FreeCalypso > hg > freecalypso-docs

annotate FC-handset-spec @ 44:a415ae467c6d

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
FC-handset-spec: main keypad and its backlight documented
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 10 Jun 2021 18:10:35 +0000
parents e1b75668a706
children 9df8683daec4
Ignore whitespace changes - Everywhere: Within whitespace: At end of lines:
rev   line source
41
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
1 FreeCalypso Handset Specification
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
2 =================================
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
3
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
4 The purpose of this document is two-fold:
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
5
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
6 1) This document serves as the principal design specification for the
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
7 FreeCalypso Libre Dumbphone handset hardware which I, Mother Mychaela,
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
8 seek to build.
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
9
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
10 2) This document also defines the scope of functionality to be supported in
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
11 FreeCalypso handset firmware, including support for additional hardware
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
12 targets beyond the primary FC handset hw target.
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
13
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
14 1. FC handset hardware specification
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
15
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
16 1.1. Basic features
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
17
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
18 The Mother's goal is to produce a replacement for the proprietary Pirelli DP-L10
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
19 phone, or more specifically, for the GSM-only subset of this Pirelli phone which
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
20 the Mother actually uses, *without* Pirelli's key differentiating feature of
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
21 non-GSM WiFi operation, and without Pirelli's camera. The following hardware
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
22 features are to be included:
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
23
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
24 * 176x220 pixel color display (no touch)
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
25 * 21-button main keypad
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
26 * 3 side buttons for volume control and an auxiliary function
42
6b61d77f7700 FC-handset-spec: missed the loudspeaker and vibrator in 1.1
Mychaela Falconia <falcon@freecalypso.org>
parents: 41
diff changeset
27 * hands-free loudspeaker
6b61d77f7700 FC-handset-spec: missed the loudspeaker and vibrator in 1.1
Mychaela Falconia <falcon@freecalypso.org>
parents: 41
diff changeset
28 * vibrator
41
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
29 * USB port that combines charging and computer interface
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
30 * wired headset jack
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
31 * single SIM slot
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
32
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
33 The following features which are commonly found in mainstream proprietary
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
34 phones, particularly more recent ones, will NOT be included:
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
35
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
36 * camera
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
37 * Bluetooth
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
38 * FM radio
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
39 * TV receiver
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
40 * GPS receiver
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
41 * dual SIM slot
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
42 * torch light beyond LCD and keypad backlights
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
43
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
44 1.2. RF band capability
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
45
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
46 Our FC handset needs to be quadband GSM; this quadband capability will be
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
47 achieved by copying the RF section and the core PCB layout around it from the
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
48 reverse-engineered iWOW TR-800 modem module, which is itself a very direct
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
49 (almost verbatim) derivative of TI's Leonardo+ quadband reference design.
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
50
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
51 1.3. RAM and flash
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
52
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
53 The Mother's intent is to use Spansion S71PL064JA0 flash+RAM MCP on the final
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
54 handset motherboard, providing 8 MiB of flash and 2 MiB of XRAM in a 7x9 mm
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
55 footprint. This flash and RAM capacity is already known to be fully sufficient
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
56 for our FreeCalypso handset firmware in maximal feature configuration, hence
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
57 any larger capacity would be excessive. However, on our FC Venus development
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
58 board we may use the larger S71PL129NC0 MCP, same as used on FCDEV3B V2.
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
59
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
60 1.4. Liquid crystal display
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
61
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
62 1.4.1. Display size
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
63
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
64 The size of the display for our FC Libre Dumbphone handset design is fixed at
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
65 176x220 pixels, 16-bit color, following TI's D-Sample platform and the starting
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
66 point UI code that was developed for it. Thoughts of changing to a different
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
67 display size have been considered and rejected:
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
68
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
69 * If we were to change to a smaller display size, we would have to do extra work
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
70 on the firmware to shrink the UI to the smaller size, and we would reduce the
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
71 amount of information that can be displayed at once. We would incur extra
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
72 work and a functional loss, but gain absolutely nothing in return.
