freecalypso-docs: FC-handset-spec annotate

annotate FC-handset-spec @ 75:c458b7159fbd

FC-handset-spec: add charging indicator LED

author	Mychaela Falconia <falcon@freecalypso.org>
date	Fri, 17 Sep 2021 18:31:08 +0000
parents	e4eebf9ffce3
children	04080501911d

rev	line source
41 7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	1 FreeCalypso Handset Specification
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	2 =================================
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	3
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	4 The purpose of this document is two-fold:
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	5
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	6 1) This document serves as the principal design specification for the
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	7 FreeCalypso Libre Dumbphone handset hardware which I, Mother Mychaela,
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	8 seek to build.
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	9
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	10 2) This document also defines the scope of functionality to be supported in
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	11 FreeCalypso handset firmware, including support for additional hardware
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	12 targets beyond the primary FC handset hw target.
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	13
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	14 1. FC handset hardware specification
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	15
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	16 1.1. Basic features
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	17
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	18 The Mother's goal is to produce a replacement for the proprietary Pirelli DP-L10
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	19 phone, or more specifically, for the GSM-only subset of this Pirelli phone which
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	20 the Mother actually uses, without Pirelli's key differentiating feature of
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	21 non-GSM WiFi operation, and without Pirelli's camera. The following hardware
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	22 features are to be included:
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	23
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	24 * 176x220 pixel color display (no touch)
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	25 * 21-button main keypad
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	26 * 3 side buttons for volume control and an auxiliary function
59 3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	27 * hands-free loudspeaker, also to be used for ringing
42 6b61d77f7700 FC-handset-spec: missed the loudspeaker and vibrator in 1.1 Mychaela Falconia <falcon@freecalypso.org> parents: 41 diff changeset	28 * vibrator
41 7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	29 * USB port that combines charging and computer interface
46 1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	30 * wired analog headset jack
41 7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	31 * single SIM slot
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	32
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	33 The following features which are commonly found in mainstream proprietary
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	34 phones, particularly more recent ones, will NOT be included:
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	35
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	36 * camera
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	37 * Bluetooth
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	38 * FM radio
58 e6a1d1699ebb FC-handset-spec: explicitly list stereo/music exclusion Mychaela Falconia <falcon@freecalypso.org> parents: 57 diff changeset	39 * MP3 or any other music player
e6a1d1699ebb FC-handset-spec: explicitly list stereo/music exclusion Mychaela Falconia <falcon@freecalypso.org> parents: 57 diff changeset	40 * stereo headphone output or any other beyond-voice audio
41 7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	41 * TV receiver
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	42 * GPS receiver
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	43 * dual SIM slot
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	44 * torch light beyond LCD and keypad backlights
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	45
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	46 1.2. RF band capability
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	47
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	48 Our FC handset needs to be quadband GSM; this quadband capability will be
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	49 achieved by copying the RF section and the core PCB layout around it from the
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	50 reverse-engineered iWOW TR-800 modem module, which is itself a very direct
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	51 (almost verbatim) derivative of TI's Leonardo+ quadband reference design.
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	52
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	53 1.3. RAM and flash
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	54
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	55 The Mother's intent is to use Spansion S71PL064JA0 flash+RAM MCP on the final
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	56 handset motherboard, providing 8 MiB of flash and 2 MiB of XRAM in a 7x9 mm
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	57 footprint. This flash and RAM capacity is already known to be fully sufficient
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	58 for our FreeCalypso handset firmware in maximal feature configuration, hence
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	59 any larger capacity would be excessive. However, on our FC Venus development
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	60 board we may use the larger S71PL129NC0 MCP, same as used on FCDEV3B V2.
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	61
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	62 1.4. Liquid crystal display
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	63
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	64 1.4.1. Display size
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	65
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	66 The size of the display for our FC Libre Dumbphone handset design is fixed at
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	67 176x220 pixels, 16-bit color, following TI's D-Sample platform and the starting
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	68 point UI code that was developed for it. Thoughts of changing to a different
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	69 display size have been considered and rejected:
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	70
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	71 * If we were to change to a smaller display size, we would have to do extra work
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	72 on the firmware to shrink the UI to the smaller size, and we would reduce the
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	73 amount of information that can be displayed at once. We would incur extra
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	74 work and a functional loss, but gain absolutely nothing in return.
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	75
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	76 * If we were to change to a larger display size (240x320 pixels seems to be the
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	77 largest reasonable size for dumbphones, used in high-end Nokia models), we
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	78 would be venturing into uncertain territory - the greatest uncertainty would
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	79 be the extra CPU load on Calypso to draw the larger UI and to refresh the
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	80 larger framebuffer, which is done with PIO on Calypso, without any DMA
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	81 assistance. The D-Sample LCD size of 176x220 pixels already appears to be a
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	82 strain in some drawing code paths, hence the Mother's decision is to play it
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	83 safe and stick with the known working display size. Expanding the UI to make
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	84 sensible use of larger screen real estate would also entail additional work.
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	85
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	86 176x220 is the display size in pixels, and this resolution number by itself says
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	87 nothing about the physical display size in inches or mm. However, most readily
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	88 available LCDs that are made for this pixel resolution are made in 2.0" diagonal
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	89 physical size, with 31.68x39.60 mm active area and 0.180 mm dot pitch, hence
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	90 this physical size is the one we are going to use.
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	91
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	92 1.4.2. Specific LCD module selection
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	93
73 eb68975e1b81 FC-handset-spec: KWH020ST23-F01 finalized Mychaela Falconia <falcon@freecalypso.org> parents: 69 diff changeset	94 Over the summer of 2021 we have selected Formike KWH020ST23-F01 as our LCD
eb68975e1b81 FC-handset-spec: KWH020ST23-F01 finalized Mychaela Falconia <falcon@freecalypso.org> parents: 69 diff changeset	95 module for FreeCalypso; in prior years we had evaluated two other LCD modules
eb68975e1b81 FC-handset-spec: KWH020ST23-F01 finalized Mychaela Falconia <falcon@freecalypso.org> parents: 69 diff changeset	96 from HaoRan and Startek. All relevant datasheets (our finally chosen LCD
eb68975e1b81 FC-handset-spec: KWH020ST23-F01 finalized Mychaela Falconia <falcon@freecalypso.org> parents: 69 diff changeset	97 module, our previous candidate LCD modules and the controller ICs inside these
eb68975e1b81 FC-handset-spec: KWH020ST23-F01 finalized Mychaela Falconia <falcon@freecalypso.org> parents: 69 diff changeset	98 modules) are collected here:
eb68975e1b81 FC-handset-spec: KWH020ST23-F01 finalized Mychaela Falconia <falcon@freecalypso.org> parents: 69 diff changeset	99
eb68975e1b81 FC-handset-spec: KWH020ST23-F01 finalized Mychaela Falconia <falcon@freecalypso.org> parents: 69 diff changeset	100 ftp://ftp.freecalypso.org/pub/embedded/LCDs/
eb68975e1b81 FC-handset-spec: KWH020ST23-F01 finalized Mychaela Falconia <falcon@freecalypso.org> parents: 69 diff changeset	101
eb68975e1b81 FC-handset-spec: KWH020ST23-F01 finalized Mychaela Falconia <falcon@freecalypso.org> parents: 69 diff changeset	102 Our LCD module selection criteria were as follows:
41 7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	103
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	104 * TFT color LCD, 2.0" diagonal, 176x220 pixel resolution;
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	105
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	106 * 16-bit microprocessor bus interface;
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	107
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	108 * 6:00 viewing direction as appropriate for cellular handsets;
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	109
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	110 * backlight consisting of 3 white LEDs in parallel, joined at the anode,
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	111 with separately brought-out cathodes;
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	112
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	113 * mechanical design that supports mounting with the FPC tail folded under the
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	114 module, either by way of direct solder termination (no connector) or by way
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	115 of raised sides that create sufficient vertical space to accommodate the FPC
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	116 connector.
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	117
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	118 The requirement of 16-bit microprocessor bus interface stems from the desire to
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	119 interface this LCD to the Calypso in exactly the same way how TI did it on the
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	120 D-Sample, the 6:00 viewing direction and mechanical mounting requirements stem
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	121 naturally from the target application (cellular phone handset), and the
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	122 backlight LED wiring requirement stems from the constraints of our chosen
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	123 MAX1916 backlight LED driver chip - see section 1.4.4.
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	124
67 ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	125 Formike KWH020ST23-F01 is an LCD module that was discovered by Mother Mychaela
73 eb68975e1b81 FC-handset-spec: KWH020ST23-F01 finalized Mychaela Falconia <falcon@freecalypso.org> parents: 69 diff changeset	126 in May-June of 2021, and it satisfies all of our requirements. In June of 2021
eb68975e1b81 FC-handset-spec: KWH020ST23-F01 finalized Mychaela Falconia <falcon@freecalypso.org> parents: 69 diff changeset	127 we received sample pieces, then we designed a test board for the purpose of
eb68975e1b81 FC-handset-spec: KWH020ST23-F01 finalized Mychaela Falconia <falcon@freecalypso.org> parents: 69 diff changeset	128 evaluating this new LCD, connecting it to our Luna interface from 2020. Our
eb68975e1b81 FC-handset-spec: KWH020ST23-F01 finalized Mychaela Falconia <falcon@freecalypso.org> parents: 69 diff changeset	129 lunalcd2 test board was finally assembled in August, all tests passed, and as
eb68975e1b81 FC-handset-spec: KWH020ST23-F01 finalized Mychaela Falconia <falcon@freecalypso.org> parents: 69 diff changeset	130 of September we are in process of ordering a larger batch of these finally
eb68975e1b81 FC-handset-spec: KWH020ST23-F01 finalized Mychaela Falconia <falcon@freecalypso.org> parents: 69 diff changeset	131 chosen Formike LCD modules.
67 ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	132
41 7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	133 1.4.3. Backlight and readability considerations
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	134
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	135 Out of the various pre-existing mobile phones which I (Mychaela) have
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	136 experienced, there have been 3 different kinds of LCDs in terms of how display
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	137 operation and readability interacts with the backlight:
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	138
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	139 1) older phones with black&white LCDs: on all phones of this type which I've
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	140 ever used, the display is perfectly readable without the backlight given
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	141 ordinary ambient lighting, be it natural daylight or room lighting. Such
54 138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	142 LCDs are called transflective: primarily reflective, but can also operate in
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	143 transmissive mode when the optional backlight is turned on. With these B&W
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	144 displays, you only need to turn on the backlight if you need to operate the
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	145 phone in darkness, such as outdoors at night or inside with all lights off.
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	146 The firmware in such phones is typically designed to leave the actual display
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	147 functional and updated at all times, with only the backlight subject to
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	148 on/off control.
41 7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	149
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	150 2) most newer phones with color displays, of which Pirelli DP-L10 is a
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	151 representative case, have transmissive LCDs that are not designed to be
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	152 readable without the backlight at all - backlight required for readability
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	153 (BLRR) is another way to describe such LCDs. Because the display is not
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	154 readable at all without the backlight, phone firmware is typically designed
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	155 to turn off the entire display (not just the backlight) when the screen goes
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	156 dark, and operation visible to the user is display on/off, rather than
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	157 backlight on/off. It is a good firmware design practice to "swallow" the
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	158 initial keypress that turns on the display from dark state, i.e., to block
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	159 the regular action of whatever button was pressed to "wake up" the display.
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	160
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	161 3) The color display on Motorola C139 phones is an odd intermediate case: this
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	162 display is NOT practically readable with the backlight off, yet the firmware
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	163 is designed as if the display were readable in this condition: the actual
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	164 display (unsure if it is CSTN or TFT) remains on and updated, and when you
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	165 press some button to "wake up" the display, that button still takes its
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	166 regular action, which is really bad for usability. How do we know that the
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	167 actual CSTN or TFT display remains on and actively updated when it is not
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	168 readable with the backlight off? Answer: the non-backlit display can be made
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	169 readable by shining a flashlight directly at it - but this trick requires a
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	170 directly pointed flashlight; no amount of ordinary ambient light is enough
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	171 to make the display readable.
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	172
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	173 Because our FC Libre Dumbphone handset will have a color display (contemporary
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	174 TFT) and because we are sane, not copying the monumental design mistake of Mot
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	175 C139, our display will fall into class 2 by the above classification: backlight
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	176 required for readability, full display on/off rather than just backlight on/off,
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	177 firmware operating like Pirelli's in terms of wake-up keypress swallowing.
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	178
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	179 1.4.3.1. Backlight dimming mode
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	180
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	181 Because our LCD is of BLRR type and because we seek to fully replicate Pirelli's
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	182 logic in terms of when keypresses are swallowed and when they are not, we need
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	183 to implement a dimming mode for our LCD backlight. In Pirelli's design which we
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	184 are copying, when you are playing with phone menus or composing SMS etc, but are
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	185 not in an active call, the display switches between full brightness and totally
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	186 off - it goes fully off on timeout, and when you press a button to wake it up,
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	187 it switches on at full brightness, together with the keypad backlight. But when
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	188 you are in a call, when the timer expires (and it's a shorter timer, 10 s
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	189 instead of 30 s), the display goes dim instead of fully off, and in this dimmed
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	190 (but still readable) state keypresses are NOT swallowed.
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	191
67 ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	192 In terms of absolute requirements, we only need to implement two different
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	193 intensity levels for the LCD backlight: full brightness and in-call dimmed.
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	194 The backlight intensity level in the dimmed state will need to be chosen on
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	195 this principle: use the lowest backlight LED current (to conserve battery power
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	196 and allow longest talk time on one charge) at which the display is still
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	197 readable, similarly to Pirelli's in-call dimmed state. In the user-actively-
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	198 poking state, as opposed to the long-call dimmed state, there is no strict need
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	199 to provide different configurable backlight levels - but it so happens that our
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	200 implementation will allow a total of 4 different backlight intensity levels -
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	201 see section 1.4.4.1.
