comparison src/nucleus/tms.c @ 0:92470e5d0b9e

src: partial import from FC Selenite
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 15 May 2020 01:28:16 +0000
parents
children
comparison
equal deleted inserted replaced
-1:000000000000 0:92470e5d0b9e
1 /*************************************************************************/
2 /* */
3 /* Copyright Mentor Graphics Corporation 2002 */
4 /* All Rights Reserved. */
5 /* */
6 /* THIS WORK CONTAINS TRADE SECRET AND PROPRIETARY INFORMATION WHICH IS */
7 /* THE PROPERTY OF MENTOR GRAPHICS CORPORATION OR ITS LICENSORS AND IS */
8 /* SUBJECT TO LICENSE TERMS. */
9 /* */
10 /*************************************************************************/
11
12 /*************************************************************************/
13 /* */
14 /* FILE NAME VERSION */
15 /* */
16 /* tms.c Nucleus PLUS 1.14 */
17 /* */
18 /* COMPONENT */
19 /* */
20 /* TM - Timer Management */
21 /* */
22 /* DESCRIPTION */
23 /* */
24 /* This file contains supplemental routines for the timer */
25 /* management component. */
26 /* */
27 /* DATA STRUCTURES */
28 /* */
29 /* None */
30 /* */
31 /* FUNCTIONS */
32 /* */
33 /* TMS_Create_Timer Create an application timer */
34 /* TMS_Delete_Timer Delete an application timer */
35 /* TMS_Reset_Timer Reset application timer */
36 /* TMS_Control_Timer Enable/Disable application */
37 /* timer */
38 /* */
39 /* DEPENDENCIES */
40 /* */
41 /* cs_extr.h Common Service functions */
42 /* tc_extr.h Thread Control functions */
43 /* tm_extr.h Timer functions */
44 /* hi_extr.h History functions */
45 /* */
46 /* HISTORY */
47 /* */
48 /* DATE REMARKS */
49 /* */
50 /* 03-01-1994 Created initial version 1.1 from */
51 /* previous version of TMC.C */
52 /* */
53 /* 03-18-1994 Verified version 1.1 */
54 /* 04-17-1996 updated to version 1.2 */
55 /* 03-24-1998 Released version 1.3. */
56 /* 03-26-1999 Released 1.11m (new release */
57 /* numbering scheme) */
58 /* 04-17-2002 Released version 1.13m */
59 /* 11-07-2002 Released version 1.14 */
60 /*************************************************************************/
61 #define NU_SOURCE_FILE
62
63
64 #include "cs_extr.h" /* Common service functions */
65 #include "tc_extr.h" /* Thread control functions */
66 #include "tm_extr.h" /* Timer functions */
67 #include "hi_extr.h" /* History functions */
68 #include "profiler.h" /* ProView interface */
69
70
71 /* Define external inner-component global data references. */
72
73 extern CS_NODE *TMD_Created_Timers_List;
74 extern UNSIGNED TMD_Total_Timers;
75 extern TM_TCB *TMD_Active_Timers_List;
76 extern INT TMD_Active_List_Busy;
77 extern TC_PROTECT TMD_Created_List_Protect;
78
79
80 /* Define internal function prototypes. */
81
82 VOID TMC_Start_Timer(TM_TCB *timer, UNSIGNED time);
83 VOID TMC_Stop_Timer(TM_TCB *timer);
84
85
86
87 /*************************************************************************/
88 /* */
89 /* FUNCTION */
90 /* */
91 /* TMS_Create_Timer */
92 /* */
93 /* DESCRIPTION */
94 /* */
95 /* This function creates an application timer and places it on the */
96 /* list of created timers. The timer is activated if designated by */
97 /* the enable parameter. */
98 /* */
99 /* CALLED BY */
100 /* */
101 /* Application */
102 /* TMSE_Create_Timer Error checking shell */
103 /* */
104 /* CALLS */
105 /* */
106 /* CSC_Place_On_List Add node to linked-list */
107 /* [HIC_Make_History_Entry] Make entry in history log */
108 /* [TCT_Check_Stack] Stack checking function */
109 /* TCT_Protect Data structure protect */
110 /* TCT_Unprotect Un-protect data structure */
111 /* TMS_Control_Timer Enable the new timer */
112 /* */
113 /* INPUTS */
114 /* */
115 /* timer_ptr Timer control block pointer */
