--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/g23m-aci/aci/cmh_uarts.c	Thu Jun 09 00:02:41 2016 +0000
@@ -0,0 +1,1111 @@
+/*
++-----------------------------------------------------------------------------
+|  Project :  GSM-PS (6147)
+|  Modul   :  CMH_UARTS
++-----------------------------------------------------------------------------
+|  Copyright 2002 Texas Instruments Berlin, AG
+|                 All rights reserved.
+|
+|                 This file is confidential and a trade secret of Texas
+|                 Instruments Berlin, AG
+|                 The receipt of or possession of this file does not convey
+|                 any rights to reproduce or disclose its contents or to
+|                 manufacture, use, or sell anything it may describe, in
+|                 whole, or in part, without the specific written consent of
+|                 Texas Instruments Berlin, AG.
++-----------------------------------------------------------------------------
+|  Purpose :
++-----------------------------------------------------------------------------
+*/
+
+#include "config.h"
+#include "fixedconf.h"
+#include "condat-features.h"
+#include "aci_conf.h"
+
+#ifdef UART
+
+#ifndef CMH_UARTS_C
+#define CMH_UARTS_C
+#endif
+
+#include "aci_all.h"
+/*==== INCLUDES ===================================================*/
+#include "aci_cmh.h"
+#include "ati_cmd.h"
+#include "aci_cmd.h"
+#include "dti.h"      /* functionality of the dti library */
+
+#include "aci.h"
+#include "psa.h"
+#include "aci_fd.h"
+#include "cmh.h"
+
+#include "aci_lst.h"
+
+#include "dti_conn_mng.h"
+#include "dti_cntrl_mng.h"
+#include "psa_uart.h"
+#include "cmh_uart.h"
+#include "sap_dti.h"
+#ifdef FF_PSI
+#include "psa_psi.h"
+#include "cmh_psi.h"
+#endif /*FF_PSI*/
+#include "aci_mem.h"
+#include "aci_io.h"
+#include "l4_tim.h"
+
+#include "psa_cc.h"
+
+typedef struct      /* + IPR parameter */
+{
+  T_ACI_BD_RATE rate;
+  T_ACI_CMD_SRC srcId;
+}
+T_ACI_IPR;
+
+EXTERN T_ACI_LIST *ati_src_list;
+
+/*==== CONSTANTS ==================================================*/
+
+/*==== EXPORT =====================================================*/
+EXTERN char  *cmdErrStr;          /* Error Message            */
+static T_ACI_IPR uart_ipr_param;
+EXTERN CHAR  *cmdAtError (AtErrCode e);
+
+/*==== VARIABLES ==================================================*/
+
+GLOBAL T_ACI_LIST *uart_src_params = NULL;
+GLOBAL T_ACI_UART_MUX_PARMS holdMuxParms;
+
+/*
+ *  uart_com_par: Lists all COM parameter for every device.
+ *
+ *  This list is only used so long as the UART SAP don't support parameter getting.
+ *
+ */
+GLOBAL T_ACI_LIST *uart_com_par = NULL;
+
+/*==== FUNCTIONS ==================================================*/
+
+GLOBAL void cmhUART_lst_init (void)
+{
+  TRACE_FUNCTION ("cmhUART_lst_init()");
+  uart_src_params = new_list ();
+  /*psi_src_params = new_list();*/
+
+  if ( !uart_com_par )
+    uart_com_par = new_list ();
+ /* if (!psi_dev_list)
+    psi_dev_list = new_list();*/
+}
+
+
+GLOBAL T_ACI_BD_RATE convert_mux_port_speed (UBYTE mux_port_speed)
+{
+  switch (mux_port_speed)
+  {
+    case 1:
+      return (BD_RATE_9600);
+
+    case 2:
+      return (BD_RATE_19200);
+
+    case 3:
+      return (BD_RATE_38400);
+
+    case 4:
+      return (BD_RATE_57600);
+
+    case 5:
+      return (BD_RATE_115200);
+
+    default:
+      return (BD_RATE_NotPresent);
+  }
+}
+
+/*
++-------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)    MODULE  : CMH_PHBS                     |
+| STATE   : code             ROUTINE : sAT_PlusCMUX                 |
++-------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart of the +CMUX
+            AT command which is responsible for starting multiplexing transactions.
