FreeCalypso > hg > fc-usbser-tools

annotate doc/DUART28-EEPROM-manual @ 67:742c41f44658

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
doc/FTDI-chip-ID: new article
author Mychaela Falconia <falcon@freecalypso.org>
date Wed, 13 Sep 2023 00:43:14 +0000
parents dbaf239436cf
children
Ignore whitespace changes - Everywhere: Within whitespace: At end of lines:
rev   line source
43
dbaf239436cf doc/DUART28-EEPROM-config: update for fc-duart28-conf
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
1 The new user-friendly (or fool-proof) way to examine and change DUART28 adapter
dbaf239436cf doc/DUART28-EEPROM-config: update for fc-duart28-conf
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
2 configuration is fc-duart28-conf utility described in the DUART28-EEPROM-config
dbaf239436cf doc/DUART28-EEPROM-config: update for fc-duart28-conf
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
3 article. The present article describes the older method that existed before
dbaf239436cf doc/DUART28-EEPROM-config: update for fc-duart28-conf
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
4 fc-duart28-conf, and which is used for initial factory programming.
34
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
5
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
6 Determining your current DUART28 config
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
7 =======================================
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
8
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
9 Connect the USB cable between your DUART28 board and your Linux host, and
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
10 observe dmesg output. If your DUART28 board is in the C configuration, it will
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
11 present as USB ID 0403:7152, and if it is in the S config, it will present as
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
12 USB ID 0403:6010. You can also see these USB IDs with lsusb. The product ID
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
13 string is also programmed as "DUART28C" or "DUART28S".
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
14
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
15 Converting from DUART28S to DUART28C
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
16 ====================================
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
17
43
dbaf239436cf doc/DUART28-EEPROM-config: update for fc-duart28-conf
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
18 If your DUART28 board is currently in the S config (or if you messed it up and
dbaf239436cf doc/DUART28-EEPROM-config: update for fc-duart28-conf
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
19 have a blank or corrupt EEPROM), its USB ID will be 0403:6010, which is the
dbaf239436cf doc/DUART28-EEPROM-config: update for fc-duart28-conf
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
20 default ID for FTDI's two-channel FT2232x family. Because it is the standard
dbaf239436cf doc/DUART28-EEPROM-config: update for fc-duart28-conf
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
21 default, there are plenty of other gadgets using the same ID - thus you need to
dbaf239436cf doc/DUART28-EEPROM-config: update for fc-duart28-conf
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
22 ensure that you have no other USB devices with the same ID connected to your
dbaf239436cf doc/DUART28-EEPROM-config: update for fc-duart28-conf
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
23 system during the reprogramming operation. Run lsusb and ensure that you see
dbaf239436cf doc/DUART28-EEPROM-config: update for fc-duart28-conf
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
24 only one USB device with ID 0403:6010. Ensure that this one device really is
dbaf239436cf doc/DUART28-EEPROM-config: update for fc-duart28-conf
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
25 your DUART28 board: unplug that USB cable and make sure that the device
dbaf239436cf doc/DUART28-EEPROM-config: update for fc-duart28-conf
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
26 disappears, plug it back in and make sure that it reappears.
34
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
27
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
28 One you have confirmed that you won't inadvertently hit some other FT2232x
43
dbaf239436cf doc/DUART28-EEPROM-config: update for fc-duart28-conf
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
29 device, execute the actual programming command, which is a shell pipeline:
34
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
30
43
dbaf239436cf doc/DUART28-EEPROM-config: update for fc-duart28-conf
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
31 ftee-gen2232c duart28c $Serial | fteeprom-prog i:0x0403:0x6010
34
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
32
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
33 (See FTDI-EEPROM-tools article for other ways to specify the target device to
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
34 fteeprom-prog.)
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
35
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
36 Replace the $Serial metavariable with the 3-digit serial number of your DUART28
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
37 adapter board as it appears on the factory serial number sticker.
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
38
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
39 After this operation completes successfully, unplug and replug the USB cable
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
40 between the DUART28 board and your host - the adapter should now show up with
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
41 USB ID 0403:7152.
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
42
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
43 Converting from DUART28C to DUART28S
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
44 ====================================
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
45
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
46 If your DUART28 board is currently in the C config, its USB ID will be
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
47 0403:7152, which is a private ID that belongs to us and should not be used by
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
48 other parties. The reverse conversion command is as follows:
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
49
43
dbaf239436cf doc/DUART28-EEPROM-config: update for fc-duart28-conf
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
50 ftee-gen2232c duart28s $Serial | fteeprom-prog i:0x0403:0x7152