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
73
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
74 * If we were to change to a larger display size (240x320 pixels seems to be the
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
75 largest reasonable size for dumbphones, used in high-end Nokia models), we
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
76 would be venturing into uncertain territory - the greatest uncertainty would
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
77 be the extra CPU load on Calypso to draw the larger UI and to refresh the
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
78 larger framebuffer, which is done with PIO on Calypso, without any DMA
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
79 assistance. The D-Sample LCD size of 176x220 pixels already appears to be a
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
80 strain in some drawing code paths, hence the Mother's decision is to play it
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
81 safe and stick with the known working display size. Expanding the UI to make
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
82 sensible use of larger screen real estate would also entail additional work.
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
83
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
84 176x220 is the display size in pixels, and this resolution number by itself says
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
85 nothing about the physical display size in inches or mm. However, most readily
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
86 available LCDs that are made for this pixel resolution are made in 2.0" diagonal
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
87 physical size, with 31.68x39.60 mm active area and 0.180 mm dot pitch, hence
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
88 this physical size is the one we are going to use.
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
89
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
90 1.4.2. Specific LCD module selection
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
91
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
92 As of this writing, the specific LCD module to be used has not been firmly
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
93 selected yet. We are actively looking for an LCD module that fits all of the
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
94 following requirements:
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
95
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
96 * TFT color LCD, 2.0" diagonal, 176x220 pixel resolution;
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
97
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
98 * 16-bit microprocessor bus interface;
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
99
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
100 * 6:00 viewing direction as appropriate for cellular handsets;
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
101
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
102 * backlight consisting of 3 white LEDs in parallel, joined at the anode,
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
103 with separately brought-out cathodes;
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
104
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
105 * mechanical design that supports mounting with the FPC tail folded under the
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
106 module, either by way of direct solder termination (no connector) or by way
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
107 of raised sides that create sufficient vertical space to accommodate the FPC
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
108 connector.
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
109
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
110 The requirement of 16-bit microprocessor bus interface stems from the desire to
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
111 interface this LCD to the Calypso in exactly the same way how TI did it on the
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
112 D-Sample, the 6:00 viewing direction and mechanical mounting requirements stem
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
113 naturally from the target application (cellular phone handset), and the
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
114 backlight LED wiring requirement stems from the constraints of our chosen
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
115 MAX1916 backlight LED driver chip - see section 1.4.4.
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
116
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
117 1.4.3. Backlight and readability considerations
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
118
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
119 Out of the various pre-existing mobile phones which I (Mychaela) have
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
120 experienced, there have been 3 different kinds of LCDs in terms of how display
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
121 operation and readability interacts with the backlight:
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
122
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
123 1) older phones with black&white LCDs: on all phones of this type which I've
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
124 ever used, the display is perfectly readable without the backlight given
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
125 ordinary ambient lighting, be it natural daylight or room lighting. Such
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
126 LCDs are called reflective. With these B&W displays, you only need to turn
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
127 on the backlight if you need to operate the phone in darkness, such as
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
128 outdoors at night or inside with all lights off. The firmware in such phones
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
129 is typically designed to leave the actual display functional and updated at
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
130 all times, with only the backlight subject to on/off control.
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
131
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
132 2) most newer phones with color displays, of which Pirelli DP-L10 is a
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
133 representative case, have transmissive LCDs that are not designed to be
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
134 readable without the backlight at all - backlight required for readability
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
135 (BLRR) is another way to describe such LCDs. Because the display is not
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
136 readable at all without the backlight, phone firmware is typically designed
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
137 to turn off the entire display (not just the backlight) when the screen goes
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
138 dark, and operation visible to the user is display on/off, rather than
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
139 backlight on/off. It is a good firmware design practice to "swallow" the
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
140 initial keypress that turns on the display from dark state, i.e., to block
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
141 the regular action of whatever button was pressed to "wake up" the display.
