FreeCalypso > hg > freecalypso-citrine

comparison L1/tm_cust0/l1tm_cust.h @ 0:75a11d740a02

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
initial import of gsm-fw from freecalypso-sw rev 1033:5ab737ac3ad7
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 09 Jun 2016 00:02:41 +0000
parents
children
comparison
equal deleted inserted replaced
-1:000000000000 0:75a11d740a02
1 /************* Revision Controle System Header *************
2 * GSM Layer 1 software
3 * L1TM_CUST.H
4 *
5 * Filename l1tm_cust.h
6 * Copyright 2003 (C) Texas Instruments
7 *
8 ************* Revision Controle System Header *************/
9
10
11 /*---------------------------------------------------------*/
12 /* Initial settings for test mode config => Cust_tm_init() */
13 /*---------------------------------------------------------*/
14
15 // Control algorithm settings: 0=>OFF, 1=>ON
16 #define AGC_ENABLE 1
17 #define AFC_ENABLE 1
18
19 // ADC conversion setting: 0=>OFF, 1=>ON
20 #define ADC_ENABLE 1
21
22 // AGC settings
23 #define TM_AGC_VALUE 50 // AGC gain
24 #define TM_LNA_OFF 0 // 0=>LNA ON, 1=>LNA OFF
25
26 // Power measurement settings
27 #define TM_NUM_MEAS 1 // number of measurements per TDMA
28 #define TM_WIN_MEAS 1 // position of measurement within TDMA
29
30 // BEACON and TCH settings
31 #define TM_BCCH_ARFCN 80 // beacon
32 #define TM_TCH_ARFCN 62 // TCH arfcn
33 #define TM_MON_ARFCN 33 // monitor arfcn
34 #define TM_CHAN_TYPE TCH_F // channel type
35 #define TM_SUB_CHAN 0 // subchannel number
36 #define TM_SLOT_NUM 4 // TS number
37 #define TM_TSC 5 // Training Sequence
38 #define TM_TXPWR 15 // TXPWR setting
39 #define TM_TXPWR_SKIP 4
40 #define TM_TA 0 // timing advance setting
41 #define TM_BURST_TYPE 0 // 0=>normal burst, 1=>RACH burst
42 #define TM_BURST_DATA 0 // as defined in TM100.doc: tx_param_write
43 #define TM_PM_ENABLE 1 // Enable power measurements in packet transfer mode
44
45 // Statistics settings
46 #define TM_NUM_LOOPS 0 // number of times a task is executed, 0 means infinite loop
47 #define TM_AUTO_RESULT_LOOPS 0 // number of loops before stats result is returned, 0 means infinite
48 #define TM_AUTO_RESET_LOOPS 0 // number of loops before stats I/F is reset, 0 means infinite
49 #define TM_STAT_TYPE 1 // type of stats as defined in TM100.doc: stats_read
50 #define TM_STAT_BITMASK 0x6057 // stats bitmaks as defined in TM100.doc: stats_read
51
52 #if L1_GPRS
53 // Settings for GPRS test mode:
54 #define TM_PDTCH_ARFCN 62 // PDTCH arfcn
55 #define TM_MULTISLOT_CLASS 1 // GPRS multi slot class
56 #define TM_STAT_GPRS_SLOTS 0x80 // Bit mask for RX stats from PDTCH
57 #define TM_RX_ALLOCATION 0x80 // RX slot allocation (bit7->TS0...bit0->TS7)
58 #define TM_RX_CODING_SCHEME 1 // RX coding scheme
59 #define TM_TX_ALLOCATION 0x80 // TX slot allocation (bit7->TS0...bit0->TS7)
60 #define TM_TX_CODING_SCHEME 2 // TX coding scheme
61 #define TM_TXPWR_GPRS 15 // GPRS txpwr level
62 #endif
63
64
65
66