+
+*/
+GLOBAL T_ACI_RETURN sAT_PlusCMUX ( T_ACI_CMD_SRC srcId,
+                                   UBYTE mode,
+                                   UBYTE subset,
+                                   UBYTE port_speed,
+                                   USHORT N1,
+                                   UBYTE T1,
+                                   UBYTE N2,
+                                   UBYTE T2,
+                                   UBYTE T3 )
+{
+
+#ifdef DTI
+  T_ACI_DTI_PRC *src_infos = NULL;
+  T_ACI_UART_MUX_PARMS *MuxParms = NULL;
+  T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, (UBYTE)srcId, search_ati_src_id); 
+
+  TRACE_FUNCTION ("sAT_PlusCMUX()");
+
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    return (AT_FAIL);
+  }
+
+  src_infos = find_element (uart_src_params, (UBYTE)srcId, cmhUARTtest_srcId);
+  if (src_infos EQ NULL)
+  {
+    TRACE_EVENT_P1("[ERR] sAT_PlusCMUX(): srcId=%d not found", srcId) ;
+    return (AT_FAIL);
+  }
+ 
+  /*
+   * AT+CMUX needs to get the answer OK before it sends the 
+   * primitives to UART, because channel is then already closed.
+   */ 
+  io_sendConfirm ( (UBYTE)srcId, cmdAtError ( atOk ), ATI_NORMAL_OUTPUT );
+  cmdErrStr = NULL;
+
+  ACI_MALLOC( src_infos ->MuxParms, sizeof(T_ACI_UART_MUX_PARMS) );
+  
+  MuxParms = src_infos -> MuxParms;
+  /* memorize parameters */
+  MuxParms->mode       = mode;
+  MuxParms->subset     = subset;
+  MuxParms->port_speed = port_speed;
+  MuxParms->N1         = N1;
+  MuxParms->T1         = T1;
+  MuxParms->N2         = N2;
+  MuxParms->T2         = T2;
+  MuxParms->T3         = T3;
+
+  if ((src_infos->data_buffer.data_list EQ NULL)
+    AND (aci_src_dti_params[srcId].dtxState EQ READY) )
+  {
+    uartEntcurCmd[srcId] = AT_CMD_NONE;
+    if ((cmhUART_CMUX (srcId)) EQ FALSE)
+    {
+      /*
+       * we already sent an OK according to GSM 27.010, but now the muxer is not ready !
+       * this AT_FAIL results in a ATI_FAIL_NO_OUTPUT at function setatPlusCMUX().
+       * so, what will the source do in this case ?
+       */       
+      TRACE_EVENT("[ERR] sAT_PlusCMUX()(): UART muxer not ready");
+      return (AT_FAIL);
+    }
+  }
+  else
+  {
+      /*Now we wait for the dtx state to be ready and the multiplexer will be started 
+       from function sig_dti_tx_buffer_ready_ind() after the data buffer of the source is 
+       emptied*/
+   uartEntcurCmd[srcId] = AT_CMD_CMUX;
+  }  
+  return ( AT_EXCT );
+#else 
+  return ( AT_FAIL );
+#endif /* DTI */
+  
+}
+
+GLOBAL T_ACI_RETURN qAT_PlusCMUX ( T_ACI_CMD_SRC srcId,
+                                   UBYTE *mode,
+                                   UBYTE *subset,
+                                   UBYTE *port_speed,
+                                   USHORT *N1,
+                                   UBYTE *T1,
+                                   UBYTE *N2,
+                                   UBYTE *T2,
+                                   UBYTE *T3 )
+{
+  TRACE_FUNCTION ("qAT_PlusCMUX()");
+
+  if ( (holdMuxParms.mode EQ 0) AND (holdMuxParms.subset EQ 0) AND
+       (holdMuxParms.port_speed EQ 0) AND (holdMuxParms.N1 EQ 0) AND
+       (holdMuxParms.T1 EQ 0) AND (holdMuxParms.N2 EQ 0) AND
+       (holdMuxParms.T2 EQ 0) AND (holdMuxParms.T3 EQ 0) )
+  {
+    TRACE_FUNCTION("No Mux is enabled");
+    return (AT_FAIL);
+  }
+  *mode       = holdMuxParms.mode;
+  *subset     = holdMuxParms.subset;
+  *port_speed = holdMuxParms.port_speed;
+  *N1         = holdMuxParms.N1;
+  *T1         = holdMuxParms.T1;
+  *N2         = holdMuxParms.N2;
+  *T2         = holdMuxParms.T2;
+  *T3         = holdMuxParms.T3;
+
+  return ( AT_CMPL );
+}
+
+GLOBAL BOOL cmhUART_CMUX (T_ACI_CMD_SRC srcId)
+{
+  T_ACI_DTI_PRC *src_infos = NULL;
+  T_ACI_BD_RATE speed = BD_RATE_NotPresent;
+  
+  TRACE_FUNCTION ("cmhUART_CMUX()");
+    
+  src_infos = find_element (uart_src_params, (UBYTE)srcId, cmhUARTtest_srcId);
+
+  if (src_infos EQ NULL)
+  {
+    TRACE_EVENT_P1("[ERR] sAT_PlusCMUX(): srcId=%d not found", srcId) ;
+    return (FALSE);
+  }
+  
+  if (cmhUART_stopConnection ((UBYTE)srcId))
+  {
+    if (src_infos->MuxParms)
+    {
+      speed = convert_mux_port_speed (src_infos->MuxParms->port_speed);
+      
+      if ( speed NEQ BD_RATE_NotPresent )
+      {
+        /*
+         * at first we have to change the baud rate (primitive to UART)
+         */
+        if (cmhUART_SetDataRate ((UBYTE)srcId, speed) EQ AT_EXCT)
+        {
+          return (TRUE);
+        }
+        else
+        {
+          TRACE_EVENT("[ERR] cmhUART_CMUX(): not able to change baud rate");
+          return (FALSE);
+        }
+      }
+      /*
