FreeCalypso > hg > ffs-editor
diff src/cs/layer1/p_include/l1p_deft.h @ 0:92470e5d0b9e
src: partial import from FC Selenite
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Fri, 15 May 2020 01:28:16 +0000 |
parents | |
children |
line wrap: on
line diff
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/cs/layer1/p_include/l1p_deft.h Fri May 15 01:28:16 2020 +0000 @@ -0,0 +1,660 @@ +/************* Revision Controle System Header ************* + * GSM Layer 1 software + * L1P_DEFTY.H + * + * Filename l1p_deft.h + * Copyright 2003 (C) Texas Instruments + * + ************* Revision Controle System Header *************/ + +typedef struct +{ + WORD32 rand; + UWORD16 channel_request_data; + UWORD8 bs_prach_blks; + UWORD8 prach_alloc; + UWORD32 fn_to_report; +} +T_PRACH_INFO; + +typedef union +{ + UWORD16 prach_data[12]; + UWORD8 cs1_data[24]; +} +T_CHAN_REQ_DATA; + +typedef struct +{ + UWORD8 pol_resp_type; + T_CHAN_REQ_DATA chan_req; + UWORD32 fn; + UWORD8 timing_advance; + UWORD32 fn_to_report; +} +T_POLL_INFO; + + +typedef struct +{ + UWORD8 data_array[23]; + UWORD8 tn; + UWORD8 dl_tn_to_restore; + UWORD8 activity; +} +T_SINGLE_BLOCK; + + +typedef struct +{ + UWORD32 SignalCode; + UWORD8 assignment_id; + UWORD8 synchro_tn; + UWORD8 allocated_tbf; + UWORD8 dl_tbf_synchro_timeslot; + UWORD8 ul_tbf_synchro_timeslot; + UWORD8 transfer_synchro_timeslot; + + UWORD8 assignment_command; + UWORD8 multislot_class; + T_PACKET_TA packet_ta; + T_DL_POWER_CTL dl_pwr_ctl; + UWORD8 tsc; + T_PACKET_FREQ_PARAM freq_param; + UWORD8 mac_mode; + T_TBF_STI tbf_sti; + + T_UL_RESSOURCE_ALLOC *ul_tbf_alloc; + T_DL_RESSOURCE_ALLOC dl_tbf_alloc; + + BOOL interf_meas_enable; + UWORD8 ts_override; + BOOL pc_meas_chan; +} +T_TRANSFER_SET; + + +typedef struct +{ + UWORD8 ta_update_cmd; + UWORD8 assignment_id; + UWORD16 radio_freq; + UWORD8 activity; + BOOL request_dl; + T_PACKET_TA packet_ta; +} +T_PTCCH_PARAM; + +typedef struct +{ + UWORD8 tbf_release_cmd; + UWORD8 released_tbf; +} +T_TBF_RELEASE_PARAM; + +typedef struct +{ + UWORD8 pdch_release_cmd; + UWORD8 timeslot_available; + UWORD8 assignment_id; +} +T_PDCH_RELEASE_PARAM; + +typedef struct +{ + UWORD8 assignment_id; + UWORD8 txpwr[8]; + BOOL crc_error; + WORD8 bcch_level; + UWORD16 radio_freq_tbl[4]; + WORD8 burst_level[4]; +} +T_DL_PWR_CTRL; + +typedef struct +{ + UWORD8 psi_param_update_cmd; + UWORD8 Scell_pb; + UWORD8 access_burst_type; +} +T_PSI_PARAM_UPDATE; + +typedef struct +{ + BOOL semaphore; + + T_TRANSFER_SET *aset; + T_TRANSFER_SET *fset[2]; + T_TRANSFER_SET set[3]; + + T_UL_RESSOURCE_ALLOC ul_tbf_alloc[3]; + + T_SINGLE_BLOCK single_block; + + T_PTCCH_PARAM ptcch; + T_TBF_RELEASE_PARAM tbf_release_param; + T_PDCH_RELEASE_PARAM pdch_release_param; + T_MPHP_REPEAT_UL_FIXED_ALLOC_REQ repeat_alloc; + T_PSI_PARAM_UPDATE psi_param; + + T_DL_PWR_CTRL dl_pwr_ctrl; +} +T_TRANSFER_PARAM; + +/***************************************************************************************/ +/* L1S packet global variable structure... */ +/***************************************************************************************/ + +typedef struct +{ + BOOL new_set; + UWORD8 assignment_id; + UWORD8 allocated_tbf; + UWORD8 dl_tfi; + UWORD8 ul_tfi; + T_DL_POWER_CTL dl_pwr_ctl; + BOOL pc_meas_chan; + UWORD16 radio_freq_for_lna; +} T_READ_PARAM; + +typedef struct +{ + UWORD8 ILmin_beacon; + UWORD8 ILmin_others[8]; + + // No power control AGC algorithm variables + UWORD32 fn_select; + BOOL phase; + + // Downlink power control mode B variables + UWORD8 