FreeCalypso > hg > ffs-editor
diff src/cs/services/dar/dar_diagnose.c @ 0:92470e5d0b9e
src: partial import from FC Selenite
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Fri, 15 May 2020 01:28:16 +0000 |
| parents | |
| children |
line wrap: on
line diff
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/cs/services/dar/dar_diagnose.c Fri May 15 01:28:16 2020 +0000 @@ -0,0 +1,355 @@ +/****************************************************************************/ +/* */ +/* File Name: dar_diagnose.c */ +/* */ +/* Purpose: This function contains the DAR diagnose functions */ +/* */ +/* */ +/* Version 0.1 */ +/* */ +/* Date Modification */ +/* ------------------------------------ */ +/* 18 October 2001 Create */ +/* */ +/* Author Stephanie Gerthoux */ +/* */ +/* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved*/ +/****************************************************************************/ + +#include "rv/rv_defined_swe.h" +#ifdef RVM_DAR_SWE + #ifndef _WINDOWS + #include "timer/timer.h" + #endif + + #include "rv/rv_general.h" + #include "rvm/rvm_gen.h" + #include "rvm/rvm_priorities.h" + #include "dar/dar_api.h" + #include "dar/dar_structs_i.h" + #include "dar/dar_env.h" + #include "rvf/rvf_target.h" + #include "dar/dar_const_i.h" + #include "dar/dar_macro_i.h" + #include "dar/dar_messages_i.h" + #include "dar/dar_error_hdlr_i.h" + //#include "rvf/rvf_i.h" + + /**** Global variables ****/ + + /* Define a pointer to the Global Environment Control block */ + extern T_DAR_ENV_CTRL_BLK *dar_gbl_var_p; + + + + /********************************************************************************/ + /* Function dar_search_group */ + /* */ + /* Description This function checks if the use_id group_nb exists: */ + /* */ + /********************************************************************************/ + T_RV_RET dar_search_group(UINT16 group, UINT8 *index_p) + { + /* Declare local variables */ + UINT8 i=0; + + /* Check if the DAR entity is started */ + if (dar_gbl_var_p != NULL ) + { + /* Search in the dar_filter_array if the group exists */ + for (i=0;i< DAR_MAX_GROUP_NB; i++) + { + if(dar_gbl_var_p->dar_filter_array[i].group_nb == group) + { + *index_p=i; + //DAR_SEND_TRACE_PARAM("dar filter_array index",*index_p,RV_TRACE_LEVEL_DEBUG_LOW); + return(RV_OK); + } + } + return(RV_NOT_SUPPORTED); + } + else + { + return(RV_NOT_READY); + } + } + + /********************************************************************************/ + /* Function dar_add_group */ + /* */ + /* Description This function research the index of the first free group */ + /* */ + /********************************************************************************/ + T_RV_RET dar_add_group(UINT8 *index_p) + { + /* Declare local variables */ + UINT8 i=0; + + /* Check if the DAR entity is started */ + if (dar_gbl_var_p == NULL ) + { + dar_error_trace(DAR_ENTITY_NOT_START); + return(RV_NOT_READY); + } + + /* Search in the dar_filter_array the first free group */ + for (i=0;i< DAR_MAX_GROUP_NB; i++) + { + if(dar_gbl_var_p->dar_filter_array[i].group_nb == DAR_INITIALIZATION_VALUE) + { + *index_p=i; + return(RV_OK); + } + } + return(RV_NOT_SUPPORTED); + } + + + /********************************************************************************/ + /* */ + /* Function Name: dar_send_write_data */ + /* */ + /* Purpose: This function is called to send write data in the DAR mailbox */ + /* */ + /* Input Parameters: */ + /* Pointer to the message to store */ + /* Data Format, */ + /* Data level, */ + /* Data Use Id, */ + /* */ + /* Output Parameters: */ + /* Validation of the function execution. */ + /* */ + /* Note: */ + /* None */ + /* */ + /********************************************************************************/ + + T_RV_RET dar_send_write_data ( T_DAR_INFO *buffer_p, + T_DAR_FORMAT format, + T_DAR_LEVEL diagnose_info_level, + T_RVM_USE_ID dar_use_id) + { + /* Declare local variables */ + T_RVF_MB_STATUS mb_status = RVF_GREEN; + T_DAR_WRITE_START *write_data_p = NULL; + + /************************** dar_send_write_data **********************/ + + if (dar_gbl_var_p != NULL ) + { + /* allocate the memory for the message to send */ + mb_status = rvf_get_buf (dar_gbl_var_p->mb_dar, + sizeof (T_DAR_WRITE_START), + (T_RVF_BUFFER **) (&write_data_p)); + + /* If insufficient resources, then report a memory error and abort.