41 7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	202
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	203 1.4.4. Backlight circuit implementation
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	204
73 eb68975e1b81 FC-handset-spec: KWH020ST23-F01 finalized Mychaela Falconia <falcon@freecalypso.org> parents: 69 diff changeset	205 In all candidate TFT LCD modules that have been considered (see section 1.4.2),
41 7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	206 the backlight consists of 3 white LEDs wired in parallel, joined either at the
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	207 anode or at the cathode - although as we shall see momentarily, we require an
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	208 LCD module where the 3 LEDs are joined at the anode, with the 3 cathodes brought
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	209 out separately. LCD module datasheets call for 15 mA current through each LED
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	210 at maximum intensity, for 45 mA total, and the LED forward drop voltage (Vf) at
74 e4eebf9ffce3 FC-handset-spec: Vf=2.9 V on both HaoRan and Formike LCD modules Mychaela Falconia <falcon@freecalypso.org> parents: 73 diff changeset	211 this rated current seems to range between 2.9 V (what I actually measured on
e4eebf9ffce3 FC-handset-spec: Vf=2.9 V on both HaoRan and Formike LCD modules Mychaela Falconia <falcon@freecalypso.org> parents: 73 diff changeset	212 both Formike and HaoRan LCD modules) to 3.2 V (what the datasheets list as
e4eebf9ffce3 FC-handset-spec: Vf=2.9 V on both HaoRan and Formike LCD modules Mychaela Falconia <falcon@freecalypso.org> parents: 73 diff changeset	213 typical) to perhaps as high as 3.4 V (what one datasheet lists as the maximum).
41 7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	214
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	215 Given the parallel (as opposed to series) wiring of the 3 LEDs and the
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	216 relatively low Vf, there is no need to use any kind of boost converter as part
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	217 of the LED driver circuit for this backlight - any boost converter will only add
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	218 inefficiency (more current will be drawn from the battery for the same LED
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	219 current), hence we need to avoid using such.
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	220
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	221 Regardless of whether a given phone design uses a boost converter or not (it
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	222 seems that older designs do use boost converters, either because older white
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	223 LEDs have higher Vf or because 2 or 3 LEDs are wired in series), all traditional
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	224 phone designs seem to share the quality where the display backlight brightness
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	225 remains the same as the battery discharges and as Vbat goes down - this quality
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	226 was directly observed on the Pirelli DP-L10 (unknown circuit design) and
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	227 inferred from the available schematics for Mot C139 and C155, with both of the
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	228 latter boost-converting to fixed 5.0 V. In our case, even though we choose to
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	229 not use a boost converter for efficiency reasons, we still need to achieve the
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	230 quality of the display brightness remaining the same through the discharge range
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	231 of our Li-ion battery - having the display dim in half as the battery discharges
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	232 from 4.2 V peak to 3.6-3.7 V plateau is simply not acceptable.
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	233
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	234 The simplest possible LED driving circuit would be one where a current limiting
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	235 resistor is inserted in series with each LED, and then the 3 parallel
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	236 LED+resistor sets are connected across battery terminals, with a transistor
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	237 inserted somewhere to act as the on/off switch. However, this trivial circuit
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	238 is not suitable in our application because it would produce unacceptably large
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	239 variation in display brightness as the battery discharges - hence we need a more
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	240 intelligent LED driving circuit. Our Luna LCD carrier board from the spring of
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	241 2020 features an LDO bringing Vbat down to fixed 3.5 V, followed by very low-
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	242 value resistors in series with each LED - but this approach is not good for
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	243 production either, as it makes the LED current extremely sensitive to any slight
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	244 variations in Vf.
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	245
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	246 Fortunately, I was able to find a specialized white LED driver chip that is just
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	247 perfect for our application, or more precisely, a specialized chip that acts as
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	248 a constant current sink for such LEDs - Maxim MAX1916, design from 2001, just
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	249 the right time frame for the kind of phone we are seeking to build. This
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	250 special chip takes the place of "dumb" ballast resistors: connect Vbat (battery
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	251 positive terminal) directly to the common anode of the 3 LEDs, but instead of
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	252 series resistors, connect each cathode to the corresponding LEDn pin of MAX1916
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	253 - without any resistors or transistors! FETs inside the MAX1916 take the
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	254 place of resistors as current-limiting elements, and the chip's global on/off
44 a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	255 control (which will be driven with a Calypso GPIO) takes the place of a separate
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	256 switching transistor.
41 7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	257
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	258 The special quality of MAX1916 is that it produces constant current through each
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	259 LED (based on a set reference current and 230x current multiplication circuit
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	260 inside the chip) regardless of variations in both Vbat and Vf! Of course the
67 ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	261 requested current can only be sustained as long as Vbat >= Vf + Vds_min, where
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	262 Vds_min is the lowest drop voltage of the FETs inside MAX1916, and once Vbat
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	263 falls below this point, the LED current will begin to decline. However, the
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	264 beauty of this design is that no arbitrary artificial turnover points (like the
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	265 3.5 V point in our hacky design from the spring of 2020) need to be set: the
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	266 battery discharge point at which the LED current begins to decline will be
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	267 whatever it comes to be naturally, based on Vf (perhaps depending on
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	268 temperature) and MAX1916 Vds_min, and the decline is expected to be gradual.
41 7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	269
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	270 1.4.4.1. Backlight current selection and dimming
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	271
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	272 In the simplest MAX1916-based design, a fixed LED current is set by connecting
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	273 a resistor of appropriately computed value between MAX1916 SET pin and whatever
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	274 regulated fixed voltage rail happens to be available in the system. However,
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	275 in our application (see section 1.4.3.1) we need at least two different display
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	276 brightness levels, and thus at least two switchable LED currents. At first the
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	277 problem seems difficult, but an elegant solution has been found.
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	278
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	279 LCD backlight LED current will be selected by way of two Calypso GPIO pins
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	280 configured as outputs, and a 74LVC2G125 dual tristate buffer. Each tristate
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	281 buffer's A input will be tied high, and the two Calypso GPIO outputs will be
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	282 connected to buffer output enable inputs. There will be two resistors with
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	283 different carefully computed values, each connected between one of the two
67 ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	284 tristate buffer outputs and MAX1916 SET pin. There will also be a third
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	285 resistor connected between MAX1916 SET pin and the V-IO rail.
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	286
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	287 The values of the 3 just-described resistors will be selected so that the path
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	288 through each SET resistor will add a different contribution to the total LED
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	289 current. The always-on SET resistor will provide the smallest current
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	290 corresponding to the long-call dimmed mode, whereas the sum of all 3
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	291 contribution currents will equal the 15 mA limit - the current is reckoned per
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	292 LED. The difference between the 15 mA maximum and the small dimmed mode current
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	293 will be split unequally between the two switched SET resistors, allowing a total
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	294 of 4 different backlight intensity levels to be selected via the two Calypso
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	295 GPIO outputs going to the 74LVC2G125 buffer's output enable inputs. The actual
73 eb68975e1b81 FC-handset-spec: KWH020ST23-F01 finalized Mychaela Falconia <falcon@freecalypso.org> parents: 69 diff changeset	296 currents will be determined after some further experimentation with our lunalcd2
eb68975e1b81 FC-handset-spec: KWH020ST23-F01 finalized Mychaela Falconia <falcon@freecalypso.org> parents: 69 diff changeset	297 test setup: this setup features our KWH020ST23-F01 LCD, a MAX1916-based
eb68975e1b81 FC-handset-spec: KWH020ST23-F01 finalized Mychaela Falconia <falcon@freecalypso.org> parents: 69 diff changeset	298 backlight circuit, and a DIP switch pack selecting the LED current in 1 mA
eb68975e1b81 FC-handset-spec: KWH020ST23-F01 finalized Mychaela Falconia <falcon@freecalypso.org> parents: 69 diff changeset	299 increments.
41 7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	300
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	301 1.4.5. Slight regression relative to Pirelli DP-L10
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	302
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	303 The actual LCD backlight LED driving circuit inside the Pirelli phone is not
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	304 known, but reverse engineering of Pirelli's firmware followed by experimentation
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	305 reveals that backlight intensity variation is achieved via a form of PWM, using
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	306 Calypso PWL output - although PWL is used in an inverted sense, such that the
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	307 backlight intensity increases with more 0s being put out on PWL, as opposed to
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	308 more 1s. Thus regardless of the unknown actual circuit implementation, the
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	309 backlight intensity appears to be continuously variable from 1/255 to 255/255,
67 ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	310 which is certainly a much richer control than our crude selection of just 4
41 7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	311 possible LED currents.
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	312
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	313 In terms of what Pirelli's fw offers to end users, the backlight intensity in
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	314 the dimmed in-call state is always set to 1/255, without any way to change it,
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	315 whereas the backlight intensity in the active interaction state is selectable
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	316 via a menu among 5 levels; the 5 offered levels turn into 1/255, 64/255,
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	317 128/255, 192/255 and 255/255 in the resulting PWL programming.
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	318
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	319 So in terms of both hardware capabilities and end user offering via the
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	320 firmware, Pirelli's LCD backlight level control is richer than what we are
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	321 proposing for our FC Libre Dumbphone. However, engineering is all about
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	322 trade-offs and compromises, and in the Mother's opinion, this slight reduction
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	323 in the richness of functionality is sufficiently offset by the efficiency of
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	324 our MAX1916-based approach: aside from the theoretical possibility of a
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	325 switching buck converter, which I've never seen used for LED driving
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	326 applications, our choice of MAX1916 is the most battery-efficient way to drive
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	327 our backlight LEDs. Furthermore, when dimming is effected by switching the
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	328 actual regulated LED current, as in our case, as opposed to applying PWM, our
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	329 backlight becomes more resilient to even lower battery voltages.
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	330
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	331 Consider what happens when Vbat falls below the point at which the design-
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	332 intended LED current can be maintained - what happens then? If no PWM is
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	333 applied, or if PWM is set to maximum, then display brightness will be whatever
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	334 maximum is possible at this low battery voltage. But if PWM is applied,
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	335 especially very low duty cycles as in the case of Pirelli's dimmed state, then
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	336 the display that has already been dimmed by low Vbat will be further dimmed
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	337 by this aggressive PWM, likely producing an unreadable display at this point.
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	338 It may be possible to compensate via extra complexity in the firmware, by
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	339 turning PWM up when Vbat (as measured via Iota MADC) falls too low - but then
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	340 we would be getting really messy, whereas switching the regulated current is so
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	341 much more elegant. With our approach, low-battery-induced dimming in the "full
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	342 brightness" mode will happen at the same discharge point as it would if we had
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	343 used PWM (and set PWM to maximum in this "full brightness" mode), but in the
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	344 in-call dimmed state, further dimming due to low Vbat will probably happen at a
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	345 lower discharge point (if Vf decreases with decreasing current), and when it
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	346 does happen, there won't be a combination of both natural and artificially-
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	347 induced reductions, just the natural one.
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	348
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	349 Thus based on all of the above considerations, I feel justified in my design
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	350 choice of foregoing PWM control of backlight intensity in favor of fixed current
7d77aa76bcaa FC-handset-spec: beginning of massive document Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	351 switching with much more limited selection.
44 a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	352
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	353 1.5. Main keypad
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	354
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	355 The main keypad on our FC Libre Dumbphone handset will have the following
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	356 21-button arrangement:
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	357
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	358 left soft key ^ right soft key
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	359 <O>
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	360 green call V red power/hang-up
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	361 button button
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	362
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	363 1 2 3
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	364 4 5 6
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	365 7 8 9
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	366 * 0 #
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	367
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	368 The top section above the traditional numeric dial buttons (12) consists of left
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	369 and right soft keys, green and red buttons (classically called SEND/END), and a
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	370 5-way navigation button group (left, right, up, down and center), for a total of
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	371 9 buttons in this section. The red hang-up button is also the hardware power-on
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	372 button; having the same button effect power-off when held down for some time is
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	373 a firmware function.
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	374
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	375 This 21-button main keypad arrangement is exactly the same as featured on
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	376 Motorola C1xx and Pirelli DP-L10 phones, on TI's D-Sample development platform,
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	377 and also on many other phones (non-Calypso) from the appropriate era, such as
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	378 Samsung E2232.
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	379
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	380 1.5.1. Keypad backlight
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	381
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	382 All traditional phones including Mot C1xx and Pirelli DP-L10 feature keypad
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	383 backlights, hence we need to include one as well. The exact structure of this
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	384 backlight won't be known until we enter the mechanical design phase for the
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	385 actual handset (as opposed to intermediate development boards), which will be
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	386 much later in the project, but the Mother's understanding is that keypad
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	387 backlights are made up of some number of LEDs (2 on Pirelli DP-L10, unknown
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	388 number on Mot C139) and some kind of light diffuser.
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	389
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	390 Given the discovery of MAX1916 constant-current-sink LED driver chip (see
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	391 section 1.4.4), the optimal electrical design of the keypad backlight becomes
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	392 clear: use 3 LEDs, and drive them using another MAX1916 chip, separate from the
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	393 one used for the LCD backlight.
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	394
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	395 Backlight intensity: neither Mot C139 nor Pirelli DP-L10 provides any way to
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	396 vary keypad backlight intensity, and no such variability is deemed necessary.
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	397 In the long-call state when the LCD backlight is dimmed, the keypad backlight
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	398 is fully off. We shall use a fixed LED current setting for our keypad
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	399 backlight, set with a single fixed resistor between the keypad MAX1916 chip's
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	400 SET pin and the V-IO rail, and the actual current value will be determined in a
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	401 much later phase of the project, when we have the actual keypad backlight LEDs
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	402 and a better idea of the mechanical design.
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	403
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	404 Backlight color: Mot C139 uses blue LEDs, Pirelli DP-L10 uses white LEDs.
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	405 Because blue and white LEDs have very similar electrical characteristics
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	406 (current needed for appropriate brightness, Vf at this current), the choice
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	407 between the two can be made in a much later project phase, based on input from
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	408 other team members who are better at aesthetics.
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	409
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	410 1.5.1.1. Comparison with Mot C139 and Pirelli DP-L10
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	411
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	412 Both of these two pre-existing reference phones feature keypad backlights that
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	413 are switched on/off via Iota LEDB; the actual circuit design is unknown.