last_PR_good; + + // TBF Parameters used during the PDTCH read phase + T_READ_PARAM read_param; + + // Flag used to know if the pc_meas_chan measurement has been controlled + BOOL pc_meas_chan_ctrl; +} +T_L1PS_GLOBAL; + +/***********************************************************/ +/* L1PA global variable structure... */ +/***********************************************************/ +typedef struct +{ + // State for L1A state machines... + //----------------------------------------- + UWORD8 state[NBR_L1PA_PROCESSES]; + + // Measurement tasks management... + //----------------------------------------- + UWORD32 l1pa_en_meas[NBR_L1PA_PROCESSES]; +} +T_L1PA_GLOBAL; + + +/*************************************************************/ +/* Packet Idle mode tasks information... */ +/*************************************************************/ +/* must be filled according to Packet Idle parameters... */ +/* ... */ +/*************************************************************/ +// Packet Idle Parameter description +typedef struct +{ + UWORD16 radio_freq; + UWORD16 radio_freq_d; + UWORD16 radio_freq_dd; +} +T_P_IDLE_PARAM; + +// Packet Paging description +typedef struct +{ + // -------- Packet Paging description -------------- + UWORD8 bs_pag_blks_res; // BS_PAG_BLKS_RES parameter (cf. S921 specification) + UWORD8 bs_pbcch_blks; // BS_PBCCH_BLKS parameter (cf. S921 specification) + T_PACKET_CHANNEL_DESC packet_chn_desc; // Packet Channel Description: arfcn/Hopping description + TN + TSC + T_MOBILE_ALLOCATION frequency_list; // Mobile allocation description + UWORD8 nb_ppch_per_mf52;// Number of Packet PCCH per MF52 + UWORD16 first_pg_grp; // First Paging Group index + UWORD16 pg_blks_avail; // Number of Paging blocks available per MF52 + UWORD16 pg_offset; // (IMSI mo 1000) div (KC*N) (Note N = 1 for PCCCH) + UWORD16 split_pg_value; // Min(pg_blks_avail, split_pg_cycle) + + //-- + BOOL epg_computation; // Packet Paging STATE used in Extended Paging scheduling + UWORD16 pnp_period; // Paging Period = (52*64)/split_pg_value + WORD16 time_to_pnp; // Time to next PPCH block position. +} +T_PCCCH_PARAM; + +typedef struct +{ + BOOL change_synchro; + BOOL control_offset; + BOOL read_all_psi; + + UWORD8 nbr_psi; + UWORD8 bs_pbcch_blks; + UWORD8 psi1_repeat_period; + UWORD8 relative_position_array[20]; // Array for Relative position + UWORD16 offset_array[20]; // Array of offset computed from relative position + T_PACKET_CHANNEL_DESC packet_chn_desc; // Packet Channel Description: arfcn/Hopping description + TN + TSC + T_MOBILE_ALLOCATION frequency_list; // Mobile allocation description + UWORD8 rel_pos_to_report; // Relative Position of the PBCCH block read and to + // to report to L3. + UWORD16 pbcch_period; // PBCCH period = MFL52 * psi1_repaet_period; + UWORD8 tn_pbcch; // Time slot number relative for DSP point of view. +} +T_PBCCHS_PARAM; + +typedef struct +{ + BOOL change_synchro; + + UWORD8 pb; + UWORD8 bs_pbcch_blks; + UWORD8 psi1_repeat_period; + UWORD8 relative_position; // for Relative position + UWORD16 offset; // offset computed from relative position + T_PACKET_CHANNEL_DESC packet_chn_desc; // Packet Channel Description: arfcn/Hopping description + TN + TSC + T_MOBILE_ALLOCATION frequency_list; // Mobile allocation description + UWORD16 pbcch_period; // PBCCH period = MFL52 * psi1_repaet_period; + UWORD16 bcch_carrier; // beacon of the neighbor cell (used by the DSP) + WORD32 fn_offset; + WORD32 time_alignmt; +} +T_PBCCHN_PARAM; + +typedef struct +{ + BOOL