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
142
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
143 3) The color display on Motorola C139 phones is an odd intermediate case: this
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
144 display is NOT practically readable with the backlight off, yet the firmware
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
145 is designed as if the display were readable in this condition: the actual
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
146 display (unsure if it is CSTN or TFT) remains on and updated, and when you
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
147 press some button to "wake up" the display, that button still takes its
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
148 regular action, which is really bad for usability. How do we know that the
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
149 actual CSTN or TFT display remains on and actively updated when it is not
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
150 readable with the backlight off? Answer: the non-backlit display can be made
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
151 readable by shining a flashlight directly at it - but this trick requires a
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
152 directly pointed flashlight; no amount of ordinary ambient light is enough
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
153 to make the display readable.
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
154
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
155 Because our FC Libre Dumbphone handset will have a color display (contemporary
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
156 TFT) and because we are sane, not copying the monumental design mistake of Mot
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
157 C139, our display will fall into class 2 by the above classification: backlight
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
158 required for readability, full display on/off rather than just backlight on/off,
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
159 firmware operating like Pirelli's in terms of wake-up keypress swallowing.
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
160
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
161 1.4.3.1. Backlight dimming mode
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
162
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
163 Because our LCD is of BLRR type and because we seek to fully replicate Pirelli's
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
164 logic in terms of when keypresses are swallowed and when they are not, we need
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
165 to implement a dimming mode for our LCD backlight. In Pirelli's design which we
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
166 are copying, when you are playing with phone menus or composing SMS etc, but are
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
167 not in an active call, the display switches between full brightness and totally
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
168 off - it goes fully off on timeout, and when you press a button to wake it up,
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
169 it switches on at full brightness, together with the keypad backlight. But when
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
170 you are in a call, when the timer expires (and it's a shorter timer, 10 s
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
171 instead of 30 s), the display goes dim instead of fully off, and in this dimmed
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
172 (but still readable) state keypresses are NOT swallowed.
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
173
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
174 We only need to implement two different intensity levels for the LCD backlight:
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
175 full brightness and in-call dimmed. The backlight intensity level in the dimmed
43
e1b75668a706 FC-handset-spec: grammar fix
Mychaela Falconia <falcon@freecalypso.org>
parents: 42
diff changeset
176 state will need to be chosen on this principle: use the lowest backlight LED
41
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
177 current (to conserve battery power and allow longest talk time on one charge) at
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
178 which the display is still readable, similarly to Pirelli's in-call dimmed
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
179 state.
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
180
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
181 In the user-actively-poking state, as opposed to the long-call dimmed state,
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
182 there is no need to provide different configurable backlight levels - see
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
183 section 1.4.5.
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
184
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
185 1.4.4. Backlight circuit implementation
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
186
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
187 In all candidate TFT LCD modules that are being considered (see section 1.4.2),
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
188 the backlight consists of 3 white LEDs wired in parallel, joined either at the
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
189 anode or at the cathode - although as we shall see momentarily, we require an
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
190 LCD module where the 3 LEDs are joined at the anode, with the 3 cathodes brought
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
191 out separately. LCD module datasheets call for 15 mA current through each LED
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
192 at maximum intensity, for 45 mA total, and the LED forward drop voltage (Vf) at
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
193 this rated current seems to range between 2.9 V (what I actually measured on one
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
194 candidate LCD module) to 3.2 V (what the datasheets list as typical) to perhaps
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
195 as high as 3.4 V (what one datasheet lists as the maximum).
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
196
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
197 Given the parallel (as opposed to series) wiring of the 3 LEDs and the
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
198 relatively low Vf, there is no need to use any kind of boost converter as part
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
199 of the LED driver circuit for this backlight - any boost converter will only add
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
200 inefficiency (more current will be drawn from the battery for the same LED
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
201 current), hence we need to avoid using such.
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
202
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
203 Regardless of whether a given phone design uses a boost converter or not (it
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
204 seems that older designs do use boost converters, either because older white
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
205 LEDs have higher Vf or because 2 or 3 LEDs are wired in series), all traditional
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
206 phone designs seem to share the quality where the display backlight brightness
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
207 remains the same as the battery discharges and as Vbat goes down - this quality
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
208 was directly observed on the Pirelli DP-L10 (unknown circuit design) and
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
209 inferred from the available schematics for Mot C139 and C155, with both of the
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
210 latter boost-converting to fixed 5.0 V. In our case, even though we choose to
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
211 not use a boost converter for efficiency reasons, we still need to achieve the
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
212 quality of the display brightness remaining the same through the discharge range
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
213 of our Li-ion battery - having the display dim in half as the battery discharges
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
214 from 4.2 V peak to 3.6-3.7 V plateau is simply not acceptable.