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	414 However, in our design we forego Iota LEDB altogether (it won't be used for
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	415 anything), and use two MAX1916 chips for our LCD and keypad backlights, with
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	416 each chip's on/off control being a Calypso GPIO.
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	417
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	418 The actual workings of the LEDB driver or switch inside the Iota chip are a
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	419 mystery. On the one hand it appears to be nothing more than a "dumb" transistor
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	420 on/off switch, no different from an external "digital transistor" (BJT with bias
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	421 resistors) controlled by a Calypso GPIO: a resistor still seems to be required
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	422 for current control, and at least on the Pirelli DP-L10 the keypad backlight
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	423 intensity visibly varies with Vbat ranging over the Li-ion discharge range. But
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	424 on the other hand, LEDB requires the 13 MHz clock to be running, and the light
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	425 goes out when this clock is stopped. Why in the world would any kind of clock
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	426 be required if the circuit is only a transistor on/off switch controlled by a
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	427 static register bit? Other parts of TI's Iota datasheet describe its LEDA, LEDB
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	428 and LEDC as "current drivers" - but in the absence of any way to actually set
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	429 the desired current without depending on Vbat or Vf variations, whatever the
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	430 Iota chip actually provides can't be anything like MAX1916.
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	431
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	432 Poorly documented, non-understood mystery hardware is best avoided, hence we are
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	433 not going to use Iota LEDB, and shall only use MAX1916 instead. We also gain a
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	434 functional improvement over Pirelli DP-L10 by using MAX1916: our keypad
a415ae467c6d FC-handset-spec: main keypad and its backlight documented Mychaela Falconia <falcon@freecalypso.org> parents: 43 diff changeset	435 backlight intensity will remain the same over the battery discharge range.
45 9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	436
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	437 1.6. Side buttons
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	438
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	439 In addition to the 21-button main keypad, our FC Libre Dumbphone handset will
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	440 include 3 side buttons: two on the left side, intended for volume up/down
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	441 control, and one on the right side, serving auxiliary functions. This side
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	442 button arrangement is identical to TI's D-Sample and similar to Pirelli DP-L10:
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	443 the only difference between our arrangement (matching D-Sample) and Pirelli's
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	444 is that Pirelli moved the 3rd side button to the left and designated it as the
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	445 camera button. However, we (FreeCalypso) have no interest in ever implementing
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	446 any kind of camera on our phones, hence we are moving the 3rd side button back
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	447 to where it was in TI's original design (on the right), and we will use it for
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	448 purposes of our own invention.
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	449
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	450 The starting point UI code we got from TI does not do anything with the right
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	451 side button (even though this button exists and works on the D-Sample platform
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	452 on which this code was originally developed), hence we have full freedom to
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	453 invent our own uses for it. The following uses are envisioned:
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	454
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	455 * Long press of this button may be our way of turning the hands-free loudspeaker
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	456 on and off, a function that does not exist in the starting point UI code from
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	457 TI.
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	458
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	459 * When the phone is in its normal idle standby operation (not in a call and not
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	460 being poked at by the user, but registered to a GSM network and ready to
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	461 accept incoming calls or SMS), the display will be off. Users often desire
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	462 to check the time and other status (check coverage, see if they missed any
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	463 calls or SMS), which will require pressing any button to turn on the display.
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	464 At that point a 30 s timer kicks in, which will turn the display back off
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	465 after 30 s of inactivity. However, an argument can be made that keeping the
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	466 display on for 30 s if the user only wanted to quickly glance at the time is
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	467 a waste of battery. Here is one proposed solution: we can implement a
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	468 function where a short press of the right side button when the phone is on its
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	469 idle screen will cause the display to turn off immediately and activate the
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	470 keyguard. The user can then press the right side button once to turn on the
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	471 display and look at it, and then press the same button again to turn it back
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	472 off.
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	473
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	474 * When we are in a long call, the LCD backlight does not turn off completely,
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	475 instead it will go dim - but still readable. Any button presses in this state
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	476 are NOT swallowed - they take their regular actions. However, the keypad
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	477 backlight turns off fully in this state, and under certain conditions (like
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	478 out at night) the user may not be able to see the keypad. If a short press
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	479 of the right side button invokes no other action besides switching on full
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	480 display brightness and the keypad backlight, this right side button can be
9df8683daec4 FC-handset-spec: side buttons documented Mychaela Falconia <falcon@freecalypso.org> parents: 44 diff changeset	481 found by touch, and thus solve this particular problem case.
46 1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	482
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	483 1.7. Audio routing
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	484
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	485 3 different audio routing modes will be supported on our FC Libre Dumbphone
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	486 handset:
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	487
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	488 * Default mode: there will be a 32 ohm earpiece speaker physically mounted in
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	489 the usual place, on the front bezel above the display, to match up with the
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	490 user's ear in handheld operation. There will also be a microphone toward the
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	491 front bottom of the phone, again in the usual place.
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	492
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	493 * Hands-free mode: there will be an 8 ohm loudspeaker physically separate from
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	494 the 32 ohm earpiece speaker, physical location in the handset TBD. In the
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	495 hands-free mode, the downlink audio will be switched from the earpiece speaker
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	496 to the loudspeaker, while the microphone input for the uplink will remain the
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	497 same.
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	498
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	499 * There will be a wired analog headset jack with plug insertion detection; when
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	500 a headset is inserted, both audio input and output will be redirected to this
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	501 headset interface.
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	502
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	503 1.7.1. Earpiece and loudspeaker separation
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	504
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	505 Most current mainstream phones (in fact, all that I am familiar with) have
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	506 physically separate speaker transducers for the earpiece function (hold up to
64 6b02de926277 FC-handset-spec section 1.7.1: mention Pirelli DP-L10 Mychaela Falconia <falcon@freecalypso.org> parents: 63 diff changeset	507 ear to talk) and the loudspeaker+ringer function. The not-so-current and not-
6b02de926277 FC-handset-spec section 1.7.1: mention Pirelli DP-L10 Mychaela Falconia <falcon@freecalypso.org> parents: 63 diff changeset	508 so-mainstream Pirelli DP-L10 also features the same arrangement. The earpiece
6b02de926277 FC-handset-spec section 1.7.1: mention Pirelli DP-L10 Mychaela Falconia <falcon@freecalypso.org> parents: 63 diff changeset	509 speaker is a 32 ohm load, and the loudspeaker is an 8 ohm load. In a
6b02de926277 FC-handset-spec section 1.7.1: mention Pirelli DP-L10 Mychaela Falconia <falcon@freecalypso.org> parents: 63 diff changeset	510 Calypso+Iota design, an external amplifier chip is needed to drive the 8 ohm
6b02de926277 FC-handset-spec section 1.7.1: mention Pirelli DP-L10 Mychaela Falconia <falcon@freecalypso.org> parents: 63 diff changeset	511 loudspeaker, whereas the little 32 ohm earpiece speaker can be driven directly
6b02de926277 FC-handset-spec section 1.7.1: mention Pirelli DP-L10 Mychaela Falconia <falcon@freecalypso.org> parents: 63 diff changeset	512 by Iota EAR output.
46 1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	513
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	514 However, a very different design was implemented by TI on their D-Sample and
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	515 Leonardo boards. They have only one speaker, one of 8 ohm kind, that is
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	516 physically mounted in the position where the earpiece speaker would normally go.
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	517 In order to not overwhelm the user's ear in handheld operation, they have
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	518 peculiar circuit wiring where the analog signal from Iota to the loudspeaker
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	519 amplifier goes through different resistor values depending on whether EAR or AUX
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	520 output from Iota is used, and when the EAR output is selected, the high resistor
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	521 values produce attenuation, such that the sound pressure level produced by the
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	522 pressed-to-ear loudspeaker becomes comparable to that produced by a more
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	523 traditional 32 ohm earpiece speaker.
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	524
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	525 Furthermore, TI's single speaker design was not limited to their development
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	526 boards. Some years ago I found schematics for some very old LG phone (called
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	527 A316 or B1200, not sure of the correct designation), this phone is from early
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	528 TI era (pre-Calypso, using Ulysse/Nausica/Clara chipset), and it has the same
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	529 arrangement as D-Sample and Leonardo.
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	530
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	531 For our own FC Libre Dumbphone, I am going with the separate speakers
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	532 architecture, using physically separate earpiece and loudspeaker transducers.
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	533 This architecture feels more native to me, and it will allow for independent
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	534 tuning of the two audio paths. In my defense, all current mainstream phones
64 6b02de926277 FC-handset-spec section 1.7.1: mention Pirelli DP-L10 Mychaela Falconia <falcon@freecalypso.org> parents: 63 diff changeset	535 seem to use the same architecture, and so does the Pirelli phone that serves as
6b02de926277 FC-handset-spec section 1.7.1: mention Pirelli DP-L10 Mychaela Falconia <falcon@freecalypso.org> parents: 63 diff changeset	536 my personal reference - the other approach with a single loudspeaker in the
6b02de926277 FC-handset-spec section 1.7.1: mention Pirelli DP-L10 Mychaela Falconia <falcon@freecalypso.org> parents: 63 diff changeset	537 earpiece physical position seems very uncommon.
46 1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	538
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	539 1.7.2. Loudspeaker implementation
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	540
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	541 The external amplifier chip for driving the 8 ohm loudspeaker will be TI
65 153b517ccc7a FC-handset-spec section 1.7.2: make contrast with MIDI ringtone chips Mychaela Falconia <falcon@freecalypso.org> parents: 64 diff changeset	542 TPA6203A1, copied from Leonardo schematics and proven good on FCDEV3B. It is a
153b517ccc7a FC-handset-spec section 1.7.2: make contrast with MIDI ringtone chips Mychaela Falconia <falcon@freecalypso.org> parents: 64 diff changeset	543 "dumb" loudspeaker amplifier, as opposed to a much more complex chip that
153b517ccc7a FC-handset-spec section 1.7.2: make contrast with MIDI ringtone chips Mychaela Falconia <falcon@freecalypso.org> parents: 64 diff changeset	544 combines the loudspeaker amplifier function with a MIDI ringtone player - see
153b517ccc7a FC-handset-spec section 1.7.2: make contrast with MIDI ringtone chips Mychaela Falconia <falcon@freecalypso.org> parents: 64 diff changeset	545 section 1.8. On FCDEV3B this amplifier is fed with signal from Iota EAR output,
153b517ccc7a FC-handset-spec section 1.7.2: make contrast with MIDI ringtone chips Mychaela Falconia <falcon@freecalypso.org> parents: 64 diff changeset	546 but on the final handset and on the Venus development board this amplifier will
153b517ccc7a FC-handset-spec section 1.7.2: make contrast with MIDI ringtone chips Mychaela Falconia <falcon@freecalypso.org> parents: 64 diff changeset	547 be fed with signal from Iota AUX output instead.
46 1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	548
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	549 The loudspeaker amplifier has an on/off control by way of a Calypso GPIO; in
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	550 order to save battery, this amplifier needs to be off normally, and only turn on
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	551 when a loudspeaker call is in progress or when a ringtone melody is played.
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	552
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	553 1.7.3. Wired analog headset jack
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	554
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	555 The analog headset jack on our FC Libre Dumbphone handset will be of 2.5 mm
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	556 TRRS type, using pinout copied from iWOW DSK. The headset needs to be wired as
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	557 follows:
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	558
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	559 * 32 ohm earpiece speaker connected between Tip and Ring2;
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	560 * electret condenser microphone, positive connected to Ring1;
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	561 * Sleeve is ground, should be needed only for the microphone.
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	562
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	563 The advantage of this TRRS headset specification, as opposed to the simpler kind
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	564 with a TRS plug and a common ground for the earpiece and the mic, is that our
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	565 TRRS headset can be driven with either single-ended or differential earpiece
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	566 driver outputs. On the final handset, the wired headset interface will be
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	567 connected to the Iota headset channel (HSMICBIAS, HSMICP, HSO) and thus the
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	568 headset earpiece driver will be single-ended (HSO and GND), but the same headset
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	569 can also be plugged into other FreeCalypso devices in which the jack is wired
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	570 to the main Iota audio channel, with Iota EARP & EARN driving Tip and Ring2 on
1fec0a3f09cc FC-handset-spec: audio routing documented Mychaela Falconia <falcon@freecalypso.org> parents: 45 diff changeset	571 the TRRS headset jack.
47 f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	572
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	573 1.8. Ringtone generation
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	574
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	575 In terms of the physical sound-emitting element, there are two principal ways
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	576 in which cellphone ringing sounds can be produced:
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	577
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	578 1) The oldest and most classic way is to use a magnetic buzzer controlled by
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	579 Calypso BU/PWT digital output. The buzzer is driven with raw battery voltage
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	580 being switched with a "digital transistor" (BJT with bias resistors), and the
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	581 control input going to the base of the BJT is Calypso BU/PWT output. This
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	582 method is standard in older phones that don't have hands-free loudspeakers:
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	583 since there is no loudspeaker for that other purpose, some loud noise-making
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	584 element needs to be implemented just for ringing, and old-style buzzers are
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	585 the traditional choice. Motorola C1xx lower subfamilies (C11x/12x and
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	586 C139/140) use such buzzers for ringing.
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	587
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	588 2) In phones that feature a loudspeaker for hands-free operation, the same
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	589 loudspeaker is also used for ringtone sounding, and the buzzer is eliminated.
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	590 Apparently hands-free loudspeakers weren't popular in the Calypso era, thus
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	591 Pirelli DP-L10 is the only known Calypso phone that features one. There is
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	592 also a more bizarre possibility: some phones have replaced the ringing buzzer
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	593 with a loudspeaker, but that speaker is used only for playing ringtone
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	594 melodies - no hands-free call feature is offered. This situation exists on
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	595 Motorola C155/156 phones.