+       * void function, sends the UART_MUX_START_REQ primitive
+       * return value is handled by the confirmation
+       */
+      psaUART_StartMux( src_infos->device,
+                        src_infos->MuxParms->mode,
+                        src_infos->MuxParms->subset,
+                        src_infos->MuxParms->N1,
+                        src_infos->MuxParms->T1,
+                        src_infos->MuxParms->N2,
+                        src_infos->MuxParms->T2,
+                        src_infos->MuxParms->T3);
+      
+      memcpy( (CHAR *)&holdMuxParms, (CHAR *)src_infos->MuxParms, sizeof(T_ACI_UART_MUX_PARMS));
+      ACI_MFREE( src_infos->MuxParms );
+      src_infos->MuxParms = NULL;
+      return (TRUE);
+    }
+    else   
+    {
+      TRACE_EVENT("[ERR] cmhUART_CMUX(): no muxer parameters available");
+    }
+  }
+  else   
+  {
+    TRACE_EVENT("[ERR] cmhUART_CMUX(): not able to stop UART connection");
+  }
+  return (FALSE);  
+}
+
+/*
++-------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_DTIS                |
+|                                 ROUTINE : cmhUART_getdata         |
++-------------------------------------------------------------------+
+
+  PURPOSE : tell DTI that ACI is ready to receive more datas.
+*/
+GLOBAL void cmhUART_getdata ( T_ACI_CMD_SRC srcId )
+{
+  TRACE_FUNCTION ("cmhUART_getdata");
+
+#ifdef RMV_01_04_03
+#ifdef FF_TWO_UART_PORTS
+  if (srcId NEQ UART_DATA_CHANNEL)
+  {
+    psaDTI_getdata ( (UBYTE)srcId, DTI_ENTITY_UART);
+  }
+#else
+  psaDTI_getdata ( (UBYTE)srcId, DTI_ENTITY_UART);
+#endif
+#endif
+
+  psaDTI_getdata ( (UBYTE)srcId, DTI_ENTITY_UART);
+
+}
+
+/*
++-------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_DTIS                |
+|                                 ROUTINE : cmhUART_startConnection |
++-------------------------------------------------------------------+
+
+  PURPOSE : start a DTI connection with UART.
+*/
+
+GLOBAL void cmhUART_startConnection (UBYTE srcId,
+                                     T_ACI_DEVICE_TYPE device_type)
+{
+  T_ACI_DTI_PRC         *src_infos;
+  T_ACI_DEVICE_ENTRY    *device_entry;
+  T_ACI_DEVICE_TYPE curr_device_type;
+  T_DTI_ENTITY_ID entity_list[] = {DTI_ENTITY_ACI};
+
+  TRACE_FUNCTION ("cmhUART_startConnection ()");
+
+  src_infos = find_element (uart_src_params, (UBYTE)srcId, cmhUARTtest_srcId);
+  if (src_infos EQ NULL)
+  {
+    TRACE_EVENT_P1("[ERR] cmhUART_startConnection: srcId=%d not found",
+                   srcId) ;
+    return ;
+  }
+
+  device_entry = cmhUART_GetDeviceParOverDevice( src_infos->device );
+
+  if ( device_entry EQ NULL )
+  {
+    TRACE_EVENT_P1("[ERR] cmhUART_startConnection: device=%d not found", src_infos->device) ;
+    return;
+  }
+
+  curr_device_type = cmhUART_GetDeviceType (srcId);
+
+  switch (curr_device_type)
+  {
+    case DEVICE_TYPE_UNKNOWN:
+      /* register device to the DTI Control Manager */
+#ifdef DTI
+      dti_cntrl_new_device ( srcId,                             /* ATI source ID       */
+                             DTI_ENTITY_UART,                   /* device ID           */
+                             src_infos->device,                 /* device number       */
+                             src_infos->dlci,                   /* sub-channel number  */
+                             DTI_PORT_NUMBER_NOTPRESENT,        /* ATI-RIV port number */
+                             DTI_CPBLTY_CMD | DTI_CPBLTY_SER,   /* capabilities        */
+                             DTI_DRIVER_ID_NOTPRESENT,
+                             DTI_DIO_ID_NOTPRESENT); 
+
+#endif /* DTI */
+      /* set device type */
+      cmhUART_ChangeDeviceType  (srcId, device_type);
+      break;
+
+    default:
+      break;
+  } /* switch */
+
+  if (device_type EQ DEVICE_TYPE_URT)
+  {
+    /* initialize UART */
+    psaUART_SetParameters (src_infos->device, &device_entry->comPar);
+    /* has to wait for confirmation before setting DTI channel */
+    return;
+  }
+#ifdef DTI
+  /* request of a DTI channel to communicate with UART */
+  dti_cntrl_est_dpath_indirect ( src_infos->srcId,
+                                 entity_list,
+                                 1,
+                                 SPLIT,
+                                 atiUART_dti_cb,
+                                 DTI_CPBLTY_CMD,
+                                 DTI_CID_NOTPRESENT);
+#endif
+}
+/*
++-------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_DTIS                |
+|                                 ROUTINE : cmhUART_stopConnection  |
++-------------------------------------------------------------------+
+
+  PURPOSE : stop a DTI connection with UART.