116 /* name Timer name */
117 /* expiration_routine Timer expiration routine */
118 /* id Timer expiration ID */
119 /* initial_time Initial expiration time */
120 /* reschedule_time Reschedule expiration time */
121 /* enable Automatic enable option */
122 /* */
123 /* OUTPUTS */
124 /* */
125 /* NU_SUCCESS */
126 /* */
127 /* HISTORY */
128 /* */
129 /* DATE REMARKS */
130 /* */
131 /* 03-01-1993 Created initial version 1.0 */
132 /* 04-19-1993 Verified version 1.0 */
133 /* 03-01-1994 Changed function prototype, */
134 /* resulting in version 1.1 */
135 /* */
136 /* 03-18-1994 Verified version 1.1 */
137 /* */
138 /*************************************************************************/
139 STATUS TMS_Create_Timer(NU_TIMER *timer_ptr, CHAR *name,
140 VOID (*expiration_routine)(UNSIGNED), UNSIGNED id,
141 UNSIGNED initial_time, UNSIGNED reschedule_time, OPTION enable)
142 {
143
144 R1 TM_APP_TCB *timer; /* Timer control block ptr */
145 INT i; /* Working index variable */
146 NU_SUPERV_USER_VARIABLES
147
148 /* Switch to supervisor mode */
149 NU_SUPERVISOR_MODE();
150
151 /* Move input timer pointer into internal pointer. */
152 timer = (TM_APP_TCB *) timer_ptr;
153
154
155 #ifdef NU_ENABLE_STACK_CHECK
156
157 /* Call stack checking function to check for an overflow condition. */
158 TCT_Check_Stack();
159
160 #endif
161
162 #ifdef NU_ENABLE_HISTORY
163
164 /* Make an entry that corresponds to this function in the system history
165 log. */
166 HIC_Make_History_Entry(NU_CREATE_TIMER_ID, (UNSIGNED) timer,
167 (UNSIGNED) name, (UNSIGNED) expiration_routine);
168
169 #endif
170
171 /* First, clear the timer ID just in case it is an old Timer
172 Control Block. */
173 timer -> tm_id = 0;
174
175 /* Fill in the timer name. */
176 for (i = 0; i < NU_MAX_NAME; i++)
177 timer -> tm_name[i] = name[i];
178
179 /* Load the timer with the appropriate values. */
180 timer -> tm_expiration_routine = expiration_routine;
181 timer -> tm_expiration_id = id;
182 timer -> tm_expirations = 0;
183 timer -> tm_initial_time = initial_time;
184 timer -> tm_reschedule_time = reschedule_time;
185 timer -> tm_actual_timer.tm_timer_type = TM_APPL_TIMER;
186 timer -> tm_enabled = NU_FALSE;
187
188 /* Initialize link pointers. */
189 timer -> tm_created.cs_previous = NU_NULL;
190 timer -> tm_created.cs_next = NU_NULL;
191 timer -> tm_actual_timer.tm_next_timer = NU_NULL;
192 timer -> tm_actual_timer.tm_previous_timer= NU_NULL;
193 timer -> tm_actual_timer.tm_information = (VOID *) timer;
194
195 /* Protect against access to the list of created timers. */
196 TCT_Protect(&TMD_Created_List_Protect);
197
198 /* At this point the timer is completely built. The ID can now be
199 set and it can be linked into the created timer list. */
200 timer -> tm_id = TM_TIMER_ID;
201
202 /* Link the timer into the list of created timers and increment the
203 total number of timers in the system. */
204 CSC_Place_On_List(&TMD_Created_Timers_List, &(timer -> tm_created));
205 TMD_Total_Timers++;
206
207 #ifdef INCLUDE_PROVIEW
208 _RTProf_DumpTimer(RT_PROF_CREATE_TIMER,timer,RT_PROF_OK);
209 #endif
210
211 /* Release protection against access to the list of created timers. */
212 TCT_Unprotect();
213
214 /* Determine if the timer should be enabled. */
215 if (enable == NU_ENABLE_TIMER)
216
217 /* Activate the timer. */
218 TMS_Control_Timer(timer_ptr, NU_ENABLE_TIMER);
219
220 /* Return to user mode */
221 NU_USER_MODE();
222
223 /* Return successful completion. */
224 return(NU_SUCCESS);
225 }
226
227
228 /*************************************************************************/
229 /* */
230 /* FUNCTION */
231 /* */
232 /* TMS_Delete_Timer */
233 /* */
234 /* DESCRIPTION */