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	596
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	597 Furthermore, if the physical sound-emitting element is a loudspeaker and not an
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	598 old-fashioned buzzer, and if the chipset is Calypso, as opposed to various newer
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	599 chipsets, then a further distinction arises:
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	600
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	601 2a) Most historical commercial phones that are based on Calypso and use a
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	602 loudspeaker for ringtone sounding, also contain a special ringtone generator
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	603 chip that drives this speaker when a ringtone is played - in other words,
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	604 their loudspeaker ringtones do NOT go through the same voice audio path that
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	605 is used for hands-free calls, if the latter feature is offered at all. The
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	606 speciai ringtone generator chip is typically a combined MIDI player and
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	607 loudspeaker driver.
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	608
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	609 2b) The much less popular approach is to not implement any extra hardware at all
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	610 that is specifically for ringtone generation, use only the same loudspeaker
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	611 audio path hardware that is already needed for hands-free calls (a simple
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	612 loudspeaker amplifier), generate ringtone melodies in the Calypso DSP
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	613 (Melody E1 or E2), and play them through the regular voice audio path,
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	614 routed to the loudspeaker.
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	615
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	616 Approach 2b is the least popular one among historical commercial Calypso phones,
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	617 but it is the one which I (Mother Mychaela) have selected for our FC Libre
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	618 Dumbphone handset. But let us nonetheless examine the pros and cons of
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	619 different approaches, and see why I have settled on option 2b.
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	620
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	621 Buzzer melodies (option 1) are monophonic (the signal carrying the melody to
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	622 the buzzer is a digital square wave, and there is no way to create multiple
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	623 overlapping notes in such a signal), but a decent range of tone frequencies is
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	624 available: the magnetic buzzer hardware can easily produce frequencies all the
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	625 way up to the limit of human hearing, while Calypso PWT produces musical notes
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	626 from F4 through E8 in the scientific pitch notation, or 349 to 5274 Hz. In
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	627 contrast, any tones produced through the 8000 samples/s voice audio path have
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	628 to be below the Nyquist frequency of 4 kHz - according to TI's document, Melody
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	629 E1 notes go from E4 (330 Hz) up to G#7 or 3322 Hz.
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	630
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	631 In terms of the richness of possible ringtone melodies that can be played,
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	632 option 2a (external MIDI player chip that drives the loudspeaker directly,
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	633 without going through Calypso+Iota voice audio path) is the absolute best.
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	634 These specialized ringtone generator chips implement full MIDI (128 instruments,
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	635 47 drums, up to 64 simultaneous notes, according to one datasheet), and the
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	636 available ringtone melodies for these MIDI chips are very rich - just take a
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	637 Pirelli DP-L10 phone and listen through various ringtone melodies it offers.
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	638 All of Pirelli's melodies are stored as *.mid files in their FFS, thus we could
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	639 very easily copy them if we were to adopt a MIDI player chip similar to theirs.
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	640
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	641 However, the problem for us with adopting option 2a is that this option would
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	642 introduce significant extra complexity and adversely affect our already long-
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	643 overdue project schedule. There is only one MIDI ringtone player chip for which
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	644 we have enough documentation to attempt such a feat: this chip is Winbond
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	645 W56964, a slightly more capable sibling of the W56940 used in the Pirelli phone.
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	646 However, just because we have what at first glance appears to be reasonably
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	647 complete documentation does not mean that it would be a slam dunk! We would
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	648 have to build a separate test board for this chip, connect it to a Caramel2
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	649 motherboard (it needs to connect to Calypso MEMIF), and then spend significant
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	650 time climbing the learning curve and getting this chip to actually work: getting
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	651 it to play melodies, and just as important, getting it into and out of sleep
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	652 modes. In other words, a lot of extra work and time spent just for this part,
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	653 not advancing any other project needs - whereas option 2b eliminates all of this
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	654 extra work.
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	655
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	656 Finally, a philosophical argument can be made that FreeCalypso should be all
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	657 about simplicity, producing a phone that does its job: implement just what is
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	658 needed for a functional phone, and omit unnecessary baggage. An extra hardware
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	659 circuit (a chip connected to Calypso memory bus, no less) and associated
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	660 software complexity that serves absolutely no other purpose except to produce
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	661 ringtones that are "richer" than what the Calypso can produce on its own, and
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	662 does not assist in any way with hands-free loudspeaker operation for calls (it
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	663 is more of a hindrance in that mode), can be seen as an unwelcome burden similar
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	664 to other unwelcome burdens which we are already eliminating, like the camera.
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	665
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	666 In contrast, with our chosen option 2b, we have exactly zero extra hardware
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	667 that is just for ringing: our loudspeaker and its associated driver circuit
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	668 (simple amplifier) is primarily for hands-free calls, and the ability to use
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	669 the same audio path to play ringtone melodies comes literally "for free" with
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	670 the Melody E1 feature built into our Calypso DSP. We already have a selection
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	671 of nice-sounding ringtone melodies in E1 format, lifted from the legendary TSM30
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	672 source, and software complexity is minimal: the melody playing engine has
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	673 already been implemented by TI, we only need to call RiViera Audio Service API
f0419ac0a815 FC-handset-spec: ringtone generation documented Mychaela Falconia <falcon@freecalypso.org> parents: 46 diff changeset	674 functions.
48 cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	675
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	676 1.9. Vibrator
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	677
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	678 All traditional cellphones include a vibrator, and ours needs to include one
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	679 too. Our firmware will need to offer the options of being silent, vibrating
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	680 only, ringing only, or ringing and vibrating on an incoming call or SMS - all
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	681 of these options are genuinely useful to a heavy-duty phone user in different
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	682 situations.
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	683
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	684 In terms of functionality, the vibrator is envisioned as a simple on/off control
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	685 in the hardware, with higher-level "pulse train" functionality implemented in
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	686 the firmware. As far as end user experience goes, the Mother's plan is to copy
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	687 the way the vibrator works on the Pirelli DP-L10. On this to-be-replaced or
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	688 to-be-recreated reference phone, the vibrator works as follows: when an incoming
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	689 call arrives in vibrating alert mode, the firmware turns the vibrator on for
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	690 500 ms, then turns it off for 500 ms, and the cycle endlessly repeats until the
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	691 call is either answered or dropped. This 500 ms on/off cycling is purely a
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	692 firmware function, the hardware control is an on/off switch.
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	693
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	694 Looking at the hardware implementation of the vibrator driving circuit in the
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	695 Motorola C1xx family and in the Pirelli DP-L10, both designs support a form of
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	696 "analog" control of the vibrator beyond simple on/off. In the Mot C1xx family
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	697 the vibrator is controlled by the output of Iota auxiliary DAC, whereas in the
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	698 Pirelli DP-L10 Calypso BU output has been repurposed to control the vibrator,
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	699 allowing either full-on or PWM driving. However, Pirelli's firmware appears to
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	700 never operate the vibrator in any way other than fully on, and there is no
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	701 evidence of Mot C1xx firmwares applying any analog control to their vibrator
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	702 either.
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	703
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	704 The Mother's tentative plan for our FC Libre Dumbphone handset is to copy
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	705 Pirelli's approach in both hardware and firmware: repurpose Calypso BU output
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	706 for vibrator control (we won't have a buzzer, see section 1.8), allowing the
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	707 possibility of PWM, but have our firmware only use fully-on and fully-off
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	708 states, at least initially. However, because we won't have a vibrator on our
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	709 Venus development board, only in the final handset, this decision does not have
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	710 to be made right now.
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	711
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	712 Because our firmware will be designed for a simple on/off vibrator control,
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	713 during fw development on the Venus board it will be trivial to use a LED to
cb8d43a5023c FC-handset-spec: vibrator documented Mychaela Falconia <falcon@freecalypso.org> parents: 47 diff changeset	714 simulate the vibrator on/off state.
49 38bcb9425df0 FC-handset-state: battery documented Mychaela Falconia <falcon@freecalypso.org> parents: 48 diff changeset	715
38bcb9425df0 FC-handset-state: battery documented Mychaela Falconia <falcon@freecalypso.org> parents: 48 diff changeset	716 1.10. Battery
38bcb9425df0 FC-handset-state: battery documented Mychaela Falconia <falcon@freecalypso.org> parents: 48 diff changeset	717
38bcb9425df0 FC-handset-state: battery documented Mychaela Falconia <falcon@freecalypso.org> parents: 48 diff changeset	718 The battery in our FC Libre Dumbphone handset will be single-cell Li-ion. It
38bcb9425df0 FC-handset-state: battery documented Mychaela Falconia <falcon@freecalypso.org> parents: 48 diff changeset	719 goes without saying that this battery will be freely removable and replaceable
38bcb9425df0 FC-handset-state: battery documented Mychaela Falconia <falcon@freecalypso.org> parents: 48 diff changeset	720 by end users. The specific size, form factor and mAh capacity of this battery
38bcb9425df0 FC-handset-state: battery documented Mychaela Falconia <falcon@freecalypso.org> parents: 48 diff changeset	721 won't be addressed until later in the project, when we get closer to building
38bcb9425df0 FC-handset-state: battery documented Mychaela Falconia <falcon@freecalypso.org> parents: 48 diff changeset	722 the actual handset.
38bcb9425df0 FC-handset-state: battery documented Mychaela Falconia <falcon@freecalypso.org> parents: 48 diff changeset	723
38bcb9425df0 FC-handset-state: battery documented Mychaela Falconia <falcon@freecalypso.org> parents: 48 diff changeset	724 Our Calypso+Iota chipset dates from the era when the cellular handset industry
38bcb9425df0 FC-handset-state: battery documented Mychaela Falconia <falcon@freecalypso.org> parents: 48 diff changeset	725 was transitioning from NiMH to Li-ion batteries, and the Battery Charger
38bcb9425df0 FC-handset-state: battery documented Mychaela Falconia <falcon@freecalypso.org> parents: 48 diff changeset	726 Interface (BCI) block in the Iota chip supports both battery types, or at least
38bcb9425df0 FC-handset-state: battery documented Mychaela Falconia <falcon@freecalypso.org> parents: 48 diff changeset	727 TI's documentation claims so. Given that we are going against the mainstream
38bcb9425df0 FC-handset-state: battery documented Mychaela Falconia <falcon@freecalypso.org> parents: 48 diff changeset	728 society's ideas in so many other ways, I have given thought to the possibility
38bcb9425df0 FC-handset-state: battery documented Mychaela Falconia <falcon@freecalypso.org> parents: 48 diff changeset	729 of using a NiMH battery instead of Li-ion. However, the problem with using a
38bcb9425df0 FC-handset-state: battery documented Mychaela Falconia <falcon@freecalypso.org> parents: 48 diff changeset	730 NiMH battery is that we would be going into completely uncharted territory
38bcb9425df0 FC-handset-state: battery documented Mychaela Falconia <falcon@freecalypso.org> parents: 48 diff changeset	731 without any guidance. In the case of Li-ion batteries the charging process is
38bcb9425df0 FC-handset-state: battery documented Mychaela Falconia <falcon@freecalypso.org> parents: 48 diff changeset	732 well-understood in both theory and practice, and our FCHG logic based on reverse
38bcb9425df0 FC-handset-state: battery documented Mychaela Falconia <falcon@freecalypso.org> parents: 48 diff changeset	733 engineering of Pirelli's firmware works well both on the same Pirelli and on
38bcb9425df0 FC-handset-state: battery documented Mychaela Falconia <falcon@freecalypso.org> parents: 48 diff changeset	734 Motorola C1xx family. In contrast, if we went with NiMH, we would have
38bcb9425df0 FC-handset-state: battery documented Mychaela Falconia <falcon@freecalypso.org> parents: 48 diff changeset	735 absolutely no guidance in implementing the necessary charging control logic
38bcb9425df0 FC-handset-state: battery documented Mychaela Falconia <falcon@freecalypso.org> parents: 48 diff changeset	736 (TI's LCC code is useless), causing a huge risk to the project. Furthermore,
38bcb9425df0 FC-handset-state: battery documented Mychaela Falconia <falcon@freecalypso.org> parents: 48 diff changeset	737 determining the state of charge from Vbat for the purpose of the bars icon is
38bcb9425df0 FC-handset-state: battery documented Mychaela Falconia <falcon@freecalypso.org> parents: 48 diff changeset	738 already somewhat challenging even with Li-ion, given the relatively flat middle
38bcb9425df0 FC-handset-state: battery documented Mychaela Falconia <falcon@freecalypso.org> parents: 48 diff changeset	739 part of the discharge curve - and with NiMH we can only expect the problem to be
38bcb9425df0 FC-handset-state: battery documented Mychaela Falconia <falcon@freecalypso.org> parents: 48 diff changeset	740 even worse, as their discharge curve is said to be even flatter. For these
38bcb9425df0 FC-handset-state: battery documented Mychaela Falconia <falcon@freecalypso.org> parents: 48 diff changeset	741 reasons, we are going to play it safe and stick with Li-ion.