+*/
+GLOBAL BOOL cmhUART_stopConnection (UBYTE srcId)
+{
+  T_ACI_DTI_PRC         *src_infos;
+
+  TRACE_FUNCTION ("cmhUART_stopConnection()");
+
+  src_infos = find_element (uart_src_params, (UBYTE)srcId, cmhUARTtest_srcId);
+  if (src_infos EQ NULL)
+  {
+    TRACE_EVENT_P1("[ERR] cmhUART_stopConnection: srcId=%d not found",
+                   srcId) ;
+    return (FALSE);
+  }
+
+  src_infos->LineState = LINE_DISCONNECTED;
+
+  if (cmhUART_ChangeDeviceType  (src_infos->srcId, DEVICE_TYPE_UNKNOWN))
+  {
+#ifdef DTI
+    if (dti_cntrl_close_dpath_from_src_id( srcId ))
+    {
+      return (TRUE);
+    }
+#endif
+  }
+  
+  return (FALSE);
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_UARTS                |
+| STATE   : code                  ROUTINE : sAT_PlusIPR              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +IPR AT command
+            which is responsible to set the data rate.
+*/
+
+GLOBAL void cmhUART_init_ipr_params(void)
+{  
+  TRACE_FUNCTION ("cmhUART_init_ipr_params()");
+  
+  uart_ipr_param.srcId = CMD_SRC_NONE;
+  uart_ipr_param.rate  = BD_RATE_NotPresent;
+}
+
+GLOBAL T_ACI_RETURN sAT_PlusIPR(T_ACI_CMD_SRC srcId, T_ACI_BD_RATE rate)
+{
+  ULONG ipr_timer = 0;
+
+  TRACE_FUNCTION ("sAT_PlusIPR()");
+
+  /* check command source */
+  if(srcId EQ CMD_SRC_LCL)
+  {
+    TRACE_ERROR("This command is not supported for local command source");
+    ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_OpNotSupp );
+    return AT_FAIL;
+  }
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    return AT_FAIL;
+  }
+
+  /* parameter check */
+  if ( rate < BD_RATE_AUTO OR rate > BD_RATE_115200 ) /* maximum supported value by UART */
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_OpNotSupp );
+    return AT_FAIL;
+  }
+
+  /* We need to sent the OK prior we switch to the new baudrate */
+  io_sendConfirm((UBYTE)srcId, cmdAtError(atOk), ATI_NORMAL_OUTPUT);
+  cmdErrStr = NULL;
+  
+  uart_ipr_param.rate  = rate;
+  uart_ipr_param.srcId = srcId;
+
+  ipr_timer = 600; /* worst case calculation: 4 characters:OK<CR><LF> at 75bit/s
+                      with 1 startbit, 1 paritybit and 1 stopbit (2 stopbits are only used for longer words)
+                      4*(8+1+1+1)= 44 bits => 44/75 seconds = 586 msec*/
+
+  /* time for output "OK" then send changed parameter to UART */
+  uartEntcurCmd[srcId] = AT_CMD_IPR;
+  TIMERSTART(ipr_timer, ACI_IPR);
+
+  return AT_CMPL;
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_UARTS                |
+| STATE   : code                  ROUTINE : timeout_PlusIPR          |
++--------------------------------------------------------------------+
+
+  PURPOSE : This function send the changed baudrate to UART after 
+            the timer ACI_IPR is expired
+*/
+
+GLOBAL void timeout_PlusIPR ( void)
+{  
+#ifdef FF_PSI
+  T_ACI_DTI_PRC_PSI *src_infos = find_element (psi_src_params, 
+                               (UBYTE)uart_ipr_param.srcId, cmhPSItest_srcId);
+#endif /*FF_PSI*/
+  TRACE_FUNCTION ("timeout_PlusIPR()");
+#ifdef FF_PSI
+  if ( src_infos NEQ NULL )
+  {
+     cmhPSI_SetDataRate((UBYTE)uart_ipr_param.srcId, uart_ipr_param.rate);
+  }
+  /* force parameter request */
+  else
+#endif /*FF_PSI*/
+     cmhUART_SetDataRate((UBYTE)uart_ipr_param.srcId, uart_ipr_param.rate);
+
+  cmhUART_init_ipr_params();
+  uartEntcurCmd[uart_ipr_param.srcId] = AT_CMD_NONE;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_UARTS                |
+| STATE   : code                  ROUTINE : qAT_PlusIPR              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +IPR? AT command
+            which returns the current setting for the data rate.