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
215
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
216 The simplest possible LED driving circuit would be one where a current limiting
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
217 resistor is inserted in series with each LED, and then the 3 parallel
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
218 LED+resistor sets are connected across battery terminals, with a transistor
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
219 inserted somewhere to act as the on/off switch. However, this trivial circuit
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
220 is not suitable in our application because it would produce unacceptably large
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
221 variation in display brightness as the battery discharges - hence we need a more
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
222 intelligent LED driving circuit. Our Luna LCD carrier board from the spring of
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
223 2020 features an LDO bringing Vbat down to fixed 3.5 V, followed by very low-
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
224 value resistors in series with each LED - but this approach is not good for
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
225 production either, as it makes the LED current extremely sensitive to any slight
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
226 variations in Vf.
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
227
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
228 Fortunately, I was able to find a specialized white LED driver chip that is just
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
229 perfect for our application, or more precisely, a specialized chip that acts as
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
230 a constant current sink for such LEDs - Maxim MAX1916, design from 2001, just
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
231 the right time frame for the kind of phone we are seeking to build. This
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
232 special chip takes the place of "dumb" ballast resistors: connect Vbat (battery
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
233 positive terminal) directly to the common anode of the 3 LEDs, but instead of
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
234 series resistors, connect each cathode to the corresponding LEDn pin of MAX1916
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
235 - *without* any resistors or transistors! FETs inside the MAX1916 take the
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
236 place of resistors as current-limiting elements, and the chip's global on/off
44
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
237 control (which will be driven with a Calypso GPIO) takes the place of a separate
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
238 switching transistor.
41
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
239
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
240 The special quality of MAX1916 is that it produces constant current through each
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
241 LED (based on a set reference current and 230x current multiplication circuit
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
242 inside the chip) regardless of variations in both Vbat and Vf! Of course the
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
243 requested current can only be sustained as long as Vbat >= Vf + Vds, where Vds
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
244 is the lowest drop voltage of the FETs inside MAX1916, and once Vbat falls below
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
245 this point, the LED current will begin to decline. However, the beauty of this
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
246 design is that no arbitrary artificial turnover points (like the 3.5 V point in
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
247 our hacky design from the spring of 2020) need to be set: the battery discharge
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
248 point at which the LED current begins to decline will be whatever it comes to be
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
249 naturally, based on Vf (perhaps depending on temperature) and MAX1916 Vds, and
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
250 the decline is expected to be gradual.
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
251
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
252 1.4.4.1. Backlight current selection and dimming
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
253
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
254 In the simplest MAX1916-based design, a fixed LED current is set by connecting
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
255 a resistor of appropriately computed value between MAX1916 SET pin and whatever
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
256 regulated fixed voltage rail happens to be available in the system. However,
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
257 in our application (see section 1.4.3.1) we need at least two different display
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
258 brightness levels, and thus at least two switchable LED currents. At first the
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
259 problem seems difficult, but an elegant solution has been found.
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
260
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
261 LCD backlight LED current will be selected by way of two Calypso GPIO pins
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
262 configured as outputs, and a 74LVC2G125 dual tristate buffer. Each tristate
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
263 buffer's A input will be tied high, and the two Calypso GPIO outputs will be
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
264 connected to buffer output enable inputs. There will be two resistors with
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
265 different carefully computed values, each connected between one of the two
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
266 tristate buffer outputs and MAX1916 SET pin. One resistor will provide a small
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
267 current, the other will provide a large current, and each of these two currents
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
268 will be switchable on/off by Calypso GPIO signals switching the buffer outputs
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
269 between driving high (2.7-2.8 V) and Hi-Z. Resistor values will be chosen such
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
270 that the sum of both currents will be the 15 mA limit (the current is reckoned
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
271 per LED), whereas the small current alone will be whatever we need for the
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
272 battery-saving long-call dimmed mode.