dsp_r_page_switch_req; // If true, the dsp_r_page must be toggled in the interference measurement read + UWORD8 multislot_class; // Mobile multislot class + UWORD8 meas_bitmap; // Timeslots on which the interference measurements are done + UWORD8 position; // Position on which measurements must be done (search or ptcch frame) + UWORD8 idle_tn_rx; // Timeslot bitmap in packet idle with PCCCH on the frame before + UWORD8 idle_tn_no_rx; // Timeslot bitmap in packet idle without PCCCH on the frame before + UWORD16 radio_freq; // Radio freq. processed by l1s_hopping_algo() + T_PACKET_FREQ_PARAM packet_intm_freq_param; // Frequency parameters +} +T_ITMEAS_PARAM; + +typedef struct +{ + UWORD32 fn; // Absolute FN reported during the last measurement session + UWORD8 rxlev[8]; // Buffer used to save the parameters reported to L3 + UWORD8 meas_bitmap; // Interf meas bitmap. + UWORD8 id; // Id. +} T_L1A_INT_MEAS_PARAM; + +typedef struct +{ + UWORD8 lna; // Input level result + UWORD8 il; // LNA parameter +} +T_IL_LNA; + +typedef struct +{ + UWORD8 next_to_ctrl; // Carrier for next power measurement result. + UWORD8 next_to_read; // Next carrier to measure. + + UWORD8 pnp_ctrl; // Specify to l1s_meas_manager() that a PPCH burst has been ctrl. + + UWORD8 ms_ctrl; + UWORD8 ms_ctrl_d; + UWORD8 ms_ctrl_dd; + + T_IL_LNA used_il_lna[NB_MEAS_MAX_GPRS]; + T_IL_LNA used_il_lna_d[NB_MEAS_MAX_GPRS]; + T_IL_LNA used_il_lna_dd[NB_MEAS_MAX_GPRS]; +} +T_CR_FREQ_LIST; + +typedef struct +{ + UWORD8 nb_carrier; + UWORD16 freq_list[32+1]; + UWORD8 list_id; +} T_CRES_LIST_PARAM; + +typedef struct +{ + T_CRES_LIST_PARAM *alist; + T_CRES_LIST_PARAM *flist; + T_CRES_LIST_PARAM list[2]; +} T_CRES_FREQ_LIST; + +typedef struct +{ + UWORD8 tcr_next_to_ctrl; + UWORD8 tcr_next_to_read; + UWORD8 last_stored_tcr_to_read; + + UWORD8 ms_ctrl; + UWORD8 ms_ctrl_d; + UWORD8 ms_ctrl_dd; + + BOOL first_pass_flag; + + T_IL_LNA used_il_lna; + T_IL_LNA used_il_lna_d; + T_IL_LNA used_il_lna_dd; + + BOOL new_list_present; + + WORD8 beacon_meas; + + WORD8 fn_report; + UWORD8 cres_meas_report; + +} T_TCR_LIST_SET; + +/***************************************************************************************/ +/* L1A <-> L1S communication structure dedicated to packet mode */ +/***************************************************************************************/ +typedef struct +{ + // Packet Idle Parameters + + // PCCCH parameters + T_PCCCH_PARAM pccch; + + //-- + T_P_IDLE_PARAM p_idle_param; // Packet Idle Parameters description + + // Packet Access Parameters + T_PRACH_INFO pra_info; + + // Packet Access Parameters + T_POLL_INFO poll_info; + + // Packet Transfer Parameters + T_TRANSFER_PARAM transfer; + + // Serving Cell PBCCH parameters + T_PBCCHS_PARAM pbcchs; + + // Neigbour Cell PBCCH parameters + T_PBCCHN_PARAM pbcchn; + + // Interference measurement parameters + T_ITMEAS_PARAM itmeas; + + // Measurement tasks management... + //----------------------------------------- + UWORD32 meas_param; // Synchro semaphore bit register for packet measurement tasks. + UWORD32 l1ps_en_meas; // Enable packet Meas task bit register. + + // Access burst type + //------------------ + UWORD8 access_burst_type; + + // Frequency list Parameters used in Cell Reselection measurements + // --------------------------------------------------------------- + T_CR_FREQ_LIST cr_freq_list; + + // Parameters used in Packet Transfer Neighbour measurement task + // ------------------------------------------------------------- + T_TCR_LIST_SET