+
+*/
+GLOBAL T_ACI_RETURN qAT_PlusIPR   ( T_ACI_CMD_SRC  srcId, T_ACI_BD_RATE  *rate)
+{
+  T_ACI_DEVICE_ENTRY *device_entry = cmhUART_GetDeviceParOverSrcID( (UBYTE) srcId );
+#ifdef FF_PSI
+  T_ACI_DEVICE_DCB_ENTRY *device_dcb_entry;
+  U32 device_type;/* RM 26-05-04 Nice */
+#endif /*FF_PSI*/
+  TRACE_FUNCTION ("qAT_PlusIPR()");
+
+  if ( device_entry EQ NULL )
+  {
+#ifdef FF_PSI
+     device_dcb_entry = cmhPSI_GetDeviceParOverSrcID( (UBYTE) srcId );
+     if (device_dcb_entry EQ NULL)
+#endif /*FF_PSI*/
+        return AT_FAIL;
+#ifdef FF_PSI
+     else
+    {
+       device_type = device_dcb_entry->devId & DIO_TYPE_DAT_MASK;/* RM 26-05-04 Nice */
+       if (device_type EQ DIO_DATA_SER)/* RM 26-05-04 Nice */
+          *rate = (T_ACI_BD_RATE)device_dcb_entry->dcbPar.dio_dcb_ser.baudrate;
+       if (device_type EQ DIO_DATA_MUX)/* RM 26-05-04 Nice */
+          *rate = (T_ACI_BD_RATE)device_dcb_entry->dcbPar.dio_dcb_ser_mux.baudrate;
+      else  if (device_type EQ DIO_DATA_PKT)/* RM 26-05-04 Nice */
+          return AT_FAIL;
+       return( AT_CMPL );
+    }
+#endif /*FF_PSI*/
+  }
+/*
+ *-------------------------------------------------------------------
+ * fill in parameters
+ *-------------------------------------------------------------------
+ */
+  *rate = (T_ACI_BD_RATE) device_entry->comPar.speed;
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_UARTS                |
+| STATE   : code                  ROUTINE : sAT_PlusICF              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +ICF AT command
+            which is responsible to set the character framing.
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusICF   ( T_ACI_CMD_SRC    srcId,
+                                    T_ACI_BS_FRM     format,
+                                    T_ACI_BS_PAR     parity)
+{
+#ifdef FF_PSI
+  T_ACI_DTI_PRC_PSI *src_infos = find_element (psi_src_params,
+                                 (UBYTE) srcId, cmhPSItest_srcId);
+#endif /*FF_PSI*/
+  TRACE_FUNCTION ("sAT_PlusICF()");
+
+/*
+ *-------------------------------------------------------------------
+ * parameter check
+ *-------------------------------------------------------------------
+ */
+  switch( format )
+  {
+    case( BS_FRM_NotPresent ):
+    case( BS_FRM_Dat8_Par0_St2 ):
+    case( BS_FRM_Dat8_Par1_St1 ):
+    case( BS_FRM_Dat8_Par0_St1 ):
+    case( BS_FRM_Dat7_Par0_St2 ):
+    case( BS_FRM_Dat7_Par1_St1 ):
+    case( BS_FRM_Dat7_Par0_St1 ):
+
+      break;
+
+    default:
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+  switch( parity )
+  {
+    case( BS_PAR_NotPresent ):
+    case( BS_PAR_Odd ):
+    case( BS_PAR_Even ):
+    case( BS_PAR_Mark ):
+    case( BS_PAR_Space ):
+
+      break;
+
+    default:
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * force parameter request
+ *-------------------------------------------------------------------
+ */
+#ifdef FF_PSI
+  if ( src_infos NEQ NULL )
+  {
+     if ( AT_EXCT EQ cmhPSI_SetCharacterFraming((UBYTE) srcId, format, parity) )
+     {
+        uartEntcurCmd[srcId] = AT_CMD_ICF;
+        return AT_EXCT;
+     }
+  }
+  /* force parameter request */
+  else
+#endif /*FF_PSI*/
+  {
+    if ( AT_EXCT EQ cmhUART_SetCharacterFraming((UBYTE) srcId, format, parity) )
+    {
+      uartEntcurCmd[srcId] = AT_CMD_ICF;
+      return AT_EXCT;
+    }
+  }
+  return AT_FAIL;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_UARTS                |
+| STATE   : code                  ROUTINE : qAT_PlusICF              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +ICF? AT command
+            which returns the current setting for character framing.