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
273
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
274 1.4.5. Slight regression relative to Pirelli DP-L10
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
275
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
276 The actual LCD backlight LED driving circuit inside the Pirelli phone is not
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
277 known, but reverse engineering of Pirelli's firmware followed by experimentation
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
278 reveals that backlight intensity variation is achieved via a form of PWM, using
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
279 Calypso PWL output - although PWL is used in an inverted sense, such that the
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
280 backlight intensity increases with more 0s being put out on PWL, as opposed to
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
281 more 1s. Thus regardless of the unknown actual circuit implementation, the
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
282 backlight intensity appears to be continuously variable from 1/255 to 255/255,
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
283 which is certainly a much richer control than our crude selection of just 3
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
284 possible LED currents.
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
285
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
286 In terms of what Pirelli's fw offers to end users, the backlight intensity in
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
287 the dimmed in-call state is always set to 1/255, without any way to change it,
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
288 whereas the backlight intensity in the active interaction state is selectable
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
289 via a menu among 5 levels; the 5 offered levels turn into 1/255, 64/255,
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
290 128/255, 192/255 and 255/255 in the resulting PWL programming.
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
291
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
292 So in terms of both hardware capabilities and end user offering via the
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
293 firmware, Pirelli's LCD backlight level control is richer than what we are
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
294 proposing for our FC Libre Dumbphone. However, engineering is all about
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
295 trade-offs and compromises, and in the Mother's opinion, this slight reduction
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
296 in the richness of functionality is sufficiently offset by the efficiency of
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
297 our MAX1916-based approach: aside from the theoretical possibility of a
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
298 switching buck converter, which I've never seen used for LED driving
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
299 applications, our choice of MAX1916 is the most battery-efficient way to drive
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
300 our backlight LEDs. Furthermore, when dimming is effected by switching the
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
301 actual regulated LED current, as in our case, as opposed to applying PWM, our
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
302 backlight becomes more resilient to even lower battery voltages.
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
303
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
304 Consider what happens when Vbat falls below the point at which the design-
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
305 intended LED current can be maintained - what happens then? If no PWM is
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
306 applied, or if PWM is set to maximum, then display brightness will be whatever
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
307 maximum is possible at this low battery voltage. But if PWM is applied,
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
308 especially very low duty cycles as in the case of Pirelli's dimmed state, then
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
309 the display that has already been dimmed by low Vbat will be *further* dimmed
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
310 by this aggressive PWM, likely producing an unreadable display at this point.
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
311 It may be possible to compensate via extra complexity in the firmware, by
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
312 turning PWM up when Vbat (as measured via Iota MADC) falls too low - but then
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
313 we would be getting really messy, whereas switching the regulated current is so
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
314 much more elegant. With our approach, low-battery-induced dimming in the "full
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
315 brightness" mode will happen at the same discharge point as it would if we had
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
316 used PWM (and set PWM to maximum in this "full brightness" mode), but in the
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
317 in-call dimmed state, further dimming due to low Vbat will probably happen at a
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
318 lower discharge point (if Vf decreases with decreasing current), and when it
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
319 does happen, there won't be a combination of both natural and artificially-
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
320 induced reductions, just the natural one.
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
321
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
322 Thus based on all of the above considerations, I feel justified in my design
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
323 choice of foregoing PWM control of backlight intensity in favor of fixed current
7d77aa76bcaa FC-handset-spec: beginning of massive document
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
324 switching with much more limited selection.
44
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
325
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
326 1.5. Main keypad
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
327
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
328 The main keypad on our FC Libre Dumbphone handset will have the following
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
329 21-button arrangement:
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
330
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
331 left soft key ^ right soft key
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
332 <O>
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
333 green call V red power/hang-up
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
334 button button
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
335
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
336 1 2 3
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
337 4 5 6
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
338 7 8 9
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
339 * 0 #
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
340
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
341 The top section above the traditional numeric dial buttons (12) consists of left
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
342 and right soft keys, green and red buttons (classically called SEND/END), and a
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
343 5-way navigation button group (left, right, up, down and center), for a total of
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
344 9 buttons in this section. The red hang-up button is also the hardware power-on
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
345 button; having the same button effect power-off when held down for some time is
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
346 a firmware function.