50 da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	742
68 bdc5d8d9fa1f FC-handset-spec: new section 1.10.1 clarifies battery ID Mychaela Falconia <falcon@freecalypso.org> parents: 67 diff changeset	743 1.10.1. Battery ID resistors or thermistors
bdc5d8d9fa1f FC-handset-spec: new section 1.10.1 clarifies battery ID Mychaela Falconia <falcon@freecalypso.org> parents: 67 diff changeset	744
bdc5d8d9fa1f FC-handset-spec: new section 1.10.1 clarifies battery ID Mychaela Falconia <falcon@freecalypso.org> parents: 67 diff changeset	745 In all classic dumbphones from the era which we seek to revive (the ones with
bdc5d8d9fa1f FC-handset-spec: new section 1.10.1 clarifies battery ID Mychaela Falconia <falcon@freecalypso.org> parents: 67 diff changeset	746 user-removable batteries), the battery pack (flat pouch) has 3 or 4 contacts
bdc5d8d9fa1f FC-handset-spec: new section 1.10.1 clarifies battery ID Mychaela Falconia <falcon@freecalypso.org> parents: 67 diff changeset	747 rather than just 2: in addition to battery +ve and -ve terminals, there are some
bdc5d8d9fa1f FC-handset-spec: new section 1.10.1 clarifies battery ID Mychaela Falconia <falcon@freecalypso.org> parents: 67 diff changeset	748 ID resistors or thermistors included. Both Motorola C1xx and Pirelli DP-L10
bdc5d8d9fa1f FC-handset-spec: new section 1.10.1 clarifies battery ID Mychaela Falconia <falcon@freecalypso.org> parents: 67 diff changeset	749 batteries have 3 contacts, and so does Nokia BL-6C battery form factor that was
bdc5d8d9fa1f FC-handset-spec: new section 1.10.1 clarifies battery ID Mychaela Falconia <falcon@freecalypso.org> parents: 67 diff changeset	750 copied by FIC/Openmoko. In contrast, cylindrical Li-ion battery cells like
bdc5d8d9fa1f FC-handset-spec: new section 1.10.1 clarifies battery ID Mychaela Falconia <falcon@freecalypso.org> parents: 67 diff changeset	751 18650 have no such third terminal.
bdc5d8d9fa1f FC-handset-spec: new section 1.10.1 clarifies battery ID Mychaela Falconia <falcon@freecalypso.org> parents: 67 diff changeset	752
bdc5d8d9fa1f FC-handset-spec: new section 1.10.1 clarifies battery ID Mychaela Falconia <falcon@freecalypso.org> parents: 67 diff changeset	753 Because we are deferring our handset battery design to a later project phase
bdc5d8d9fa1f FC-handset-spec: new section 1.10.1 clarifies battery ID Mychaela Falconia <falcon@freecalypso.org> parents: 67 diff changeset	754 (not included on the Venus board), we don't know at this time whether or not
bdc5d8d9fa1f FC-handset-spec: new section 1.10.1 clarifies battery ID Mychaela Falconia <falcon@freecalypso.org> parents: 67 diff changeset	755 our final handset battery pack will have any ID resistor and/or thermistor
bdc5d8d9fa1f FC-handset-spec: new section 1.10.1 clarifies battery ID Mychaela Falconia <falcon@freecalypso.org> parents: 67 diff changeset	756 connected to Iota ADIN1 or ADIN2. Our current FCHG battery charging driver
bdc5d8d9fa1f FC-handset-spec: new section 1.10.1 clarifies battery ID Mychaela Falconia <falcon@freecalypso.org> parents: 67 diff changeset	757 does not touch ADIN1 or ADIN2 at all; if we do end up having an ID resistor or
bdc5d8d9fa1f FC-handset-spec: new section 1.10.1 clarifies battery ID Mychaela Falconia <falcon@freecalypso.org> parents: 67 diff changeset	758 thermistor and needing to support it, that custom support will have to be added
bdc5d8d9fa1f FC-handset-spec: new section 1.10.1 clarifies battery ID Mychaela Falconia <falcon@freecalypso.org> parents: 67 diff changeset	759 at the time of the actual handset design.
bdc5d8d9fa1f FC-handset-spec: new section 1.10.1 clarifies battery ID Mychaela Falconia <falcon@freecalypso.org> parents: 67 diff changeset	760
50 da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	761 1.11. Charging circuit
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	762
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	763 Our FC Libre Dumbphone will feature a USB port (mini-B, device role only, no
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	764 OTG) that combines two logically separate functions: battery charging and
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	765 computer interface. The basic idea of this dual-function USB port comes from
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	766 Pirelli DP-L10, but we are applying significant refinements of our own to this
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	767 general idea, as the following description will make clear. This section
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	768 describes the charging function; the computer interface function is described
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	769 in section 1.12.
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	770
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	771 One highly non-standard innovation that will appear on our FC handset will be a
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	772 user-visible mechanical slide switch that will turn the charging circuit on or
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	773 off. The purpose of this charging on/off switch is to make it possible to
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	774 connect USB and have the two ttyUSB devices appear (see section 1.12) without
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	775 presenting a 'charger plug' boot condition to the Calypso+Iota core chipset.
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	776 From an end user perspective, if you only use the USB port for charging and
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	777 don't care about the computer interface function, then leave the charging switch
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	778 always on - USB plug/unplug will mean charger plug/unplug like on any
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	779 conventional phone. Similarly, if you do use the computer interface function to
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	780 connect your phone to a host computer in regular operation, with the firmware
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	781 up and running normally, but you don't mind having the phone also charge from
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	782 your computer every time you connect USB, then likewise leave the charging
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	783 switch always on. However, if you are going to reflash phone firmware or do
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	784 other advanced manipulations using the computer interface, then you will need
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	785 to turn the charging switch off. With the switch off, the USB port becomes a
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	786 computer interface only, without charging.
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	787
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	788 Past the switch, the battery charging circuit using USB +5V as the charging
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	789 power source will be the most classic one depicted in Figure 4-10 in the Iota
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	790 chip datasheet (TWL3025_SWRS021.pdf), same as in Pirelli DP-L10 and Motorola
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	791 C1xx phones. Presentation of USB +5V to Iota VCHG terminal past the charging
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	792 on/off switch is what will cause the chipset to boot in the 'charger plug' mode,
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	793 or to activate charging functions in the firmware if the phone is already on.
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	794
75 c458b7159fbd FC-handset-spec: add charging indicator LED Mychaela Falconia <falcon@freecalypso.org> parents: 74 diff changeset	795 1.11.1. Charging indicator LED
c458b7159fbd FC-handset-spec: add charging indicator LED Mychaela Falconia <falcon@freecalypso.org> parents: 74 diff changeset	796
c458b7159fbd FC-handset-spec: add charging indicator LED Mychaela Falconia <falcon@freecalypso.org> parents: 74 diff changeset	797 We are going to implement a TI-classic charging indicator LED controlled by
c458b7159fbd FC-handset-spec: add charging indicator LED Mychaela Falconia <falcon@freecalypso.org> parents: 74 diff changeset	798 Iota LEDC; the circuit is nothing more than a LED in series with a resistor,
c458b7159fbd FC-handset-spec: add charging indicator LED Mychaela Falconia <falcon@freecalypso.org> parents: 74 diff changeset	799 connected between the VCHG rail and Iota LEDC terminal. The LED will probably
c458b7159fbd FC-handset-spec: add charging indicator LED Mychaela Falconia <falcon@freecalypso.org> parents: 74 diff changeset	800 be red (TBD), such indicator LEDs have low Vf, and because the positive source
c458b7159fbd FC-handset-spec: add charging indicator LED Mychaela Falconia <falcon@freecalypso.org> parents: 74 diff changeset	801 is USB +5V rather than VBAT, there should be no issues with LED brightness
c458b7159fbd FC-handset-spec: add charging indicator LED Mychaela Falconia <falcon@freecalypso.org> parents: 74 diff changeset	802 variation.
c458b7159fbd FC-handset-spec: add charging indicator LED Mychaela Falconia <falcon@freecalypso.org> parents: 74 diff changeset	803
50 da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	804 1.12. Computer interface
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	805
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	806 Our Calypso chip has no native USB, instead the host computer interface of all
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	807 Calypso-based systems consists of two UARTs. On our development boards starting
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	808 with FCDEV3B, we got used to interfacing to both of these UARTs by way of
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	809 FT2232x adapters, a USB to serial adapter that goes from one USB device to two
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	810 UARTs, presenting two ttyUSB devices to a Linux host. For low-level operations
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	811 like flash programming, having just one Calypso UART is sufficient (either of
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	812 the two), but once our regular firmware is up and running, then having both
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	813 Calypso UARTs gives maximum user empowerment: Modem UART carries a classic AT
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	814 command interface complete with CSD, GPRS and GSM 07.10 MUX capabilities, while
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	815 the other UART (IrDA) carries TI's RVTMUX debug and development interface.
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	816
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	817 Before arriving at our current radical approach with the charging on/off switch,
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	818 for many years previously I was considering a more conservative approach. My
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	819 original idea was to bring out the two Calypso UARTs in very different ways: my
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	820 thought was to bring only the Modem UART to the built-in USB port (by way of a
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	821 built-in single-channel USB-serial chip), and have plugged-in USB always present
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	822 VCHG to the chipset, but route the debug UART (the one most useful in low-level
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	823 development and bring-up) to a special FPC connector that would interface to a
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	824 special debug board, just like Openmoko did on their Neo. Serious development
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	825 work would then require having that debug board attached, while more casual
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	826 users would be able to talk AT commands to the phone via the built-in USB port,
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	827 charging the battery at the same time.
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	828
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	829 What made me change my mind about this design was the realization that I, as the
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	830 most principal user and developer, would end up wanting to have the debug board
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	831 attached all the time, and the need to have it hanging externally, or perhaps
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	832 glued or taped to the back of the phone, would be a huge blemish and
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	833 inconvenience. Back in the days of Openmoko, someone must have had a similar
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	834 experience, as I remember reading about a hack where someone built a debug board
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	835 functional equivalent that fits inside the Neo, in some otherwise unused space.
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	836
da1a2a32c260 FC-handset-spec: USB description started Mychaela Falconia <falcon@freecalypso.org> parents: 49 diff changeset	837 Hence the new design for our planned FC Libre Dumbphone handset: the USB port
51 7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	838 will have a built-in FT2232D (or perhaps FT2232H) subsystem (USB to two UARTs)
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	839 connected to it, interfacing to both Calypso UARTs, while the charging on/off
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	840 switch will make it possible to use this interface for low-level development
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	841 and bring-up without presenting VCHG to the chipset. In this architecture this
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	842 FT2232x subsystem should be considered the primary "owner" of the handset's USB
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	843 port, while the charging function is secondary and optional, enabled or disabled
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	844 with a switch. To put it another way, if our USB port is connected to a regular
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	845 USB host (as opposed to a Dedicated Charging Port power-only source), that USB
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	846 host will always enumerate the FT2232x and see two ttyUSB devices, whereas
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	847 charging may or may not take place depending on the switch setting.
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	848
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	849 1.12.1. Set of UART signals
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	850
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	851 The set of signals to be connected between Calypso and FT2232x for the Modem
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	852 UART is almost complete:
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	853
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	854 USB UART
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	855 DTE signal Calypso signal
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	856 ------------------------------
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	857 TxD RX_MODEM
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	858 RxD TX_MODEM
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	859 RTS CTS_MODEM
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	860 CTS RTS_MODEM
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	861 DTR GPIO3
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	862 DCD GPIO2
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	863 RI GPIO8
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	864
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	865 Only DSR is omitted for the Modem UART channel, all others are included. The
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	866 second debug UART channel is only two wires:
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	867
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	868 USB UART
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	869 DTE signal Calypso signal
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	870 ------------------------------
52 cfe8623b915d FC-handset-spec: UART signal pull-up/down documented Mychaela Falconia <falcon@freecalypso.org> parents: 51 diff changeset	871 TxD2 RX_IRDA
cfe8623b915d FC-handset-spec: UART signal pull-up/down documented Mychaela Falconia <falcon@freecalypso.org> parents: 51 diff changeset	872 RxD2 TX_IRDA
51 7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	873
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	874 However, as shown in the next section, these signals cannot be simply connected
52 cfe8623b915d FC-handset-spec: UART signal pull-up/down documented Mychaela Falconia <falcon@freecalypso.org> parents: 51 diff changeset	875 between Calypso and FT2232x, instead a more complicated scheme needs to be
cfe8623b915d FC-handset-spec: UART signal pull-up/down documented Mychaela Falconia <falcon@freecalypso.org> parents: 51 diff changeset	876 implemented.
51 7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	877
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	878 1.12.2. USB and mobile power domains
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	879
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	880 Our FC Libre Dumbphone handset will have two principal power domains in it: the
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	881 main battery-powered mobile domain, and the USB domain. This power domain
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	882 situation presents some very significant challenges, a problem generally
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	883 referred to as "partial power-down". There are two PPD scenarios to be
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	884 concerned about:
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	885
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	886 1) In normal operation the phone is mobile and not connected to USB. In this
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	887 state the mobile power domain is on, whereas USB-powered circuits in the
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	888 FT2232x subsystem have no power. The two challenges in this state are:
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	889
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	890 1a) We need to ensure that no currents flow from the powered-on mobile domain
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	891 into powered-down USB domain circuits, as any such currents would be an
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	892 unacceptable drain on the battery.
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	893
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	894 1b) Calypso UART inputs that come from the USB domain when the latter is active
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	895 need to have defined logic levels on them when the USB domain has no power:
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	896 no floating, no mid-way levels that would cause higher currents in CMOS
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	897 input structures, and furthermore, some Calypso inputs need to be high in
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	898 this state, while others need to be low.
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	899
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	900 2) A reverse PPD scenario occurs when the USB domain has power, but the
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	901 Calypso+Iota chipset is in its switched-off state per Iota VRPC. This
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	902 scenario can occur when the charging switch is set to off, or when the
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	903 battery is critically low and undergoing precharge. The main concern in
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	904 this state is to avoid feeding power from the USB domain into the Calypso
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	905 chipset's V-IO rail - our experience on Caramel2 boards conclusively
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	906 demonstrates that Calypso does not like this condition and can behave oddly,
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	907 erratically feeding current into its outputs that are supposed to be low or
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	908 Hi-Z, and thereby erratically turning on various peripherals.
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	909
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	910 If we were to naively connect our UART signals between Calypso and FT2232x, the
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	911 result would be bad: all of the above concerns would be violated. Instead we
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	912 need to insert carefully designed isolating buffer circuits in both directions.
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	913
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	914 1.12.2.1. Calypso to FT2232x signal direction
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	915
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	916 If these signals were connected directly, significant current (in the mA range)
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	917 would flow from Calypso outputs into powered-down FT2232x inputs, which is not
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	918 acceptable. Our solution is to insert an LVC buffer (probably 74LVC541A, for
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	919 the 5 signals that are needed) between Calypso outputs and FT2232x inputs, with
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	920 the buffer powered from USB domain 3.3V supply. With mobile on and USB power
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	921 absent, the LVC buffer's Ioff spec will apply, which is listed in Nexperia's
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	922 74LVC541A datasheet as 0.1 uA typical, 10 uA maximum.