+
+*/
+
+GLOBAL T_ACI_RETURN qAT_PlusICF   ( T_ACI_CMD_SRC    srcId,
+                                    T_ACI_BS_FRM    *format,
+                                    T_ACI_BS_PAR    *parity)
+{
+  T_ACI_DEVICE_ENTRY *device_entry = 
+                               cmhUART_GetDeviceParOverSrcID( (UBYTE) srcId );
+#ifdef  FF_PSI
+  T_ACI_DEVICE_DCB_ENTRY *device_dcb_entry = 
+                               cmhPSI_GetDeviceParOverSrcID( (UBYTE) srcId );
+#endif /*FF_PSI*/
+  TRACE_FUNCTION ("qAT_PlusICF()");
+#ifdef FF_PSI
+  if (device_entry EQ NULL AND device_dcb_entry EQ NULL)
+#else
+  if (device_entry EQ NULL)
+#endif /*FF_PSI*/
+  {
+      return AT_FAIL;
+  }
+#ifdef FF_PSI
+  if ( device_entry EQ NULL AND device_dcb_entry NEQ NULL )
+  {
+     *format = cmhPSI_GetFktInterfaceFormat(device_dcb_entry);
+     *parity = cmhPSI_GetFktInterfaceParity(device_dcb_entry);
+     return( AT_CMPL );
+  }
+#endif /*FF_PSI*/
+
+/*
+ *-------------------------------------------------------------------
+ * fill in parameters
+ *-------------------------------------------------------------------
+ */
+  /*lint -e613 (Warning --Possible use of null pointer) */
+  *format = cmhUART_GetFktInterfaceFormat(&(device_entry->comPar));
+  
+  *parity = cmhUART_GetFktInterfaceParity(&(device_entry->comPar));
+  /*lint +e613 (Warning --Possible use of null pointer) */
+  
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_UARTS                |
+| STATE   : code                  ROUTINE : sAT_PlusIFC              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +IFC AT command
+            which is responsible to set the flow control.
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusIFC   ( T_ACI_CMD_SRC  srcId,
+                                    T_ACI_RX_FLOW_CTRL DCE_by_DTE,
+                                    T_ACI_RX_FLOW_CTRL DTE_by_DCE   )
+{
+#ifdef FF_PSI
+  T_ACI_DTI_PRC_PSI *src_infos = find_element (psi_src_params, (UBYTE) srcId, cmhPSItest_srcId);
+#endif /*FF_PSI*/
+  T_ACI_RETURN result = AT_FAIL;
+  TRACE_FUNCTION ("sAT_PlusIFC()");
+
+/*
+ *-------------------------------------------------------------------
+ * parameter check
+ *-------------------------------------------------------------------
+ */
+  TRACE_EVENT_P2("sAT_PlusIFC: DCE_by_DTE=%d DTE_by_DCE=%d", DCE_by_DTE, DTE_by_DCE);
+
+  if ( DCE_by_DTE < RX_FLOW_NotPresent OR DCE_by_DTE > RX_FLOW_HARDWARE )
+  {
+    TRACE_EVENT("sAT_PlusIFC: err1");
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return AT_FAIL;
+  }
+
+  if ( DTE_by_DCE < RX_FLOW_NotPresent OR DTE_by_DCE > RX_FLOW_HARDWARE)
+  {
+    TRACE_EVENT("sAT_PlusIFC: err2");
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return AT_FAIL;
+  }
+
+  if ( DTE_by_DCE NEQ RX_FLOW_NotPresent AND DCE_by_DTE NEQ DTE_by_DCE )
+  {
+    TRACE_EVENT("sAT_PlusIFC: err3");
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return AT_FAIL;
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * force parameter request
+ *-------------------------------------------------------------------
+ */
+#ifdef FF_PSI
+ if (src_infos NEQ NULL)
+   result = cmhPSI_SetFlowControl((UBYTE) srcId, DCE_by_DTE);
+ else
+#endif /*FF_PSI*/
+   result = cmhUART_SetFlowControl((UBYTE) srcId, DCE_by_DTE);
+ switch (result)
+ {
+   case AT_EXCT:
+     uartEntcurCmd[srcId] = AT_CMD_IFC;
+     return AT_EXCT;
+   case AT_CMPL:
+     return AT_CMPL;
+ }
+ return result;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_UARTS                |
+| STATE   : code                  ROUTINE : qAT_PlusIFC              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +ICF? AT command
+            which returns the current setting for character framing.
