annotate DUART-cable @ 29:6d7486db31cb

Quadband-ideas: Epcos M034F is also D1016
author Mychaela Falconia <falcon@freecalypso.org>
date Wed, 29 Jan 2020 23:59:50 +0000
parents f7ed8c45a8ec
children 78c2cc6ebbb8
Ignore whitespace changes - Everywhere: Within whitespace: At end of lines:
rev   line source
27
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
1 The Calypso chip has two UARTs, called MODEM and IrDA in the chip docs. The
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
2 primary UART (MODEM) has 4 signals (TxD, RxD, RTS and CTS), whereas the other
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
3 UART (IrDA) has data leads only (TxD and RxD). TI's C-Sample and D-Sample
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
4 boards have also established a convention whereby Calypso GPIOs 2 and 3 have
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
5 been assigned as supplementary modem control signals for the primary MODEM UART,
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
6 with GPIO 2 being an output from Calypso signaling DCD to the host and with
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
7 GPIO 3 being an input to Calypso receiving DTR from the host. Note that DSR
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
8 and RI are still missing in this arrangement.
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
9
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
10 In FreeCalypso we have further established our own convention: all FC hardware
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
11 products that bring out both Calypso UARTs do so by way of a single 10-pin (2x5)
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
12 2.54 mm header in a fixed pinout given below. This convention was started with
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
13 FCDEV3B, our first FC hw product, and is now being continued with MMTB1 and
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
14 other boards. Our standardized DUART header pinout is as follows:
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
15
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
16 Header pin Calypso signal
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
17 1 GND
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
18 2 GND
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
19 3 TX_IRDA
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
20 4 TX_MODEM
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
21 5 RX_IRDA
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
22 6 RX_MODEM
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
23 7 GPIO2_DCD
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
24 8 RTS_MODEM
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
25 9 GPIO3_DTR
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
26 10 CTS_MODEM
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
27
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
28 Pins 7 and 9 were originally left unused (they are unconnected on FCDEV3B), but
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
29 they have been assigned as DCD and DTR (from the host's perspective) starting
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
30 with MMTB1. Note that while DCD and DTR in the table above are named from the
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
31 host's perspective, all Calypso signals ending with _MODEM or _IRDA are from
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
32 the chip's perspective, i.e., the opposite.
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
33
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
34 Our standard recommended practice for connecting to our two UARTs from a regular
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
35 PC or laptop is to use FT2232D breakout boards from the following vendor:
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
36
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
37 http://pldkit.com/other/ft2232d-module
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
38
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
39 FT2232D is a versatile USB-to-various-things adapter, but in its default
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
40 configuration which we use here it acts as a bridge from USB to two UARTs,
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
41 presenting both UARTs behind a single USB device. The breakout board made and
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
42 sold by PLDkit has two rows of header pins, featuring 15 pins on each side, and
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
43 the two sides of the board neatly correspond to the A and B sides of FT2232D.
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
44
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
45 Our standard recommended method for connecting our two UARTs to a PLDkit FT2232D
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
46 board is to use a 10-wire ribbon cable that is custom-assembled as follows:
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
47
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
48 * One end is terminated with a 10-pin female connector that mates with the DUART
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
49 header on our modem boards;
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
50
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
51 * The other end is split into two parts as described below, and each split end
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
52 is terminated with a 15-pin female connector that mates with one side of the
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
53 FT2232D breakout board.
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
54
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
55 The split between A and B sides on the FT2232D end is not symmetric, instead 7
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
56 wires go to side A for the MODEM UART and 3 wires go to side B for the IrDA
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
57 UART. Assuming the standard color code, the 10-wire ribbon cable gets split
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
58 between violet and grey wires: brown to violet go to side A, grey to black go
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
59 to side B. After each wire has been stripped and fitted with a crimp-on female
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
60 terminal, FT2232D side A wires need to be inserted into the connector housing
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
61 as follows:
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
62
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
63 Wire Pin position FT2232D signal UART signal (host perspective)
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
64 brown 2 ADBUS0 TxD
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
65 red 3 ADBUS1 RxD
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
66 orange 4 ADBUS2 RTS
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
67 yellow 5 ADBUS3 CTS
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
68 green 6 ADBUS4 DTR
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
69 blue 8 ADBUS6 DCD
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
70 violet 15 GND GND
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
71
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
72 FT2232D side B wires need to be inserted into the other connector housing as
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
73 follows:
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
74
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
75 Wire Pin position FT2232D signal UART signal (host perspective)
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
76 grey 2 BDBUS0 TxD
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
77 white 3 BDBUS1 RxD
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
78 black 15 GND GND
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
79
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
80 The wires on the other end of the cable (also stripped and fitted with crimp-on
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
81 female terminals) need to be inserted into another connector housing that will
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
82 mate with the DUART connector on FreeCalypso modem boards; the pin assignment
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
83 is as follows:
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
84
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
85 Pin position Calypso signal Wire
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
86 1 GND black
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
87 2 GND violet
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
88 3 TX_IRDA white
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
89 4 TX_MODEM red
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
90 5 RX_IRDA grey
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
91 6 RX_MODEM brown
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
92 7 GPIO2_DCD blue
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
93 8 RTS_MODEM yellow
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
94 9 GPIO3_DTR green
f7ed8c45a8ec DUART-cable article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
95 10 CTS_MODEM orange