235 /* */
236 /* This function deletes an application timer and removes it from */
237 /* the list of created timers. */
238 /* */
239 /* CALLED BY */
240 /* */
241 /* Application */
242 /* TMSE_Delete_Timer Error checking shell */
243 /* */
244 /* CALLS */
245 /* */
246 /* CSC_Remove_From_List Remove node from list */
247 /* [HIC_Make_History_Entry] Make entry in history log */
248 /* [TCT_Check_Stack] Stack checking function */
249 /* TCT_Protect Protect created list */
250 /* TCT_System_Protect Protect active list */
251 /* TCT_Unprotect Release protection */
252 /* */
253 /* INPUTS */
254 /* */
255 /* timer_ptr Timer control block pointer */
256 /* */
257 /* OUTPUTS */
258 /* */
259 /* NU_NOT_DISABLED Timer not disabled first */
260 /* NU_SUCCESS */
261 /* */
262 /* HISTORY */
263 /* */
264 /* DATE REMARKS */
265 /* */
266 /* 03-01-1993 Created initial version 1.0 */
267 /* 04-19-1993 Verified version 1.0 */
268 /* 03-01-1994 Modified protection logic to use */
269 /* system protection, changed */
270 /* function prototype, resulting */
271 /* in version 1.1 */
272 /* */
273 /* 03-18-1994 Verified version 1.1 */
274 /* */
275 /*************************************************************************/
276 STATUS TMS_Delete_Timer(NU_TIMER *timer_ptr)
277 {
278
279 TM_APP_TCB *timer; /* Timer control block ptr */
280 STATUS status; /* Completion status */
281 NU_SUPERV_USER_VARIABLES
282
283 /* Switch to supervisor mode */
284 NU_SUPERVISOR_MODE();
285
286 /* Move input timer pointer into internal pointer. */
287 timer = (TM_APP_TCB *) timer_ptr;
288
289
290 #ifdef NU_ENABLE_STACK_CHECK
291
292 /* Call stack checking function to check for an overflow condition. */
293 TCT_Check_Stack();
294
295 #endif
296
297 #ifdef NU_ENABLE_HISTORY
298
299 /* Make an entry that corresponds to this function in the system history
300 log. */
301 HIC_Make_History_Entry(NU_DELETE_TIMER_ID, (UNSIGNED) timer,
302 (UNSIGNED) 0, (UNSIGNED) 0);
303
304 #endif
305
306 /* Initialize the status. */
307 status = NU_SUCCESS;
308
309 /* Use system protect to protect the active timer list temporarily. */
310 TCT_System_Protect();
311
312 /* Determine if the timer is currently disabled. */
313 if (timer -> tm_enabled)
314 {
315 /* Error, indicate to the caller that the timer is currently active. */
316 status = NU_NOT_DISABLED;
317
318 #ifdef INCLUDE_PROVIEW
319 _RTProf_DumpTimer(RT_PROF_DELETE_TIMER,timer,RT_PROF_FAIL);
320 #endif
321
322 }
323 else
324 {
325 /* Clear the timer ID. */
326 timer -> tm_id = 0;
327
328 #ifdef INCLUDE_PROVIEW
329 _RTProf_DumpTimer(RT_PROF_DELETE_TIMER,timer,RT_PROF_OK);
330 #endif /* INCLUDE_PROVIEW */
331
332 }
333
334 /* Release protection. */
335 TCT_Unprotect();
336
337 /* Determine if an error was detected. */
338 if (status == NU_SUCCESS)
339 {
340
341 /* Protect against access to the list of created timers. */
342 TCT_Protect(&TMD_Created_List_Protect);
343
344 /* Remove the timer from the list of created timers. */
345 CSC_Remove_From_List(&TMD_Created_Timers_List, &(timer -> tm_created));
346
347 /* Decrement the total number of created timers. */
348 TMD_Total_Timers--;
349
350 /* Release protection against access to the list of created timers. */
351 TCT_Unprotect();
352 }
353
354 /* Return to user mode */
355 NU_USER_MODE();
356
357 /* Return completion status. */
358 return(status);
359 }
360
361
362 /*************************************************************************/
363 /* */
364 /* FUNCTION */
365 /* */
366 /* TMS_Reset_Timer */
367 /* */
368 /* DESCRIPTION */
369 /* */
370 /* This function resets the specified application timer. Note that */
371 /* the timer must be in a disabled state prior to this call. The */