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	923
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	924 An unfortunate consequence of this design is that in the opposite PPD scenario
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	925 (USB connected to a host, charging switch off, mobile chipset in its off state)
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	926 the inputs to the LVC buffer will float, with FT2232x inputs receiving garbage
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	927 as a result. Adding pull-up resistors to a USB-domain supply would cause other
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	928 problems, hence the Mother's position is that we'll just live with a few
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	929 floating inputs in this particular condition - and it is a condition that
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	930 should not persist for extended lengths of time. There is also a software
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	931 consideration stemming from this floating input situation: when you are doing
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	932 low-level programming and development operations in this state, don't open the
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	933 Modem UART ttyUSB device, and only operate via the other debug UART. The latter
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	934 is a 2-wire UART without any flow control or modem control signals, hence there
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	935 will be less bogosity for the Linux host to see in this state.
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	936
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	937 1.12.2.2. FT2232x to Calypso signal direction
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	938
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	939 This direction is even more difficult, and we will need to insert two chained
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	940 LVC buffers: the signals will first pass through an LVC buffer powered from the
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	941 USB domain, and then through another LVC buffer powered from the Calypso+Iota
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	942 chipset's V-IO rail. There will be pull resistors inserted between the two
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	943 buffers: either pull-up to VBAT (raw battery positive rail) or pull-down to GND,
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	944 depending on the needed signal sense.
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	945
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	946 The LVC buffer powered from Calypso V-IO is needed in order to prevent current
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	947 feeding into Calypso when the mobile is switched off - the buffer's Ioff spec
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	948 will apply. Pull-up and pull-down resistors in front of this buffer are needed
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	949 so that Calypso inputs will receive the desired states when no USB host is
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	950 connected. Pull-ups are being made to VBAT instead of V-IO to eliminate the
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	951 possibility of current feeding into V-IO through these resistors. (Feeding
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	952 from 3.3V logic signals into the battery can't happen when the battery is above
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	953 3.3 V, and if the battery is below 3.3 V, then we are only adding a little to
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	954 the precharge current.)
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	955
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	956 The other LVC buffer (the one powered from USB-domain 3.3V) is needed because
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	957 in the absence of this buffer, current will flow through pull-up resistors and
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	958 into powered-down FT2232x output pins, the resulting pull-down resistance will
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	959 be lower than the pull-up, and the next buffer won't receive the desired logic
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	960 level, not to mention unwanted current flowing. With the other LVC buffer
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	961 added, that buffer's Ioff spec will apply.
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	962
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	963 The value of pull-up resistors to VBAT will be 22 kOhm. With maximum 15 uA
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	964 current flowing through each resistor (worst-case Ioff of one buffer plus
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	965 worst-case Ii of the other buffer), the maximum voltage drop on the 22 kOhm
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	966 resistor will be 330 mV. In order for the LVC buffer's input structure to not
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	967 draw extra current, the input voltage needs to be 2.8 V or higher - thus with
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	968 22 kOhm resistors we'll keep satisfying this condition until the battery falls
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	969 to about 3.1 V, which is below the operational range for switched-on mobile.
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	970
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	971 One downside of having pull-ups to VBAT (which can be as high as 4.2 V) on
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	972 signals that are output from a 3.3V-powered buffer is that when the buffer
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	973 output is high, there may be current flowing into that high output (not sourcing
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	974 out of it as normally expected), which is a bad condition for CMOS outputs.
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	975 However, this current will be limited to a maximum of about 40 uA
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	976 ((4.2-3.3 V) / 22 kOhm), and my feeling is that such small current won't hurt
7933c3a1b5e0 FC-handset-spec: power domain mess documented Mychaela Falconia <falcon@freecalypso.org> parents: 50 diff changeset	977 Nexperia LVC buffers.
52 cfe8623b915d FC-handset-spec: UART signal pull-up/down documented Mychaela Falconia <falcon@freecalypso.org> parents: 51 diff changeset	978
cfe8623b915d FC-handset-spec: UART signal pull-up/down documented Mychaela Falconia <falcon@freecalypso.org> parents: 51 diff changeset	979 1.12.2.2.1. Signal pull-up/down directions
cfe8623b915d FC-handset-spec: UART signal pull-up/down documented Mychaela Falconia <falcon@freecalypso.org> parents: 51 diff changeset	980
cfe8623b915d FC-handset-spec: UART signal pull-up/down documented Mychaela Falconia <falcon@freecalypso.org> parents: 51 diff changeset	981 Of the 4 UART signals going from FT2232x to Calypso (see section 1.12.1), TxD
cfe8623b915d FC-handset-spec: UART signal pull-up/down documented Mychaela Falconia <falcon@freecalypso.org> parents: 51 diff changeset	982 and TxD2 MUST be sensed high by Calypso when no USB host is connected, hence
cfe8623b915d FC-handset-spec: UART signal pull-up/down documented Mychaela Falconia <falcon@freecalypso.org> parents: 51 diff changeset	983 they will need the two chained LVC buffers with pull-ups to VBAT in between, as
cfe8623b915d FC-handset-spec: UART signal pull-up/down documented Mychaela Falconia <falcon@freecalypso.org> parents: 51 diff changeset	984 described above. RTS and DTR are less critical in that either high or low level
cfe8623b915d FC-handset-spec: UART signal pull-up/down documented Mychaela Falconia <falcon@freecalypso.org> parents: 51 diff changeset	985 would be acceptable, as long as it is stable and not floating. However, it is
cfe8623b915d FC-handset-spec: UART signal pull-up/down documented Mychaela Falconia <falcon@freecalypso.org> parents: 51 diff changeset	986 slightly preferable to have DTR pulled up like TxD (to be sensed as logically
cfe8623b915d FC-handset-spec: UART signal pull-up/down documented Mychaela Falconia <falcon@freecalypso.org> parents: 51 diff changeset	987 negated), and to have RTS (flow control signal going to CTS_MODEM) pulled down,
cfe8623b915d FC-handset-spec: UART signal pull-up/down documented Mychaela Falconia <falcon@freecalypso.org> parents: 51 diff changeset	988 to be sensed as logically asserted.
cfe8623b915d FC-handset-spec: UART signal pull-up/down documented Mychaela Falconia <falcon@freecalypso.org> parents: 51 diff changeset	989
cfe8623b915d FC-handset-spec: UART signal pull-up/down documented Mychaela Falconia <falcon@freecalypso.org> parents: 51 diff changeset	990 The approach chosen by the Mother is to have TxD, TxD2 and DTR pulled up to VBAT
cfe8623b915d FC-handset-spec: UART signal pull-up/down documented Mychaela Falconia <falcon@freecalypso.org> parents: 51 diff changeset	991 as described above, and to have RTS pulled down to GND. The value of the pull-
cfe8623b915d FC-handset-spec: UART signal pull-up/down documented Mychaela Falconia <falcon@freecalypso.org> parents: 51 diff changeset	992 down resistor to GND will be 47 kOhm, and the USB-side-powered LVC buffer can be
cfe8623b915d FC-handset-spec: UART signal pull-up/down documented Mychaela Falconia <falcon@freecalypso.org> parents: 51 diff changeset	993 skipped for this signal - that buffer is only needed in order to work correctly
cfe8623b915d FC-handset-spec: UART signal pull-up/down documented Mychaela Falconia <falcon@freecalypso.org> parents: 51 diff changeset	994 with the pull-up to VBAT.
cfe8623b915d FC-handset-spec: UART signal pull-up/down documented Mychaela Falconia <falcon@freecalypso.org> parents: 51 diff changeset	995
cfe8623b915d FC-handset-spec: UART signal pull-up/down documented Mychaela Falconia <falcon@freecalypso.org> parents: 51 diff changeset	996 With only 3 FT2232x-to-Calypso signals needing to go through a USB-side-powered
cfe8623b915d FC-handset-spec: UART signal pull-up/down documented Mychaela Falconia <falcon@freecalypso.org> parents: 51 diff changeset	997 LVC buffer, and with 3 slots remaining available in the 74LVC541A buffer from
cfe8623b915d FC-handset-spec: UART signal pull-up/down documented Mychaela Falconia <falcon@freecalypso.org> parents: 51 diff changeset	998 section 1.12.2.1, that one 74LVC541A IC can serve both signal directions (5
cfe8623b915d FC-handset-spec: UART signal pull-up/down documented Mychaela Falconia <falcon@freecalypso.org> parents: 51 diff changeset	999 signals from Calypso to FT2232x and 3 signals going the other way), reducing the
cfe8623b915d FC-handset-spec: UART signal pull-up/down documented Mychaela Falconia <falcon@freecalypso.org> parents: 51 diff changeset	1000 component count.
53 016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1001
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1002 1.12.3. Boot control by USB host
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1003
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1004 Our DUART28C adapter (DUART28 hardware, EEPROM in the 'C' configuration) has a
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1005 nifty feature in the form of CTL1 and CTL2 open drain outputs, intended for
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1006 triggering Iota VRPC boot control signals on Calypso devices, i.e., boot control
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1007 signals from the {PWON, RPWON, nTESTRESET} set. So far none of our FreeCalypso
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1008 development boards bring out RPWON, but both FCDEV3B and Caramel2 feature PWON
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1009 and nTESTRESET controls, and we have an established convention for driving them
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1010 with CTL1 and CTL2 from a DUART28C. The end effect for the developer-operator
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1011 is that one can run operations based on Calypso boot ROM loading path (fc-iram,
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1012 fc-loadtool etc) purely from the host command line, without needing to press any
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1013 buttons on the development board: adding -Prts to the command line is equivalent
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1014 to pressing PWON, or adding -Pdtr is equivalent to pressing RESET. rvinterf can
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1015 also be run with the same options, allowing flashed firmware to be booted in a
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1016 similar no-buttons-needed manner.
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1017
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1018 It is the Mother's intent to replicate this boot control feature on our FC Libre
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1019 Dumbphone handset as well, i.e., make FT2232x Channel B RTS and DTR outputs
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1020 (otherwise unused) act as host-driven boot control triggers. In hardware terms,
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1021 this addition consists of just one tiny IC (74LVC2G07) and two pull-up resistors
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1022 on the BDBUS[24] lines from FT2232x to this OD buffer. FT2232x EEPROM will be
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1023 programmed with the same custom USB ID as DUART28C, and the Linux kernel
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1024 ftdi_sio driver will need to have our DUART28C support patch added to it.
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1025
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1026 There will be one change from our previous convention, however: the OD buffer
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1027 output controlled with Channel B RTS will be wired to RPWON rather than PWON;
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1028 the other OD buffer output controlled with Channel B DTR will still be wired to
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1029 nTESTRESET like before. The reason for this change is that our handset firmware
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1030 has more complex logic that treats different boot causes differently (as
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1031 required for standard expected handset functionality), and Iota PWON is now
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1032 reserved solely for the end user power-on button. Host-commanded boot needs to
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1033 be different from this end user power-on button (no long press is required, and
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1034 the firmware should enter its misc boot state that behaves like an ACI build),
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1035 hence we are changing the wiring so that -Prts will trigger RPWON rather than
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1036 PWON. The same boot effect can still be achieved with -Pdtr triggering
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1037 nTESTRESET, but it is a bigger hammer (reset of RTC can be unwanted), hence
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1038 -Prts will be recommended as the gentler option, leaving -Pdtr for times when
016f8cf2418c FC-handset-spec: boot control idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 52 diff changeset	1039 recovery from runaway code is needed.
54 138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1040
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1041 2. FC handset firmware functional scope specification
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1042
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1043 FreeCalypso handset firmware will always run (perhaps with subset functionality)
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1044 on more hardware targets than just our main-goal FC Libre Dumbphone handset. It
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1045 already does: our firmware currently runs on our Luna development platform, and
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1046 prior to FC it ran on TI's original D-Sample platform. A very restricted
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1047 functional subset also runs on Motorola C139 hardware.
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1048
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1049 If we consider only the main goal of FC Libre Dumbphone handset, then our
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1050 firmware evolution can be seen as strictly linear: we start with what we got
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1051 from TI, and we morph it toward what will be needed to operate our handset,
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1052 adding functionality and peripheral support which we need for our FC handset,
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1053 but which is not present in the starting point code from TI. However, we also
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1054 have side-branch functionality: at times when the code from TI supports
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1055 something which we don't need for our own FC handset, but which may be useful
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1056 for alien hardware targets, a moral imperative can be made for keeping and at
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1057 least minimally maintaining that functionality as a kind of side-branch feature,
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1058 a permitted configuration that is not needed for our own FC handset but needed
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1059 for others. Similarly, when we add support for entirely new peripherals that
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1060 are planned for our FC handset (such as the loudspeaker), we should make the
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1061 firmware change in such a way that targets without the extra feature can still
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1062 be supported. Finally, when we are changing the firmware in ways that
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1063 significantly depart from TI's original, it may sometimes be prudent to preserve
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1064 TI's original way as a lorekeeping option.
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1065
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1066 The following sections will spell out what we support and what we don't support
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1067 in FreeCalypso handset firmware, and how these scoping decisions relate to our
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1068 starting point from TI, to our main goal of FC Libre Dumbphone handset, and to
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1069 secondary objectives of alien target support and lorekeeping.
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1070
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1071 2.1. Display support
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1072
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1073 2.1.1. Support for different display sizes
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1074
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1075 By the very nature of the problem, any phone handset UI design will always be
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1076 quite specific to a particular display size in pixels, and also to the display
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1077 type as in color or black&white. The starting point code we got from TI
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1078 supports 3 different UI configurations in terms of size and coloration:
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1079
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1080 * 176x220 pixel, 16-bit color;
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1081 * 176x220 pixel B&W;
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1082 * 84x48 pixel B&W.
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1083
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1084 In FreeCalypso we have made two changes to this set of possible UI
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1085 configurations:
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1086
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1087 1) The large (176x220 pixel) B&W option has been removed. In TI's delivery this
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1088 option was nothing more than a quick&dirty hack to extend their small (84x48
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1089 pixel) B&W UI to the large D-Sample screen, and this configuration offers
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1090 nothing useful - any real display of such large size will always be color.
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1091
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1092 2) The small B&W configuration has been extended from 84x48 to 96x64 pixels.