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
347
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
348 This 21-button main keypad arrangement is exactly the same as featured on
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
349 Motorola C1xx and Pirelli DP-L10 phones, on TI's D-Sample development platform,
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
350 and also on many other phones (non-Calypso) from the appropriate era, such as
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
351 Samsung E2232.
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
352
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
353 1.5.1. Keypad backlight
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
354
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
355 All traditional phones including Mot C1xx and Pirelli DP-L10 feature keypad
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
356 backlights, hence we need to include one as well. The exact structure of this
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
357 backlight won't be known until we enter the mechanical design phase for the
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
358 actual handset (as opposed to intermediate development boards), which will be
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
359 much later in the project, but the Mother's understanding is that keypad
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
360 backlights are made up of some number of LEDs (2 on Pirelli DP-L10, unknown
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
361 number on Mot C139) and some kind of light diffuser.
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
362
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
363 Given the discovery of MAX1916 constant-current-sink LED driver chip (see
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
364 section 1.4.4), the optimal electrical design of the keypad backlight becomes
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
365 clear: use 3 LEDs, and drive them using another MAX1916 chip, separate from the
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
366 one used for the LCD backlight.
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
367
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
368 Backlight intensity: neither Mot C139 nor Pirelli DP-L10 provides any way to
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
369 vary keypad backlight intensity, and no such variability is deemed necessary.
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
370 In the long-call state when the LCD backlight is dimmed, the keypad backlight
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
371 is fully off. We shall use a fixed LED current setting for our keypad
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
372 backlight, set with a single fixed resistor between the keypad MAX1916 chip's
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
373 SET pin and the V-IO rail, and the actual current value will be determined in a
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
374 much later phase of the project, when we have the actual keypad backlight LEDs
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
375 and a better idea of the mechanical design.
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
376
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
377 Backlight color: Mot C139 uses blue LEDs, Pirelli DP-L10 uses white LEDs.
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
378 Because blue and white LEDs have very similar electrical characteristics
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
379 (current needed for appropriate brightness, Vf at this current), the choice
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
380 between the two can be made in a much later project phase, based on input from
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
381 other team members who are better at aesthetics.
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
382
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
383 1.5.1.1. Comparison with Mot C139 and Pirelli DP-L10
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
384
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
385 Both of these two pre-existing reference phones feature keypad backlights that
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
386 are switched on/off via Iota LEDB; the actual circuit design is unknown.
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
387 However, in our design we forego Iota LEDB altogether (it won't be used for
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
388 anything), and use two MAX1916 chips for our LCD and keypad backlights, with
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
389 each chip's on/off control being a Calypso GPIO.
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
390
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
391 The actual workings of the LEDB driver or switch inside the Iota chip are a
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
392 mystery. On the one hand it appears to be nothing more than a "dumb" transistor
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
393 on/off switch, no different from an external "digital transistor" (BJT with bias
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
394 resistors) controlled by a Calypso GPIO: a resistor still seems to be required
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
395 for current control, and at least on the Pirelli DP-L10 the keypad backlight
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
396 intensity visibly varies with Vbat ranging over the Li-ion discharge range. But
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
397 on the other hand, LEDB requires the 13 MHz clock to be running, and the light
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
398 goes out when this clock is stopped. Why in the world would any kind of clock
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
399 be required if the circuit is only a transistor on/off switch controlled by a
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
400 static register bit? Other parts of TI's Iota datasheet describe its LEDA, LEDB
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
401 and LEDC as "current drivers" - but in the absence of any way to actually set
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
402 the desired current without depending on Vbat or Vf variations, whatever the
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
403 Iota chip actually provides can't be anything like MAX1916.
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
404
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
405 Poorly documented, non-understood mystery hardware is best avoided, hence we are
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
406 not going to use Iota LEDB, and shall only use MAX1916 instead. We also gain a
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
407 functional improvement over Pirelli DP-L10 by using MAX1916: our keypad
a415ae467c6d FC-handset-spec: main keypad and its backlight documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 43
diff changeset
408 backlight intensity will remain the same over the battery discharge range.