FreeCalypso > hg > freecalypso-citrine

comparison cfgmagic/post-target @ 0:75a11d740a02

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
initial import of gsm-fw from freecalypso-sw rev 1033:5ab737ac3ad7
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 09 Jun 2016 00:02:41 +0000
parents
children 7c13c26f1aa4
comparison
equal deleted inserted replaced
-1:000000000000 0:75a11d740a02
1 # This shell script fragment is sourced after the selected target.
2 # Here we'll put code that logically goes with the target hw-related
3 # stuff, but which we wish to avoid duplicating in every target.*
4 # fragment.
5
6 # The per-target fragment must have defined CONFIG_IRAM_SIZE, CONFIG_XRAM_SIZE
7 # and CONFIG_FWFLASH_SIZE.
8 if [ -z "$CONFIG_IRAM_SIZE" ]
9 then
10 echo "Error: target.$TARGET failed to define CONFIG_IRAM_SIZE" 1>&2
11 exit 1
12 fi
13
14 if [ -z "$CONFIG_XRAM_SIZE" ]
15 then
16 echo "Error: target.$TARGET failed to define CONFIG_XRAM_SIZE" 1>&2
17 exit 1
18 fi
19
20 if [ -z "$CONFIG_FWFLASH_SIZE" ]
21 then
22 echo "Error: target.$TARGET failed to define CONFIG_FWFLASH_SIZE" 1>&2
23 exit 1
24 fi
25
26 # export them to C and to the m4-based ld script generation logic
27 export_to_c CONFIG_IRAM_SIZE
28 export_to_m4 CONFIG_IRAM_SIZE
29 export_to_c CONFIG_XRAM_SIZE
30 export_to_m4 CONFIG_XRAM_SIZE
31 export_to_c CONFIG_FWFLASH_SIZE
32 export_to_m4 CONFIG_FWFLASH_SIZE
33
34 # Because we'll be using a lot of TI's code that is very liberally sprinkled
35 # with conditionals on their voodoo numbers for CHIPSET etc, we really have
36 # no choice but to continue using these nasty numbers, at least where
37 # possible.
38
39 if [ -z "$DBB_type" ]
40 then
41 echo "Error: target.$TARGET failed to define DBB_type" 1>&2
42 exit 1
43 fi
44
45 case "$DBB_type" in
46 751992*)
47 # This chip is Calypso C035 with DSP version 36 in the ROM
48 CHIPSET=10
49 DSP=36
50 # Thanks to the Sotovik find, we now have authoritative
51 # knowledge that these numbers are correct.
52 ;;
53 751749*)
54 # Calypso Lite appears to be exactly the same as Calypso C035,
55 # but has only 256 KiB of IRAM instead of 512 KiB. Yet TI's
56 # firmware sources give it a different CHIPSET number.
57 # Let's try playing along...
58 CHIPSET=11
59 DSP=36
60 ;;
61 *)
62 echo "Error: unknown DBB_type=$DBB_type" 1>&2
63 exit 1
64 ;;
65 esac
66 export_to_c CHIPSET
67 export_to_c DSP
68
69 if [ -z "$ABB_type" ]
70 then
71 echo "Error: target.$TARGET failed to define ABB_type" 1>&2
72 exit 1
73 fi
74
75 case "$ABB_type" in
76 Iota*)
77 ANALOG=2
78 ;;
79 Syren*)
80 ANALOG=3
81 ;;
82 *)
83 echo "Error: unknown ABB_type=$ABB_type" 1>&2
84 exit 1
85 ;;
86 esac
87 export_to_c ANALOG
88
89 if [ -z "$RF_type" ]
90 then
91 echo "Error: target.$TARGET failed to define RF_type" 1>&2
92 exit 1
93 fi
94
95 case "$RF_type" in
96 Rita*)
97 RF_FAM=12
98 RF_PG=2
99 ;;
100 *)
101 echo "Error: unknown RF_type=$RF_type" 1>&2
102 exit 1
103 ;;
104 esac
105 export_to_c RF_FAM
106 export_to_c RF_PG
107
108 if [ -z "$RF_PA" ]
109 then
110 echo "Error: target.$TARGET failed to define RF_PA" 1>&2
111 exit 1
112 fi
113 export_to_c RF_PA
114
115 if [ -z "$Flash_type" ]
116 then
117 echo "Error: target.$TARGET failed to define Flash_type" 1>&2
118 exit 1
119 fi
120
121 case "$Flash_type" in
122 AMD-multi*)
123 FLASH_IS_AMD_MULTIBANK=1
124 export_to_c FLASH_IS_AMD_MULTIBANK
125 ;;
126 Intel-single* | Intel-one*)
127 FLASH_IS_INTEL_ONEBANK=1
128 export_to_c FLASH_IS_INTEL_ONEBANK
129 export_to_mk FLASH_IS_INTEL_ONEBANK
130 ;;
131 *)
132 echo "Error: unknown Flash_type=$Flash_type" 1>&2
133 exit 1
134 ;;
135 esac
136
137 # !!! Dirty hack !!!
138 #
139 # All targets which we currently support or have realistic prospects of
140 # supporting are derived from TI's D-sample and/or Leonardo reference designs.
141 # TI's voodoo BOARD number for D-sample is 41, and Leonardo apparently
142 # shared D-sample's number instead of having its own.
143 # My initial hope was to keep those BOARD conditionals out of our code,
144 # but they are sprinkled so liberally throughout TI's code that it's
145 # too much extra work to reshape them into something cleaner.
146 # So for now let's export a #define BOARD 41 for all targets
147 # and leave it be.
148
149 BOARD=41
150 export_to_c BOARD