,  79,  80,  81,  82,  83,  84,
											 		 85,  86,  87,  88,  89,  90, 142, 153, 165, 154,  06, 168,  97,  98,  99,
											 		100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, 114,
											 		115, 116, 117, 118, 119, 120, 121, 122, 132, 148, 164, 129, 133};
/* PATCH JPS 29.09 END */

/*
+---------------------------------------------------------------------------+
| PROJECT : MMI-Framework (8417)         MODULE  : MFW_SMS                  |
| STATE   : code                         ROUTINE :   mfw_GSM_2_ASCII      |
+---------------------------------------------------------------------------+

  PURPOSE : copy the index and status of a short message

*/
void mfw_GSM_2_ASCII(UBYTE* gsm_string, UBYTE* ascii_string, SHORT length)
{	int i;

	for(i=0;i<length;i++)
	{
		ascii_string[i] = gsm_2_ascii_table[gsm_string[i]];
	}
}