--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/bsp/rtc/rtc_config.h	Thu Jun 09 00:02:41 2016 +0000
@@ -0,0 +1,114 @@
+/******************************************************************************/
+/*                                                                            */
+/*    File Name:   rtc_config.h                                               */
+/*                                                                            */
+/*    Purpose:   This file contains adresses for RTC register access.         */
+/*               and defined value                                            */
+/*                                                                            */
+/*    Note:      None.                                                        */
+/*                                                                            */
+/*    Revision History:                                                       */
+/*    05/31/01   Laurent Sollier      Create.                                 */
+/*                                                                            */
+/* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved  */
+/*                                                                            */
+/******************************************************************************/
+
+#ifndef _RTC_CONFIG_H_
+#define _RTC_CONFIG_H_
+
+#include "../../include/config.h"
+
+#include "../mem.h" 
+#include "../../riviera/rv/general.h"
+
+
+/* FOR ULYSSE AND CALYPSO CHIP */
+				/* Seconds register */
+#define RTC_SECONDS_REG		(UINT8 *)(RTC_XIO_START)
+				/* Minutes register */
+#define RTC_MINUTES_REG		((UINT8 *)(RTC_XIO_START) + 0x01)
+				/* Hours register */
+#define RTC_HOURS_REG		((UINT8 *)(RTC_XIO_START) + 0x02)
+				/* Days register */
+#define RTC_DAYS_REG		((UINT8 *)(RTC_XIO_START) + 0x03)
+				/* Months register */
+#define RTC_MONTHS_REG		((UINT8 *)(RTC_XIO_START) + 0x04)
+				/* Years register */
+#define RTC_YEARS_REG		((UINT8 *)(RTC_XIO_START) + 0x05)
+				/* Week register */
+#define RTC_WEEK_REG		((UINT8 *)(RTC_XIO_START) + 0x06)
+				/* Alarms seconds register */
+#define RTC_ALARM_SECONDS_REG	((UINT8 *)(RTC_XIO_START) + 0x08)
+				/* Alarms minutes register */
+#define RTC_ALARM_MINUTES_REG	((UINT8 *)(RTC_XIO_START) + 0x09)
+				/* Alarms hours register */
+#define RTC_ALARM_HOURS_REG	((UINT8 *)(RTC_XIO_START) + 0x0A)
+				/* Alarms days register */
+#define RTC_ALARM_DAYS_REG	((UINT8 *)(RTC_XIO_START) + 0x0B)
+				/* Alarms months register */
+#define RTC_ALARM_MONTHS_REG	((UINT8 *)(RTC_XIO_START) + 0x0C)
+				/* Alarms years register */
+#define RTC_ALARM_YEARS_REG	((UINT8 *)(RTC_XIO_START) + 0x0D)
+				/* Control register */
+#define RTC_CTRL_REG		((UINT8 *)(RTC_XIO_START) + 0x10)
+				/* Status register */
+#define RTC_STATUS_REG		((UINT8 *)(RTC_XIO_START) + 0x11)
+				/* Interrupts register */
+#define RTC_INTERRUPTS_REG	((UINT8 *)(RTC_XIO_START) + 0x12)
+				/* LSB compensation register */
+#define RTC_COMP_LSB_REG	((UINT8 *)(RTC_XIO_START) + 0x13)
+				/* MSB compensation register */
+#define RTC_COMP_MSB_REG	((UINT8 *)(RTC_XIO_START) + 0x14)
+
+/* RTC Control register description */
+
+#define RTC_START_RTC		0x0001	/* 1 => RTC is running */
+#define RTC_ROUND_30S		0x0002	/* Time rounded to the closest minute */
+#define RTC_AUTO_COMP		0x0004	/* Auto compensation enabled or not */
+#define RTC_MODE_12_24		0x0008	/* 12 hours mode*/
+#define RTC_TEST_MODE		0x0010	/* Test mode */
+#define RTC_SET_32_COUNTER	0x0020 	/* set 32 KHz counter with comp_reg */
+#if ((CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11))
+    #define RTC_nDELTA_OMEGA	0x0040  /* Analog Baseband Type */
+#endif
+
+
+/* RTC Interrupt register description */
+
+#define RTC_EVERY	0x0003
+	/* Define period of periodic interrupt (second, minute, hour, day) */
+#define RTC_IT_TIMER	0x0004		/* Enable periodic interrupt */
+#define RTC_IT_ALARM	0x0008		/* Alarm interrupt enabled or not */	
+
+/* RTC Status register description */
+
+#define RTC_BUSY	0x0001
+#define RTC_RUN		0x0002		/* RTC is running */
+#define RTC_1S_EVENT	0x0004		/* One second has occured */
+#define RTC_1M_EVENT	0x0008		/* One minute has occured */
+#define RTC_1H_EVENT	0x0010		/* One hour has occured */
+#define RTC_1D_EVENT	0x0020		/* One day has occrued */
+#define RTC_ALARM	0x0040		/* Alarm interrupt has been generated */
+#define RTC_POWER_UP	0x0080		/* Indicates that a reset occured */
+
+#define RTC_EVERY_SEC	0x0000
+#define RTC_EVERY_MIN  	0x0001
+#define RTC_EVERY_HR	0x0002
+#define RTC_EVERY_DAY	0x0003
+
+/* 32 Khz and HF clock definition */
+#define RTC_CLOCK_32K 32768.0
+
+	/* HF clock definition */
+#if ((CHIPSET == 3) || (CHIPSET == 5) || (CHIPSET == 6))
+	#define RTC_CLOCK_HF 65000000.0
+#elif ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8))
+	#define RTC_CLOCK_HF 78000000.0
+#elif ((CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12))
+	#define RTC_CLOCK_HF 104000000.0
+#endif
+
+
+
+#endif /* #ifndef _RTC_CONFIG_H_ */