FreeCalypso > hg > freecalypso-citrine
view g23m-gsm/dl/cus_dl.h @ 0:75a11d740a02
initial import of gsm-fw from freecalypso-sw rev 1033:5ab737ac3ad7
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 09 Jun 2016 00:02:41 +0000 |
parents | |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Custom dependent definitions for DL of the | mobile station | | Use this header for definitions to integrate the | protocol stack entity DL in your target system ! +----------------------------------------------------------------------------- */ #ifndef CUS_DL_H #define CUS_DL_H /*==== CONSTANTS ==================================================*/ /* * TIMER_VALUES * * Description : The constants define the timer values * for the DL timer T200 depending on the various * channel types and service access point identifiers. * Value 1 means timeout, Value 0 means timer is stopped */ #define T200_ACTIVE 2 #define T200_EXPIRED 1 #define T200_STOPPED 0 #define T200_SDCCH_SAPI_0_CNT (T200_EXPIRED + 1) #define T200_FACCH_SAPI_0_CNT_FR (T200_EXPIRED + 9) #define T200_FACCH_SAPI_0_CNT_HR (T200_EXPIRED + 5) #define T200_SDCCH_SAPI_3_CNT (T200_EXPIRED + 3) #define T200_SACCH_SAPI_3_CNT (T200_EXPIRED + 4) /* * PRIMITIVE SIZES * * Description : The primitive size of PH_DATA_REQ depends on the * used channel. It is defined separately to achieve * an optimum of transmitted bytes to physical layer. * The default value which is defined here is calculated * without any alignment bits. * E.g. SACCH N201 = 18 * l1 header = 2 * l2 header = 3 * sdu offset = 2 * sdu length = 2 * ch_type = 1 * dummy = 1 * ----------------- * total = 29 * */ #define SACCH_PRIM_SIZE 29 #define SDCCH_PRIM_SIZE 29 #define FACCH_PRIM_SIZE 29 /* * MAX_QUEUED_MESSAGES * * Description : The constant define the maximum number of * stored layer 3 messages in data link layer. */ #define MAX_QUEUED_MESSAGES 10 /* * VERSION * * Description : The constants define the type and the value * of a version identification. The version * is part of the monitor struct. */ #define T_VERSION char #define VERSION_DL "DL 1.0" /* * VSI_CALLER * * Description : For multithread applications the constant VSI_CALLER * must be defined to identify the calling thread of the * VSI-Interface. This must be done correponding to the * type of T_VSI_CALLER in VSI.H. The comma symbol is * neccessary because the vsi-functions are called * like this vsi_xxx (VSI_CALLER par2, par3 ...) */ #if defined (NEW_FRAME) #define VSI_CALLER dl_handle, #define VSI_CALLER_SINGLE dl_handle #else #ifdef OPTION_MULTITHREAD #define VSI_CALLER DL_NAME, #define VSI_CALLER_SINGLE DL_NAME #else #define VSI_CALLER #define VSI_CALLER_SINGLE #endif #endif #endif