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1093 Why 96x64? Because it is the size in pixels of Motorola C139 LCD, and it is
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1094 the smallest LCD size found among those alien Calypso phones whose existence
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1095 is known to us and for which we have at least minimal support. Extending
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1096 this UI configuration from 84x48 to 96x64 pixels was an easy change because
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1097 it is an increase in screen real estate (not a decrease), and it is a fairly
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1098 small increment, such that UI design choices which were sensible for an 84x48
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1099 pixel display are still sensible for 96x64.
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1100
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1101 The main principal difference between our approach in FreeCalypso and what a
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1102 conventional commercial phone manufacturer would have done is that we are
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1103 retaining TI's smallbw configuration and keeping it supported, as opposed to
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1104 disregarding it and working only on the bigcolor UI config for our own planned
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1105 hardware product. We keep this smallbw UI configuration around, in the extended
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1106 96x64 pixel size, for two reasons:
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1107
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1108 1) Lorekeeping: unlike TI's 176x220 pixel B&W config that was totally
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1109 uninteresting, TI's old smallbw UI (from the days of C-Sample) is
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1110 sufficiently interesting and unique (and naturally quite different from the
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1111 bigcolor version) to be worth preserving.
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1112
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1113 2) By keeping this configuration around (not discarding it and not allowing it
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1114 to bitrot beyond repair), we keep the door open for the possibility of a
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1115 minimally usable FreeCalypso Lite aftermarket firmware for Motorola C139.
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1116
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1117 Both UI configurations can be built for our current Luna platform, and both of
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1118 them display on our Luna LCD. The virtual framebuffer of 96x64 pix B&W in the
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1119 smallbw config is displayed in the center of our physical 176x220 pixel color
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1120 LCD, surrounded by a pale magenta border. The same ability to run both configs
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1121 will continue on our next development board (Venus).
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1122
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1123 2.1.2. Backlight readability paradigm
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1124
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1125 (See theoretical background in section 1.4.3.)
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1126
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1127 Our actively maintained FC handset firmware has been paradigmatically redesigned
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1128 to assume a display which is NOT readable without the backlight. Our logical
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1129 primitives with respect to display control are display on/off, rather than
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1130 backlight on/off, and we swallow the initial keypress that turns on the display.
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1131
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1132 This change is a significant departure from TI's original. The LCD on TI's
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1133 D-Sample is transflective, and when the backlight is off, the display remains
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1134 readable in ambient light. It is certainly better in this regard than Motorola
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1135 C139 LCD. And if we go back further in TI's history to C-Sample and earlier,
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1136 those 84x48 pixel B&W LCDs were the traditional mostly-reflective type,
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1137 perfectly readable without the backlight.
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1138
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1139 This area is one where we are NOT retaining TI's original way as an option in
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1140 our actively maintained firmware. The difference between the two principal
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1141 paradigms is too great, and we don't have any active-demand prospective targets
138021ca5eae FC-handset-spec: starting firmware scope description Mychaela Falconia <falcon@freecalypso.org> parents: 53 diff changeset	1142 with B&W displays of the old traditional kind.
55 df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1143
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1144 2.2. Keypad assumptions
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1145
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1146 The keypad arrangement on our FC handset (see sections 1.5 and 1.6) will be
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1147 exactly the same as on TI's D-Sample, thus no principal changes to the firmware
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1148 are needed in this regard. Furthermore, the same 21-button keypad exists on
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1149 Motorola C1xx phones, thus no firmware design variations are needed in this
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1150 regard for secondary target support.
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1151
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1152 The only issue of concern is that the 3 side buttons which exist on D-Sample and
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1153 Pirelli DP-L10 and will also exist on our FC handset don't exist on Mot C1xx.
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1154 Our starting point code from TI does not do anything with these buttons (even
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1155 though it was developed on the D-Sample platform where they exist), but when we
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1156 do get around to adding support for these side buttons, we will need to take
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1157 some extra care in preserving flexibility:
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1158
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1159 * The original code from TI uses navigation up/down buttons for volume control,
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1160 for both ringer and earpiece volume. We are going to change the code to drive
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1161 these volume controls with side buttons instead (dedicated volume up/down
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1162 buttons), but when we make this change, we'll need to provide an option of
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1163 restoring the old way for less button-equipped phones like Mot C1xx.
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1164
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1165 * Whatever functions we assign to the right side button, all of them will be
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1166 our own inventions, as none exist in TI's original code. However, this right
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1167 side button does not exist on Mot C1xx. The Mother's idea is to assign the
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1168 right side button to loudspeaker on/off control - this arrangement will work
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1169 well as the same C1xx phones that lack this button also lack the hands-free
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1170 loudspeaker.
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1171
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1172 2.2.1. No support for 18-button main keypads
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1173
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1174 Prior to D-Sample, TI's C-Sample and earlier boards had keypads with fewer
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1175 buttons, 18 instead of 21, and no side buttons. The difference between the
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1176 C-Sample 18-button main keypad and the 21-button one found on D-Sample, Pirelli
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1177 DP-L10 and Motorola C1xx is that the older 18-button keypad has only up and down
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1178 navigation buttons in the place where the 21-button version has a 5-way
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1179 navigation button group. In other words, navigation left, right and center keys
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1180 don't exist on the 18-button version.
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1181
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1182 TI's demo/prototype/PoC UI code was originally developed on C-Sample or perhaps
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1183 even earlier, thus it was originally designed for the 18-button keypad
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1184 arrangement. For this reason, the code currently makes very little use of
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1185 navigation left, right and center keys. However, some limited use is already
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1186 being made of these extra keys (primarily on text and number entry screens, aka
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1187 the editor), and our use of all available keys in the UI will keep growing. As
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1188 a matter of project scope, we are NOT supporting backward compatibility with
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1189 18-button keypads, given that the lowest-end Mot C1xx family already has
df6c61d0e817 FC-handset-spec: firmware keypad model documented Mychaela Falconia <falcon@freecalypso.org> parents: 54 diff changeset	1190 21-button keypads.
56 a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1191
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1192 2.3. Audio routing
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1193
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1194 TI's demo/prototype/PoC UI code from TCS211 does not use the audio mode facility
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1195 of the RiViera Audio Service: ABB configuration remains the default set in L1
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1196 initialization, volume control is done by calling audio_SetAmplf() in the Condat
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1197 abstraction layer, which in turn calls ABB_DlVolume(). This design will need to
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1198 change in FreeCalypso: we will start using the RiViera Audio Service audio mode
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1199 facility, and the use of this facility (including correct audio mode
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1200 configuration files under /aud in FFS) will become mandatory on all targets.
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1201
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1202 The following 3 audio modes are defined for call audio routing and idle
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1203 operation (keyclicks etc), as opposed to Melody E1 ringing covered in section
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1204 2.4.2:
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1205
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1206 Mode name Used for
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1207 ------------------------
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1208 handheld Default handheld operation and idle state
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1209 handfree Calls in hands-free loudspeaker mode
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1210 headset When a wired analog headset is plugged in
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1211
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1212 At the minimum, valid /aud/handheld.{cfg,vol} files will need to be created in
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1213 FFS on every supported target; other modes can be omitted if they can't be
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1214 entered. /aud/*.vol files maintained by RiViera Audio Service will serve as the
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1215 non-volatile volume setting store for each mode.
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1216
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1217 2.3.1. Loudspeaker inclusion or omission
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1218
66 a2857b6c3d87 FC-handset-spec section 2.3.1: change for bigcolor-spk-* configs Mychaela Falconia <falcon@freecalypso.org> parents: 65 diff changeset	1219 The Mother's plan is to conditionalize loudspeaker support on the firmware build
a2857b6c3d87 FC-handset-spec section 2.3.1: change for bigcolor-spk-* configs Mychaela Falconia <falcon@freecalypso.org> parents: 65 diff changeset	1220 configuration. Once we implement initial support for audio modes using RiViera
a2857b6c3d87 FC-handset-spec section 2.3.1: change for bigcolor-spk-* configs Mychaela Falconia <falcon@freecalypso.org> parents: 65 diff changeset	1221 Audio Service, our basic bigcolor-{gprs,vo} and smallbw configurations will
a2857b6c3d87 FC-handset-spec section 2.3.1: change for bigcolor-spk-* configs Mychaela Falconia <falcon@freecalypso.org> parents: 65 diff changeset	1222 support only handheld and headset modes, but not handfree. We will then later
a2857b6c3d87 FC-handset-spec section 2.3.1: change for bigcolor-spk-* configs Mychaela Falconia <falcon@freecalypso.org> parents: 65 diff changeset	1223 add new bigcolor-spk-* configurations whose purpose will be to support
a2857b6c3d87 FC-handset-spec section 2.3.1: change for bigcolor-spk-* configs Mychaela Falconia <falcon@freecalypso.org> parents: 65 diff changeset	1224 loudspeaker-equipped phone handset targets; these configurations will enable
a2857b6c3d87 FC-handset-spec section 2.3.1: change for bigcolor-spk-* configs Mychaela Falconia <falcon@freecalypso.org> parents: 65 diff changeset	1225 support for the hands-free loudspeaker mode (and will expect the loudspeaker
a2857b6c3d87 FC-handset-spec section 2.3.1: change for bigcolor-spk-* configs Mychaela Falconia <falcon@freecalypso.org> parents: 65 diff changeset	1226 and handfree audio mode to be available), and will also switch the ringtone
a2857b6c3d87 FC-handset-spec section 2.3.1: change for bigcolor-spk-* configs Mychaela Falconia <falcon@freecalypso.org> parents: 65 diff changeset	1227 generation mechanism from the buzzer to Melody E1 - see section 2.4.
56 a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1228
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1229 2.3.2. Headset inclusion or omission
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1230
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1231 The code supporting wired headset mode will always be included in the firmware,
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1232 however, there will be a hardware driver function call to inquire if a headset
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1233 is inserted or not. If the wired headset jack does not exist on a given target,
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1234 or more practically if it exists but we don't support it, this headset status
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1235 function will always return "no headset" indication, and the headset mode will
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1236 never be entered.
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1237
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1238 2.4. Ringtone generation
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1239
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1240 See section 1.8 for an overview of possible ways in which ringtone generation
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1241 may be accomplished. The only ring sound generation method supported by TI's
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1242 TCS211 version of their demo/prototype/PoC phone UI (the version for Calypso,
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1243 as opposed to other chipsets) is the original Calypso buzzer, i.e., Calypso
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1244 digital waveform output intended for switching a magnetic buzzer. The code that
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1245 rings this buzzer will execute successfully on every Calypso target, regardless
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1246 of whether it actually has a magnetic buzzer or not: if there is no buzzer and
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1247 Calypso BU/PWT output is left unconnected, like it is on our Luna platform, the
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1248 code will still run and emit the intended tone waveform on BU, but this output
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1249 will go nowhere and no audible sound will be made.
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1250
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1251 As a matter of project scope, in our FreeCalypso handset firmware we shall
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1252 support two configurations with regard to ringing:
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1253
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1254 1) TI's original buzzer configuration will be retained for lorekeeping and to
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1255 keep the door open for the possibility of a minimally usable FreeCalypso Lite
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1256 aftermarket firmware for Motorola C139.
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1257
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1258 2) For our own FC Libre Dumbphone handset, we will need to implement ringing by
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1259 way of the same loudspeaker that will be used for hands-free calls, using the
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1260 Melody E1 feature of Calypso DSP for ringtone melody generation.
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1261
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1262 2.4.1. Scope limitation on buzzer melodies
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1263
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1264 Because the option of ringing via Calypso buzzer output is retained only for
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1265 lorekeeping and for minimal-support alien targets, no effort will be expended
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1266 toward playing more musical melodies via the buzzer. Our current code (bugfixed
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1267 from TI's original) implements just one buzzer ringing sound, consisting of
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1268 alternating 800 Hz and 900 Hz tones, using BU mode rather than PWT, and the
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1269 Mother currently has no plans to implement anything more for the buzzer
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1270 configuration.
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1271
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1272 2.4.2. Melody E1 ringer
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1273
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1274 Our Melody E1 ringer implementation will require melody files in FFS, and we
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1275 will also have a separate audio mode (in the RiViera Audio Service sense) that
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1276 will be loaded during ringing. Even though the same physical loudspeaker will
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1277 be used for both hands-free calls and ringing, logically the two are separate
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1278 modes, and they will be treated as separate for the Audio Service. Separate
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1279 logical modes will provide separate volume files, which is the correct approach:
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1280 loudspeaker volume and ringing volume should be separate, just like how ringing
a39269dddca4 FC-handset-spec: firmware approach to audio routing and ringing Mychaela Falconia <falcon@freecalypso.org> parents: 55 diff changeset	1281 volume is entirely separate when a buzzer is used.
57 020e6428c248 FC-handset-spec: firmware approach to vibrating alert documented Mychaela Falconia <falcon@freecalypso.org> parents: 56 diff changeset	1282
020e6428c248 FC-handset-spec: firmware approach to vibrating alert documented Mychaela Falconia <falcon@freecalypso.org> parents: 56 diff changeset	1283 2.5. Vibrating alert
020e6428c248 FC-handset-spec: firmware approach to vibrating alert documented Mychaela Falconia <falcon@freecalypso.org> parents: 56 diff changeset	1284
020e6428c248 FC-handset-spec: firmware approach to vibrating alert documented Mychaela Falconia <falcon@freecalypso.org> parents: 56 diff changeset	1285 Our FC handset firmware will support both ringing and vibrating alert modes (as
020e6428c248 FC-handset-spec: firmware approach to vibrating alert documented Mychaela Falconia <falcon@freecalypso.org> parents: 56 diff changeset	1286 well as a ring+vibrate mode) on all targets. The vibrator will be modeled as a
020e6428c248 FC-handset-spec: firmware approach to vibrating alert documented Mychaela Falconia <falcon@freecalypso.org> parents: 56 diff changeset	1287 simple on/off control (no "analog" control of different vibration intensity
020e6428c248 FC-handset-spec: firmware approach to vibrating alert documented Mychaela Falconia <falcon@freecalypso.org> parents: 56 diff changeset	1288 levels, at least initially), and the vibrating alert code path will ultimately
020e6428c248 FC-handset-spec: firmware approach to vibrating alert documented Mychaela Falconia <falcon@freecalypso.org> parents: 56 diff changeset	1289 boil down to a driver function call for vibrator on/off. Therefore, if the
020e6428c248 FC-handset-spec: firmware approach to vibrating alert documented Mychaela Falconia <falcon@freecalypso.org> parents: 56 diff changeset	1290 vibrator does not exist on a given target, or if it exists but we don't know how
020e6428c248 FC-handset-spec: firmware approach to vibrating alert documented Mychaela Falconia <falcon@freecalypso.org> parents: 56 diff changeset	1291 to operate it, the on/off control function can be empty on that target, and the
020e6428c248 FC-handset-spec: firmware approach to vibrating alert documented Mychaela Falconia <falcon@freecalypso.org> parents: 56 diff changeset	1292 firmware will "vibrate" virtually.