372 /* timer is activated after it is reset if the enable parameter */
373 /* specifies automatic activation. */
374 /* */
375 /* CALLED BY */
376 /* */
377 /* Application */
378 /* TMSE_Reset_Timer Error checking shell */
379 /* */
380 /* CALLS */
381 /* */
382 /* [HIC_Make_History_Entry] Make entry in history log */
383 /* [TCT_Check_Stack] Stack checking function */
384 /* TCT_System_Protect Protect active list */
385 /* TCT_Unprotect Release protection */
386 /* TMS_Control_Timer Enable/disable timer */
387 /* */
388 /* INPUTS */
389 /* */
390 /* timer_ptr Timer control block pointer */
391 /* expiration_routine Timer expiration routine */
392 /* initial_time Initial expiration time */
393 /* reschedule_time Reschedule expiration time */
394 /* enable Automatic enable option */
395 /* */
396 /* OUTPUTS */
397 /* */
398 /* NU_NOT_DISABLED Timer not disabled first */
399 /* NU_SUCCESS Successful completion */
400 /* */
401 /* HISTORY */
402 /* */
403 /* DATE REMARKS */
404 /* */
405 /* 03-01-1993 Created initial version 1.0 */
406 /* 04-19-1993 Verified version 1.0 */
407 /* 03-01-1994 Modified protection logic to use */
408 /* system protection, changed */
409 /* function prototype, resulting */
410 /* in version 1.1 */
411 /* */
412 /* 03-18-1994 Verified version 1.1 */
413 /* */
414 /*************************************************************************/
415 STATUS TMS_Reset_Timer(NU_TIMER *timer_ptr,
416 VOID (*expiration_routine)(UNSIGNED),
417 UNSIGNED initial_time, UNSIGNED reschedule_time, OPTION enable)
418 {
419
420 R1 TM_APP_TCB *timer; /* Timer control block ptr */
421 STATUS status; /* Completion status */
422 NU_SUPERV_USER_VARIABLES
423
424 /* Switch to supervisor mode */
425 NU_SUPERVISOR_MODE();
426
427 /* Move input timer pointer into internal pointer. */
428 timer = (TM_APP_TCB *) timer_ptr;
429
430
431 #ifdef NU_ENABLE_STACK_CHECK
432
433 /* Call stack checking function to check for an overflow condition. */
434 TCT_Check_Stack();
435
436 #endif
437
438 #ifdef NU_ENABLE_HISTORY
439
440 /* Make an entry that corresponds to this function in the system history
441 log. */
442 HIC_Make_History_Entry(NU_RESET_TIMER_ID, (UNSIGNED) timer,
443 (UNSIGNED) expiration_routine, (UNSIGNED) initial_time);
444
445 #endif
446
447 /* Protect against access to the active timer list. */
448 TCT_System_Protect();
449
450 /* Determine if this timer is active. An active timer cannot be
451 reset. */
452 if (timer -> tm_enabled)
453 {
454
455 /* Indicate that the timer is active by returning the proper status. */
456 status = NU_NOT_DISABLED;
457
458 #ifdef INCLUDE_PROVIEW
459 _RTProf_DumpTimer(RT_PROF_RESET_TIMER,timer,RT_PROF_FAIL);
460 #endif /* INCLUDE_PROVIEW */
461
462 }
463 else
464 {
465
466 /* Load the timer with the appropriate values. */
467 timer -> tm_expiration_routine = expiration_routine;
468 timer -> tm_expirations = 0;
469 timer -> tm_initial_time = initial_time;
470 timer -> tm_reschedule_time = reschedule_time;
471
472 /* Indicate successful completion status. */
473 status = NU_SUCCESS;
474 #ifdef INCLUDE_PROVIEW
475 _RTProf_DumpTimer(RT_PROF_RESET_TIMER,timer,RT_PROF_OK);
476 #endif /* INCLUDE_PROVIEW */
477
478 }
479
480 /* Release protection. */
481 TCT_Unprotect();
482
483 /* Determine if the timer needs to be enabled. */
484 if ((status == NU_SUCCESS) && (enable == NU_ENABLE_TIMER))
485
486 /* Activate the timer. */
487 TMS_Control_Timer(timer_ptr, NU_ENABLE_TIMER);
488
489 /* Return to user mode */
490 NU_USER_MODE();
491
492 /* Return completion status. */
493 return(status);
494 }
495
496
497 /*************************************************************************/
498 /* */
499 /* FUNCTION */
500 /* */
501 /* TMS_Control_Timer */