tcr_freq_list; + + // Cell Reselection list, used both in Packet Idle and Packet Transfer + // ------------------------------------------------------------------- + T_CRES_FREQ_LIST cres_freq_list; + +} T_L1PA_L1PS_COM; + + +/***************************************************************************************/ +/* API (MCU <-> DSP) communication structures */ +/***************************************************************************************/ + +typedef struct +{ + // GPRS Extension............... + API d_task_d_gprs; // (map?) Task, burst per burst (part of header) + API d_task_u_gprs; // (map?) Task, burst per burst (part of header) + API d_task_pm_gprs; // (map?) Task, burst per burst (part of header) + API d_burst_nb_gprs; // (map?) burst identifier. (part of header) + API a_ctrl_abb_gprs[8]; // (map?) Analog baseband control, burst per burst. + API a_ctrl_power_gprs[8]; // (map?) Power control value, burst per burst. +} +T_DB_MCU_TO_DSP_GPRS; + +typedef struct +{ + // GPRS Extension............... + API d_task_d_gprs; // (map?) Task, burst per burst (part of header) + API d_task_u_gprs; // (map?) Task, burst per burst (part of header) + API d_task_pm_gprs; // (map?) Task, burst per burst (part of header) + API d_burst_nb_gprs; // (map?) burst identifier. (part of header) + + API a_burst_toa_gprs[8]; // (map?) Time of arrival, burst per burst + API a_burst_pm_gprs[8]; // (map?) Receive Power Level, burst per burst + API a_burst_angle_gprs[8];// (map?) Angle deviation, burst per burst + API a_burst_snr_gprs[8]; // (map?) Signal to noise ratio, burst per burst +} +T_DB_DSP_TO_MCU_GPRS; + +#if (DSP == 34) || (DSP == 35) || (DSP == 36) + typedef struct + { + // GEA module + API d_gea_mode; + API a_gea_kc[4]; + + API d_hole1_ndb_gprs[8]; + API d_a5mode_ovly; + + API d_sched_mode_gprs; + + API d_hole2_ndb_gprs[5]; + + API d_usf_updated_gprs; + API d_win_start_gprs; + API d_usf_vote_enable; + API d_bbctrl_gprs; + + API d_hole3_ndb_gprs[2]; + + // (map?) BTS physical timeslot mapping. + API a_ctrl_ched_gprs[8]; // (map?) Ched configuration, burst per burst + API a_ul_buffer_gprs[8]; // (map?) UL burst / UL buffer mapping, burst per burst. (part of header) + API a_usf_gprs[8]; + API a_interf_meas_gprs[8]; + + API a_ptcchu_gprs[4]; + + API a_dd_md_gprs[16]; + + API a_du_gprs[4][29]; + API a_pu_gprs[4][15]; + + API d_rlcmac_rx_no_gprs; + + API a_dd_gprs[8][31]; + + API a_ramp_gprs[8][16]; + + } + T_NDB_MCU_DSP_GPRS; + +#elif (DSP == 33) + typedef struct + { + // GEA module + API d_gea_mode; + API a_gea_kc[4]; + + API d_hole1_ndb_gprs[8]; + API d_a5mode_ovly; + + API d_sched_mode_gprs; + + API d_hole2_ndb_gprs[5]; + + API d_usf_updated_gprs; + API d_win_start_gprs; + API d_usf_vote_enable; + API d_bbctrl_gprs; + + API d_hole3_ndb_gprs[2]; + + // (map?) BTS physical timeslot mapping. + API a_ctrl_ched_gprs[8]; // (map?) Ched configuration, burst per burst + API a_ul_buffer_gprs[8]; // (map?) UL burst / UL buffer mapping, burst per burst. (part of header) + API a_usf_gprs[8]; + API a_interf_meas_gprs[8]; + + API a_ptcchu_gprs[4]; + + API a_dd_md_gprs[16]; + + API a_du_gprs[4][29]; + API a_pu_gprs[4][15]; + + API d_rlcmac_rx_no_gprs; + + API a_dd_gprs[8][31]; + + API a_ramp_gprs[8][16]; + + } + T_NDB_MCU_DSP_GPRS; + +#else + +typedef struct +{ + // GPRS Extension............... + API a_ramp_gprs[8][16]; + + #if (CODE_VERSION != SIMULATION) + API a_hole1_gprs[22]; // hole for a_du_1 and d_a5_mode + #endif + + API d_ptcchu_ctrl_abb_gprs; + API d_ptcchu_ctrl_power_gprs; + API