*/ + if (mb_status == RVF_YELLOW) + { + /* deallocate the memory */ + rvf_free_buf((T_RVF_BUFFER *)write_data_p); + dar_error_trace(DAR_ENTITY_NO_MEMORY); + return (RV_NOT_SUPPORTED); + } + else + if (mb_status == RVF_RED) + { + dar_error_trace(DAR_ENTITY_NO_MEMORY); + return (RV_MEMORY_ERR); + } + + /* fill the message id */ + write_data_p->os_hdr.msg_id = DAR_WRITE_REQ; + + /* fill the addr source id */ + write_data_p->os_hdr.src_addr_id = dar_gbl_var_p->addrId; + + /* fill the message parameters */ + write_data_p->data_write.char_p = buffer_p ; + write_data_p->data_write.data_format = format; + write_data_p->data_write.level = diagnose_info_level; + write_data_p->data_write.use_id.group_nb = (dar_use_id>>16)& 0x7FFF; + write_data_p->data_write.use_id.mask = (dar_use_id)&0xFFFF; + + /* send the messsage to the DAR entity */ + rvf_send_msg (dar_gbl_var_p->addrId, + write_data_p); + + return (RV_OK); + } + else + { + return(RV_NOT_READY); + } + + + } /* dar_send_write_data */ + + /********************************************************************************/ + /* Function dar_reset */ + /* */ + /* Description This function is used to reset the system */ + /* */ + /* Input Parameters: */ + /* None */ + /* */ + /* Output Parameters: */ + /* Validation of the function execution. */ + /* */ + /* Note: */ + /* None */ + /* */ + /********************************************************************************/ + T_RV_RET dar_reset(void) + { + #ifndef _WINDOWS + /* Declare global variable*/ + volatile UINT16 *register_p; + volatile UINT8 i; + + + /* enable the Watchdog timer */ + TM_EnableWatchdog(); + + /* Reset the system with the Watchdog */ + /* initialize the adress of the watchdog timer pointer */ + register_p = (volatile UINT16 *)WATCHDOG_TIM_MODE; + + /* Write the 0xF5 value to the Watchdog timer mode register to disable the Watchdog*/ + /* Note the bit 15 must be unchanged ( bit 15 = 1 -> 0x8000)*/ + *register_p =0x80F5; + + /* Wait a couple of time to be sure that this register has a new value */ + for (i=0;i<100;i++); + + /* After having received 0xF5 in the Watchdog timer mode register, if the */ + /* second write access is differennt from 0xA0, ARM core is reset */ + /* The ARM HW core is reset + branch to adress 0x0000 ( SW reset) */ + *register_p=0x80F5; + + /* Wait until the ARM reset */ + while(1); + #endif + + return(RV_OK); + } /* dar_reset */ + + + /********************************************************************************/ + /* */ + /* Function dar_read_mbox */ + /* */ + /* Description Called by the dar to read a buffer from its mailboxes. */ + /* when the Operating System is out */ + /* Input Parameters: */ + /* None */ + /* */ + /* Output Parameters: */ + /* NULL if the mailbox was empty, else the address of a buffer */ + /* */ + /********************************************************************************/ + + void * dar_read_mbox (UINT8 mbox) + { + // void * p_buf = NULL; + // T_RVF_INTERNAL_BUF * p_hdr; + + /* Verify if DAR's global struct was set by RVM, then read the mailbox */ + if (dar_gbl_var_p != NULL ) + return rvf_read_addr_mbox (dar_gbl_var_p->addrId, mbox); + + return NULL; + + // Check if the DAR entity is started + /*if (dar_gbl_var_p != NULL ) + { + + if ( OSTaskQFirst[dar_gbl_var_p->addrId][mbox] )// if the chained list is not empty + { + p_hdr = OSTaskQFirst[dar_gbl_var_p->addrId][mbox]; + OSTaskQFirst[dar_gbl_var_p->addrId][mbox] = p_hdr->p_next; + + p_hdr->p_next = NULL; + + #if RVF_ENABLE_BUF_LINKAGE_CHECK + RVF_SET_BUF_UNLINKED(p_hdr); // change buffer status + #endif + + p_buf = (UINT8 *)p_hdr + sizeof(T_RVF_INTERNAL_BUF); + } + } + return (p_buf); */ + } // dar_read_mbox + +#else + + /* ******************************************************* */ + /* THE DAR ENTITY IS DISABLED */ + /* ******************************************************* */ + #ifndef _WINDOWS + #include "config/swconfig.cfg" + #include "config/sys.cfg" + #include "config/chipset.cfg" + #include "timer/timer.h" + #endif + + #include "rv/rv_general.h" + #include "rvm/rvm_gen.h" + #include "rvm/rvm_priorities.h" + #include "rvf/rvf_target.h" + //#include "rvf/rvf_i.h" + + /* Define the Watchdog timer register mode */ + #define WATCHDOG_TIM_MODE (0xFFFFF804) + + + /********************************************************************************/ + /* Function dar_reset */ + /* */ + /* Description This function is used to reset the system */ + /* */ + /* Input Parameters: */ + /* None */ + /* */ + /* Output Parameters: */ + /* Validation of the function execution. */ + /* */ + /* Note: */ + /* None */ + /* */ + /********************************************************************************/ + T_RV_RET dar_reset(void) + { + #ifndef _WINDOWS + /* Declare global variable*/ + volatile UINT16 *register_p; + volatile UINT8 i; + + + /* enable the Watchdog timer */ + TM_EnableWatchdog(); + + /* Reset the system with the Watchdog */ + /* initialize the adress of the watchdog timer pointer */ + register_p = (volatile UINT16 *)WATCHDOG_TIM_MODE; + + /* Write the 0xF5 value to the Watchdog timer mode register to disable the Watchdog*/ + /* Note the bit 15 must be unchanged ( bit 15 = 1 -> 0x8000)*/ + *register_p =0x80F5; + + /* Wait a couple of time to be sure that this register has a new value */ + for (i=0;i<100;i++); + + /* After having received 0xF5 in the Watchdog timer mode register, if the */ + /* second write access is differennt from 0xA0, ARM core is reset */ + /* The ARM HW core is reset + branch to adress 0x0000 ( SW reset) */ + *register_p=0x80F5; + + /* Wait until the ARM reset */ + while(1); + #endif + + return(RV_OK); + } /* dar_reset */ + +#endif /* #ifdef RVM_DAR_SWE */