FreeCalypso > hg > freecalypso-citrine
view services/ffs/intelsbdrv.c @ 3:f93dab57b032
L1/include: TCS211-based version restored
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 09 Jun 2016 00:45:00 +0000 |
parents | 75a11d740a02 |
children |
line wrap: on
line source
/****************************************************************************** * Flash File System (ffs) * Idea, design and coding by Mads Meisner-Jensen, mmj@ti.com * * FFS AMD single bank low level flash driver RAM code * * $Id: intelsbdrv.c 1.13 Thu, 08 Jan 2004 15:05:23 +0100 tsj $ * ******************************************************************************/ #include "../../include/config.h" #include "ffs.h" #include "drv.h" #include "ffstrace.h" #include "intctl.h" #define INTEL_UNLOCK_SLOW 1 #undef tlw #define tlw(contents) #undef ttw #define ttw(contents) // Status bits for Intel flash memory devices #define INTEL_STATE_MACHINE_DONE (1<<7) #define FLASH_READ(addr) (*(volatile uint16 *) (addr)) #define FLASH_WRITE(addr, data) (*(volatile uint16 *) (addr)) = data /****************************************************************************** * INTEL Single Bank Driver Functions ******************************************************************************/ // Actually we should have disabled and enable the interrupts in this // function, but when the interrupt functions are used Target don't run! // Anyway, currently the interrupts are already disabled at this point thus // it does not cause any problems. int ffsdrv_ram_intel_sb_init(void) { uint32 i; volatile uint16 *addr; for (i = 0; i < dev.numblocks; i++) { addr = (volatile uint16 *) block2addr(i); *addr = 0x60; // Intel Config Setup *addr = 0xD0; // Intel Unlock Block *addr = 0xFF; // Intel Read Array } return 0; } void ffsdrv_ram_intel_sb_write_halfword(volatile uint16 *addr, uint16 value) { uint32 cpsr; ttw(ttr(TTrDrv, "wh(%x,%x)" NL, addr, value)); if (~*addr & value) { ttw(ttr(TTrFatal, "wh(%x,%x->%x) fatal" NL, addr, *addr, value)); return; } cpsr = int_disable(); tlw(led_on(LED_WRITE)); #if (INTEL_UNLOCK_SLOW == 1) *addr = 0x60; // Intel Config Setup *addr = 0xD0; // Intel Unlock Block #endif *addr = 0x50; // Intel Clear Status Register *addr = 0x40; // Intel program byte/word *addr = value; while ((*addr & 0x80) == 0) ; *addr = 0xFF; // Intel read array tlw(led_off(LED_WRITE)); int_enable(cpsr); } void ffsdrv_ram_intel_sb_erase(uint8 block) { volatile uint16 *addr; uint32 cpsr; uint16 poll; ttw(ttr(TTrDrvEra, "e(%d)" NL, block)); addr = (volatile uint16 *) block2addr(block); cpsr = int_disable(); tlw(led_on(LED_ERASE)); #if (INTEL_UNLOCK_SLOW == 1) *addr = 0x60; // Intel Config Setup *addr = 0xD0; // Intel Unlock Block #endif *addr = 0x50; // Intel Clear Status Register *addr = 0x20; // Intel Erase Setup *addr = 0xD0; // Intel Erase Confirm *addr = 0x70; // Intel Read Status Register // Wait for erase to finish. while ((*addr & 0x80) == 0) { tlw(led_toggle(LED_ERASE)); // Poll interrupts, taking interrupt mask into account. if (INT_REQUESTED) { // 1. suspend erase // 2. enable interrupts // .. now the interrupt code executes // 3. disable interrupts // 4. resume erase tlw(led_on(LED_ERASE_SUSPEND)); *addr = 0xB0; // Intel Erase Suspend *addr = 0x70; // Intel Read Status Register while (((poll = *addr) & 0x80) == 0) ; // If erase is complete, exit immediately if ((poll & 0x40) == 0) break; *addr = 0xFF; // Intel read array tlw(led_off(LED_ERASE_SUSPEND)); int_enable(cpsr); // Other interrupts and tasks run now... cpsr = int_disable(); tlw(led_on(LED_ERASE_SUSPEND)); *addr = 0xD0; // Intel erase resume // The following "extra" Read Status command is required because Intel has // changed the specification of the W30 flash! (See "1.8 Volt Intel® // Wireless Flash Memory with 3 Volt I/O 28F6408W30, 28F640W30, 28F320W30 // Specification Update") *addr = 0x70; // Intel Read Status Register tlw(led_off(LED_ERASE_SUSPEND)); } } *addr = 0xFF; // Intel read array tlw(led_on(LED_ERASE)); tlw(led_off(LED_ERASE)); int_enable(cpsr); }