d_ptcchd_burst_nb_gprs; + + #if (CODE_VERSION != SIMULATION) + API a_hole2_gprs[184]; + #endif + + API d_usf_updated_gprs; + API d_win_start_gprs; // (map?) BTS physical timeslot mapping. + API a_ctrl_ched_gprs[8]; // (map?) Ched configuration, burst per burst + API a_ul_buffer_gprs[8]; // (map?) UL burst / UL buffer mapping, burst per burst. (part of header) + API a_usf_gprs[8]; + API a_interf_meas_gprs[8]; + + API d_background_enable; + API d_background_abort; + API d_background_state; + API d_max_background; + API a_background_tasks[16]; + API a_back_task_io[10]; + + #if (CODE_VERSION != SIMULATION) + API a_hole3_gprs[19]; + #endif + API d_gea_mode; + + API a_gea_kc[4]; + + API d_sched_mode_gprs; + + #if (CODE_VERSION != SIMULATION) + API a_hole4_gprs[384]; + #endif + + API a_du_gprs[4][29]; + API d_rlcmac_rx_no_gprs; + API a_dd_gprs[4][31]; + API a_pu_gprs[4][15]; + + #if (CODE_VERSION != SIMULATION) + API a_hole5_gprs[112]; + #endif + + API a_ptcchu_gprs[4]; + API a_dd_md_gprs[16]; +} +T_NDB_MCU_DSP_GPRS; +#endif + +#if (DSP == 34) || (DSP == 35) || (DSP == 36) + typedef struct + { + // GPRS Extension............... + API_SIGNED d_overlay_rlcmac_cfg_gprs; + API_SIGNED d_mac_threshold; + API_SIGNED d_sd_threshold; + API_SIGNED d_nb_max_iteration; + } + T_PARAM_MCU_DSP_GPRS; +#elif (DSP == 33) + typedef struct + { + // GPRS Extension............... + API_SIGNED d_overlay_rlcmac_cfg_gprs; + API_SIGNED d_mac_threshold; + API_SIGNED d_sd_threshold; + API_SIGNED d_nb_max_iteration; + } + T_PARAM_MCU_DSP_GPRS; +#else + typedef struct + { + // GPRS Extension............... + API_SIGNED d_overlay_rlcmac_cfg_gprs; + API_SIGNED d_lat_mcu_bridge; + API_SIGNED d_lat_pll2div; + API_SIGNED d_lat_mcu_hom2sam; + API_SIGNED d_gprs_install_address; + API_SIGNED d_mac_threshold; + API_SIGNED d_sd_threshold; + API_SIGNED d_nb_max_iteration; + } + T_PARAM_MCU_DSP_GPRS; +#endif + +/***************************************************************************************/ +/* L1PS -> DSP communication structure... */ +/***************************************************************************************/ +typedef struct +{ + T_DB_DSP_TO_MCU_GPRS *pdsp_db_r_ptr; // MCU<->DSP comm. read page (Double Buffered comm. memory). + T_DB_MCU_TO_DSP_GPRS *pdsp_db_w_ptr; // MCU<->DSP comm. write page (Double Buffered comm. memory). + T_NDB_MCU_DSP_GPRS *pdsp_ndb_ptr; // MCU<->DSP comm. read/write (Non Double Buffered comm. memory). + T_PARAM_MCU_DSP_GPRS *pdsp_param_ptr; // MCU<->DSP comm. read/write (Param comm. memory). +} +T_L1PS_DSP_COM; + +/***************************************************************************************/ +/* L1PS -> MAC-S communication structure... */ +/***************************************************************************************/ + +typedef struct +{ + UWORD8 nb; // Number of error found + UWORD8 id[10]; // Error ID +} +T_MACS_STATUS; + +typedef struct +{ + BOOL new_set; // Set to 1 if allocation parameters have changed, reset by MAC-S + UWORD8 rx_allocation; // Downlink resources relative to Layer 1 frames + UWORD8 tx_nb_allocation; // Uplink resources used to transmit normal bursts relative to Layer 1 frames + UWORD8 tx_prach_allocation; // Uplink resources used to transmit PRACH bursts relative to Layer 1 frames + UWORD8 pwr_allocation; // Measurement gap relative to Layer 1 frames + BOOL fix_alloc_exhaust_flag; // Set to 1 if the fixed allocation has just exhausted + BOOL rlc_downlink_call; + T_MACS_STATUS macs_status; +} +T_L1PS_MACS_COM; + + +