+
+*/
+
+GLOBAL T_ACI_RETURN qAT_PlusIFC   ( T_ACI_CMD_SRC       srcId,
+                                    T_ACI_RX_FLOW_CTRL *DCE_by_DTE,
+                                    T_ACI_RX_FLOW_CTRL *DTE_by_DCE   )
+{
+  S32 flow_cntrl = RX_FLOW_NotPresent;
+  T_ACI_DEVICE_ENTRY *device_entry = cmhUART_GetDeviceParOverSrcID( (UBYTE) srcId );
+#ifdef FF_PSI
+  T_ACI_DEVICE_DCB_ENTRY *device_dcb_entry = NULL;
+  U32 device_type;/* RM 26-05-04 Nice */
+#endif /*FF_PSI*/
+  TRACE_FUNCTION ("qAT_PlusIFC()");
+
+  if ( device_entry EQ NULL )
+  {
+#ifdef FF_PSI
+    if ( (device_dcb_entry = cmhPSI_GetDeviceParOverSrcID( (UBYTE) srcId )) EQ NULL)
+#endif /*FF_PSI*/
+      return AT_FAIL;
+#ifdef FF_PSI
+    device_type = device_dcb_entry->devId & DIO_TYPE_DAT_MASK;/*  RM 26-05-04 Nice */
+    if (device_type EQ DIO_DATA_PKT)/* RM 26-05-04 Nice */
+      return AT_FAIL;
+   if (device_type EQ DIO_DATA_SER)/* RM 26-05-04 Nice */
+      flow_cntrl = device_dcb_entry->dcbPar.dio_dcb_ser.flow_control;
+   if (device_type EQ DIO_DATA_MUX)/* RM 26-05-04 Nice */
+      flow_cntrl = device_dcb_entry->dcbPar.dio_dcb_ser_mux.flow_control;
+
+    switch ( flow_cntrl )
+    {
+       case   (DIO_FLOW_NONE):
+       default:
+         *DCE_by_DTE = *DTE_by_DCE = RX_FLOW_NONE;
+         break;
+       case   (DIO_FLOW_XON_XOFF):
+         *DCE_by_DTE = *DTE_by_DCE = RX_FLOW_SOFTWARE;
+         break;
+       case  ( DIO_FLOW_RTS_CTS):
+         *DCE_by_DTE = *DTE_by_DCE = RX_FLOW_HARDWARE;
+         break;
+    }
+    return( AT_CMPL );
+#endif /*FF_PSI*/
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * fill in parameters
+ *-------------------------------------------------------------------
+ */
+  switch ( device_entry->comPar.flow_rx )
+  {
+    case UART_IO_FC_RX_NONE:
+    default:
+      *DCE_by_DTE = *DTE_by_DCE = RX_FLOW_NONE;
+      break;
+    case UART_IO_FC_RX_XOFF:
+      *DCE_by_DTE = *DTE_by_DCE = RX_FLOW_SOFTWARE;
+      break;
+    case UART_IO_FC_RX_RTS:
+      *DCE_by_DTE = *DTE_by_DCE = RX_FLOW_HARDWARE;
+      break;
+  }
+
+  return( AT_CMPL );
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_CCS                  |
+| STATE   : code                  ROUTINE : sAT_AndC                 |
++--------------------------------------------------------------------+
+
+  PURPOSE : set DCD behaviour
+*/
+
+GLOBAL T_ACI_RETURN sAT_AndC      ( T_ACI_CMD_SRC srcId,
+                                    T_ACI_DCD_MOD value )
+{
+  BOOL  no_data_call_on_this_line = TRUE;
+  UBYTE i;
+
+  TRACE_FUNCTION ("sAT_AndC()");
+
+  /* check command source */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    return( AT_FAIL );
+  }
+
+  /* check parameter value */
+  switch(value)
+  {
+    case(DCD_ALWAYS_ON):
+    case(DCD_DISABLE_AFTER_CALL):
+      break;
+    default:
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+  /* set DCD behaviour */
+  cmhPrm[srcId ].ccCmdPrm.DCDmode = value;
+
+  /* set DCD */
+  if(value EQ DCD_ALWAYS_ON)
+  {
+    io_setDCD (srcId, IO_DCD_ON);
+  }
+  else if(value EQ DCD_DISABLE_AFTER_CALL)
+  {
+    for (i = 0; i < MAX_CALL_NR; i++)
+    {
+      T_CC_CALL_TBL *ctbx = ccShrdPrm.ctb[i];
+
+      if (ctbx NEQ NULL AND
+          ctbx->curSrc EQ srcId)
+      {
+        switch(ctbx->BC[ctbx->curBC].bearer_serv)
+        {
+          case(MNCC_BEARER_SERV_NOT_PRES):
+          case(MNCC_BEARER_SERV_SPEECH):
+          case(MNCC_BEARER_SERV_AUX_SPEECH):
+            break;
+          default:
+            /* data call */
+            no_data_call_on_this_line = FALSE;
+            break;
+        }
+      }
+    }
+
+    if( no_data_call_on_this_line )
+    {
+      io_setDCD (srcId, IO_DCD_OFF);
+    }
+  }
+  return( AT_CMPL );
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_CCQ                  |
+| STATE   : code                  ROUTINE : qAT_AndC                 |
++--------------------------------------------------------------------+
+
+  PURPOSE : query DCD behaviour setting.
