# This udev rules file, copied to /etc/udev/rules.d , works on
# Mother Mychaela's Slackware 14.2 system.  I am absolutely NOT
# a udev expert, I don't claim to understand it, but the present
# concoction is modeled after OpenOCD's udev rules file.

ACTION!="add|change", GOTO="freecalypso_rules_end"
SUBSYSTEM!="usb|tty", GOTO="freecalypso_rules_end"

# FTDI default IDs

# FT232x (single-channel) default
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", MODE="660", GROUP="plugdev"

# FT2232x default
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6010", MODE="660", GROUP="plugdev"

# FT4232H default
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6011", MODE="660", GROUP="plugdev"

# FT232H default
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6014", MODE="660", GROUP="plugdev"

# ID codes allocated by FTDI to Falconia Partners LLC,
# used extensively in FreeCalypso queendom

# These two codes are used for FT2232x MPSSE+UART configs (JTAG quirk)
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="7150", MODE="660", GROUP="plugdev"
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="7151", MODE="660", GROUP="plugdev"

# FreeCalypso dual UART with boot control
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="7152", MODE="660", GROUP="plugdev"

# MCU host emulation and other configs where no ttyUSB devices
# should be created at all, userspace access only
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="7157", MODE="660", GROUP="plugdev"

# CP2102 devices

# CP2102 default ID
ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="ea60", MODE="660", GROUP="plugdev"

# Foxconn T-Com TC300
ATTRS{idVendor}=="0489", ATTRS{idProduct}=="e000", MODE="660", GROUP="plugdev"

# Foxconn Pirelli DP-L10
ATTRS{idVendor}=="0489", ATTRS{idProduct}=="e003", MODE="660", GROUP="plugdev"

LABEL="freecalypso_rules_end"