502 /* */
503 /* DESCRIPTION */
504 /* */
505 /* This function either enables or disables the specified timer. */
506 /* If the timer is already in the desired state, simply leave it */
507 /* alone. */
508 /* */
509 /* CALLED BY */
510 /* */
511 /* Application */
512 /* TMSE_Control_Timer Error checking shell */
513 /* */
514 /* CALLS */
515 /* */
516 /* [HIC_Make_History_Entry] Make entry in history log */
517 /* [TCT_Check_Stack] Stack checking function */
518 /* TCT_System_Protect Protect the active list */
519 /* TCT_Unprotect Release protection */
520 /* TMC_Start_Timer Start a timer */
521 /* TMC_Stop_Timer Stop a timer */
522 /* */
523 /* INPUTS */
524 /* */
525 /* app_timer Timer control block pointer */
526 /* enable Disable/enable timer option */
527 /* */
528 /* OUTPUTS */
529 /* */
530 /* NU_SUCCESS If service is successful */
531 /* */
532 /* HISTORY */
533 /* */
534 /* DATE REMARKS */
535 /* */
536 /* 03-01-1993 Created initial version 1.0 */
537 /* 04-19-1993 Verified version 1.0 */
538 /* 03-01-1994 Modified protection logic to use */
539 /* system protection, changed */
540 /* function prototype, resulting */
541 /* in version 1.1 */
542 /* */
543 /* 03-18-1994 Verified version 1.1 */
544 /* */
545 /*************************************************************************/
546 STATUS TMS_Control_Timer(NU_TIMER *app_timer, OPTION enable)
547 {
548
549 R1 TM_APP_TCB *timer; /* Timer control block ptr */
550 TM_TCB *timer_ptr; /* Actual timer pointer */
551 UNSIGNED time; /* Variable to hold request */
552 NU_SUPERV_USER_VARIABLES
553
554 /* Switch to supervisor mode */
555 NU_SUPERVISOR_MODE();
556
557 /* Move input timer pointer into internal pointer. */
558 timer = (TM_APP_TCB *) app_timer;
559
560
561 #ifdef NU_ENABLE_STACK_CHECK
562
563 /* Call stack checking function to check for an overflow condition. */
564 TCT_Check_Stack();
565
566 #endif
567
568 #ifdef NU_ENABLE_HISTORY
569
570 /* Make an entry that corresponds to this function in the system history
571 log. */
572 HIC_Make_History_Entry(NU_CONTROL_TIMER_ID, (UNSIGNED) timer,
573 (UNSIGNED) enable, (UNSIGNED) 0);
574
575 #endif
576
577 /* Protect against simultaneous access to the active timer list. */
578 TCT_System_Protect();
579
580 /* Setup pointer to actual timer part of the control block. */
581 timer_ptr = &(timer -> tm_actual_timer);
582
583 /* Determine what type of request is present. */
584 if ((enable == NU_ENABLE_TIMER) && (!timer -> tm_enabled))
585 {
586
587 /* Enable timer request is present and timer is currently disabled. */
588
589 /* Determine how to setup the remaining field in the actual timer. */
590 if (timer -> tm_expirations)
591
592 /* Use reschedule time since this timer has expired previously. */
593 time = timer -> tm_reschedule_time;
594 else
595
596 /* Use initial time since this timer has never expired. */
597 time = timer -> tm_initial_time;
598
599 /* Mark the application timer as enabled. */
600 timer -> tm_enabled = NU_TRUE;
601
602 /* Call the start timer routine to actually start the timer. */
603 TMC_Start_Timer(&(timer -> tm_actual_timer), time);
604 }
605 else if ((enable == NU_DISABLE_TIMER) && (timer -> tm_enabled))
606 {
607
608 /* Disable timer request is present and timer is currently enabled. */
609 TMC_Stop_Timer(timer_ptr);
610
611 /* Mark the timer as disabled. */
612 timer -> tm_enabled = NU_FALSE;
613 }
614
615 #ifdef INCLUDE_PROVIEW
616 _RTProf_DumpTimer(RT_PROF_CONTROL_TIMER,timer,RT_PROF_OK);
617 #endif /* INCLUDE_PROVIEW */
618 /* Release protection. */
619 TCT_Unprotect();
620
621 /* Return to user mode */
622 NU_USER_MODE();
623
624 /* Return the completion status. */
625 return(NU_SUCCESS);
626 }
627
628
629
630