+*/
+
+GLOBAL T_ACI_RETURN qAT_AndC      ( T_ACI_CMD_SRC srcId,
+                                    T_ACI_DCD_MOD *value)
+{
+
+  TRACE_FUNCTION ("qAT_AndC()");
+
+  /* check command source */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    return( AT_FAIL );
+  }
+
+  /* check parameter value */
+  if( value EQ NULL )
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  /* query DCD behaviour */
+  *value = cmhPrm[srcId ].ccCmdPrm.DCDmode;
+
+  return( AT_CMPL );
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_UARTS                |
+| STATE   : code                  ROUTINE : sAT_AndD                 |
++--------------------------------------------------------------------+
+
+  PURPOSE : set DTR behaviour.
+*/
+
+GLOBAL T_ACI_RETURN sAT_AndD ( T_ACI_CMD_SRC srcId, UBYTE value)
+{
+#ifdef FF_PSI
+  T_ACI_DTI_PRC_PSI *dti_prc=find_element (psi_src_params, 
+                                         (UBYTE)srcId, cmhPSItest_srcId);
+#endif /*FF_PSI*/
+  TRACE_FUNCTION ("sAT_AndD()");
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    return( AT_FAIL );
+  }
+
+  switch( value )
+  {
+    case( DTR_BEHAVIOUR_Ignore ):
+    case( DTR_BEHAVIOUR_CommandMode ):
+    case( DTR_BEHAVIOUR_ClearCall ):
+#ifdef FF_PSI
+      if (dti_prc NEQ NULL)
+      {
+        psiShrdPrm.dtr_behaviour = (T_ACI_DTR_BEHAVIOUR)value;
+        TRACE_EVENT("device entry is in PSI");
+      }
+      else
+#endif /*FF_PSI*/
+      {
+        uartShrdPrm.dtr_behaviour = (T_ACI_DTR_BEHAVIOUR)value;
+        TRACE_EVENT("device entry is in UART");
+      }
+      break;
+
+    default:
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+  return( AT_CMPL );
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_UARTS                |
+| STATE   : code                  ROUTINE : qAT_AndD                 |
++--------------------------------------------------------------------+
+
+  PURPOSE : query DTR behaviour.
+*/
+
+GLOBAL T_ACI_RETURN qAT_AndD ( T_ACI_CMD_SRC srcId, UBYTE *value)
+{
+#ifdef FF_PSI
+  T_ACI_DTI_PRC_PSI *dti_prc=find_element (psi_src_params, (UBYTE)srcId, cmhPSItest_srcId);
+#endif /*FF_PSI*/
+  T_ACI_DTR_BEHAVIOUR dtr_behavior;
+  TRACE_FUNCTION ("qAT_AndD()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    return( AT_FAIL );
+  }
+#ifdef FF_PSI
+  if (dti_prc NEQ NULL)
+    dtr_behavior = psiShrdPrm.dtr_behaviour;
+  else 
+#endif /*FF_PSI*/
+    dtr_behavior = uartShrdPrm.dtr_behaviour;
+  switch( dtr_behavior )
+  {
+    case( DTR_BEHAVIOUR_Ignore ):
+    case( DTR_BEHAVIOUR_CommandMode ):
+    case( DTR_BEHAVIOUR_ClearCall ):
+      *value = dtr_behavior;
+      break;
+
+    default:
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+  return( AT_CMPL );
+}
+
+GLOBAL void cmhUART_lst_exit(void)
+{
+  T_ACI_LIST *src_infos = NULL;
+
+  while (1)
+  {
+    src_infos = (T_ACI_LIST *)remove_first_element (uart_src_params);
+
+    if (src_infos EQ NULL)
+    {
+      break;
+    }
+    ACI_MFREE (src_infos);
+    
+  }
+}
+#endif /* ifdef UART */