020e6428c248 FC-handset-spec: firmware approach to vibrating alert documented Mychaela Falconia <falcon@freecalypso.org> parents: 56 diff changeset	1293
020e6428c248 FC-handset-spec: firmware approach to vibrating alert documented Mychaela Falconia <falcon@freecalypso.org> parents: 56 diff changeset	1294 On development boards such as FC Venus, the vibrator on/off function can turn a
020e6428c248 FC-handset-spec: firmware approach to vibrating alert documented Mychaela Falconia <falcon@freecalypso.org> parents: 56 diff changeset	1295 LED on and off to provide an indication of the UI layers making a vibrating
020e6428c248 FC-handset-spec: firmware approach to vibrating alert documented Mychaela Falconia <falcon@freecalypso.org> parents: 56 diff changeset	1296 alert.
59 3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1297
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1298 3. Venus development board
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1299
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1300 As of the summer of 2021, FreeCalypso handset development has reached a point
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1301 where a new development board is desired, to take the place of our current Luna
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1302 development platform. The newly planned FreeCalypso development board is
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1303 codenamed Venus, and it is envisioned as serving two goals:
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1304
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1305 1) Many of the hardware features intended for the ultimate FC handset product
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1306 as described in Chapter 1 can be prototyped on this Venus board;
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1307
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1308 2) The board will serve as the ideal firmware development platform, covering all
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1309 features and options that are listed in the previous chapter and defined as
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1310 being in scope for FC handset firmware.
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1311
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1312 The following sections spell out the design specification for this Venus
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1313 development board.
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1314
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1315 3.1. Build principle
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1316
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1317 The board will be built in the "hard" way, with the Calypso+Iota+RF chipset
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1318 implemented directly on the Venus board itself, as opposed to using a Tango
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1319 (iWOW TR-800) module. This approach is necessary because we need some Calypso
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1320 and Iota signals that are not brought out on TR-800:
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1321
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1322 1) We need Iota HSMICBIAS, HSMICP and HSO signals (the 3rd audio channel) in
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1323 addition to the primary and secondary audio channels, in order to prototype
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1324 section 1.7 hardware for the real handset, and in order to provide a proper
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1325 firmware development platform for section 2.3.
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1326
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1327 2) We need Calypso BU/PWT output so we can implement an old-fashioned buzzer,
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1328 which we need in order to develop and maintain firmware per section 2.4,
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1329 supporting both buzzer and Melody E1 ringing.
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1330
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1331 Once we have accepted that we have to bite the bullet and build our Venus board
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1332 in the "hard" way, we can also implement some other nice-to-have functions that
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1333 would have been deemed non-essential otherwise:
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1334
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1335 * We can bring out Calypso JTAG (which is not brought out on TR-800) like we did
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1336 on FCDEV3B. In the Mother's experience there is very little actual need for
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1337 Calypso JTAG, but it would be improper to omit this interface on a development
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1338 board when bringing it out is possible.
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1339
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1340 * With access to the internal ON_nOFF signal, we can implement a reliable
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1341 chipset-ON LED indicator, also like we did on FCDEV3B.
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1342
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1343 * We can implement both LPG and PWL LEDs like on the original D-Sample. Neither
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1344 LED is strictly needed for the handset firmware functional scope or for
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1345 prototyping toward the final handset; at least one LED is desired for the
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1346 purpose of indicating virtual vibrator on/off state, but similarly to other
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1347 considerations, it would be improper to pass up the opportunity to implement
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1348 both LEDs.
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1349
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1350 * Mostly unrelated to the handset project, falling instead into the realm of
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1351 general Calypso chipset knowledge recovery, I have wanted for a long time to
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1352 sniff the internal chip-to-chip VSP interface between Calypso and Iota - but
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1353 such feat cannot be accomplished on any currently existing hardware, as it's
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1354 an internal interface going from one BGA to another on PCB inner layers. If
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1355 we are building a new Calypso development board for other purposes, it would
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1356 be nifty to throw in a VSP tap header as well.
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1357
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1358 3.2. Purpose and scope
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1359
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1360 Aside from the logically unrelated VSP tap feature, our Venus board will be
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1361 intended for handset firmware development and handset hardware prototyping only.
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1362 It is not intended for non-handset directions of interest - for other interests
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1363 and purposes, use Caramel2 or FCDEV3B.
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1364
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1365 Calypso MCSI will not be available on FC Venus - in handset applications MCSI
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1366 pins are switched into GPIO mode, and we'll be using these GPIOs for LCD
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1367 backlight control on both Venus and the final handset. (Our current Luna
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1368 platform is likewise.) If you need MCSI, then you are doing modem work, not
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1369 handset, so use Caramel2 or FCDEV3B.
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1370
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1371 3.3. RF bands and PCB layout
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1372
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1373 The Mother's intent for the Venus board is to stop copying Openmoko's triband
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1374 PCB layout and instead switch to TI's original Leonardo+ quadband layout, which
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1375 has been recovered from iWOW TR-800 via professional PCB reverse engineering.
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1376 We will need quadband RF for the final FC Libre Dumbphone handset, thus it would
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1377 be best to switch to it now, starting with Venus.
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1378
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1379 3.4. Power supply arrangement
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1380
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1381 FC Venus will have the same orange Weidmuller power input connector as previous
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1382 TI and FreeCalypso development boards C-Sample, D-Sample, Leonardo, FCDEV3B and
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1383 Caramel2. Ready-made VBAT needs to be provided via this connector, fed directly
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1384 to the core chipset and to VBAT-powered peripherals, no on-board power
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1385 conversion. During development, operation with an AC-mains-powered fixed 3.6 V
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1386 DC supply is generally much more convenient than a real battery.
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1387
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1388 For development and testing of handset battery management in the firmware, and
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1389 for exercising the charging boot path in particular, Iota VCHG needs to be
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1390 brought out like it is on iWOW DSK and FC Caramel2 boards, to be connected with
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1391 a jumper wire to +5V pin on the DUART28 USB adapter whenever a "charger plugged"
69 c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1392 condition needs to be presented to the chipset. FC Venus will feature a 2x3 pin
c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1393 header with Iota BCI signals as follows:
c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1394
c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1395 VBATS VCCS
c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1396 PCHG VCHG
c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1397 ICTL GND
c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1398
c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1399 Please note that this planned BCI header pinout differs from iWOW DSK and FC
c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1400 Caramel2, which implement the following 2x4 pinout instead:
59 3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1401
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1402 ICTL VCCS
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1403 PCHG VCHG
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1404 ADIN2 ADIN1
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1405 GND GND
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1406
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1407 The Mother's approach to development and testing of higher-level UI functions
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1408 dealing with battery management is to use the BSIM feature of our FCHG driver,
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1409 in which case the board remains powered from a fixed DC supply (no actual
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1410 battery) and only VCHG needs to be connected. However, if a need arises to
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1411 connect an actual battery and an actual Iota-controlled charging circuit, it
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1412 will be possible: the battery will need to be connected to the orange power
3ead88660a4e FC-handset-spec: started Venus board description Mychaela Falconia <falcon@freecalypso.org> parents: 58 diff changeset	1413 input connector, and the control signals for the charging circuit will need to
69 c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1414 be connected to the 2x3 header.
c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1415
c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1416 The Mother's vision is that if and when we do need to exercise an actual Li-ion
c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1417 battery with an actual Iota-controlled charging circuit, we will need to build
c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1418 a separate battery+charger board that will connect to the power input and BCI
c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1419 control interfaces on the Venus board. That battery+charger board will feature
c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1420 an 18650 battery holder and a +5V charging power source connection, the charging
c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1421 current path (aside from BCI controls) will be contained entirely in that add-on
c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1422 board, whereas the battery power interface between Venus and the add-on board
c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1423 will carry only the load or discharge current.
c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1424
c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1425 The reasons for changing the BCI header pinout from iWOW DSK and FC Caramel2 to
c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1426 a different one for FC Venus are as follows:
c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1427
c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1428 * FC Tango (iWOW TR-800) module that forms the core of FC Caramel2 does not
c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1429 bring out Iota VBATS as a separate signal - instead it is connected to the
c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1430 VBAT supply inside the module. However, if the charging current measurement
c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1431 resistor will reside on a separate battery+charger board, then it would be
c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1432 most proper to connect both VBATS and VCCS to the two sides of this resistor,
c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1433 providing more accurate charging current measurement and CI control loop
c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1434 operation. Thus VBATS needs to be added to the BCI header.
c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1435
c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1436 * ADIN1 and ADIN2 won't be needed when using a common off-the-shelf 18650
c6dafe9f3ac2 FC-handset-spec: BCI header change on Venus Mychaela Falconia <falcon@freecalypso.org> parents: 68 diff changeset	1437 battery for prototyping - see section 1.10.1 for background information.
60 f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1438
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1439 3.5. LCD module and backlight
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1440
67 ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	1441 The Mother's original intent was to finalize the selection of LCD module for the
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	1442 actual handset before embarking on the detailed design (as in schematics, BOM
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	1443 and layout) of FC Venus, and to implement the final LCD and the final backlight
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	1444 circuit on the Venus board. However, because of the delay in KWH020ST23-F01 LCD
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	1445 testing caused by Digi-Key part backorder issues (see section 1.4.2), this plan
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	1446 is being modified slightly: the design of FC Venus board is being ungated on the
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	1447 bet that KWH020ST23-F01 LCD module will pass all necessary qualification tests,
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	1448 but this Venus board design won't be sent out to PCB fab until those LCD tests
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	1449 actually pass.
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	1450
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	1451 The backlight circuit design of section 1.4.4.1, which is hoped to be final, is
ed686a290f2d FC-handset-spec: LCD and backlight specification changes Mychaela Falconia <falcon@freecalypso.org> parents: 66 diff changeset	1452 being included in the Venus board design.
60 f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1453
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1454 3.6. Keypad buttons
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1455
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1456 The complex mechanical arrangement of keypad buttons that will be needed for the
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1457 real handset will NOT be done on the Venus board. Instead there will be a
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1458 simple 5x5 matrix of buttons in rows and columns, with silk screen labels
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1459 indicating the function of each button, matching D-Sample - the same arrangement
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1460 as on our current Luna platform. There will also be 3 out-of-matrix buttons for
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1461 PWON, RPWON and RESET.
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1462
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1463 There will be no keypad backlight on the Venus board. This secondary backlight
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1464 is not needed for firmware development, as it is not managed separately in our
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1465 fw architecture - instead its control will be absorbed into our R2D BLRR control
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1466 mechanism on the final handset where this backlight will be added.
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1467
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1468 3.7. Audio interfaces
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1469
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1470 Corresponding to the 3 audio channels of section 1.7, there will be 3 analog
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1471 audio interfaces on FC Venus: two TRRS jacks and one 2-pin header. These audio
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1472 interfaces will be as follows:
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1473
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1474 * The main audio channel (the one that will go to the built-in earpiece speaker
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1475 and mic in the real handset) will be wired to a TRRS jack exactly like on
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1476 Caramel2.
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1477
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1478 * The "official" headset channel (the one that will be a jack in the final
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1479 handset) will be wired to another identical TRRS jack. This other jack will
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1480 need plug insertion detection, signaled to a Calypso GPIO input.
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1481
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1482 * The output of the loudspeaker amplifier (see section 1,7.2) will be wired to
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1483 a 2-pin header exactly like on FCDEV3B, allowing the same 8 ohm lab bench
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1484 loudspeaker to be connected.
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1485
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1486 3.8. Magnetic buzzer
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1487
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1488 There will be a magnetic buzzer implemented directly on the Venus board itself
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1489 (not an externally attached component), exactly like on TI's D-Sample board.
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1490 This buzzer will be controlled by Calypso BU/PWT output in the canonical manner,
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1491 allowing the expected sounds to actually emanate when firmware operates the
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1492 old-fashioned Calypso buzzer output. See section 2.4 for the purpose of this
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1493 hardware provision.
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1494
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1495 3.9. LEDs instead of vibrator
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1496
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1497 There will be no vibrator on FC Venus - it is a mechanical function which cannot
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1498 be sensibly implemented on a development board meant for use on a lab bench.
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1499 Instead our Venus board will feature both LPG and PWL LEDs (i.e., LEDs
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1500 controlled by the respective Calypso outputs) exactly like D-Sample, and either
f0d9a2cf15d2 FC-handset-spec: Venus peripherals documented Mychaela Falconia <falcon@freecalypso.org> parents: 59 diff changeset	1501 of these LEDs can be used to simulate vibrator on/off state.
61 da5113856f3b FC-handset-spec: Venus DUART & CTL interfaces documented Mychaela Falconia <falcon@freecalypso.org> parents: 60 diff changeset	1502
da5113856f3b FC-handset-spec: Venus DUART & CTL interfaces documented Mychaela Falconia <falcon@freecalypso.org> parents: 60 diff changeset	1503 3.10. Host computer interface
da5113856f3b FC-handset-spec: Venus DUART & CTL interfaces documented Mychaela Falconia <falcon@freecalypso.org> parents: 60 diff changeset	1504
da5113856f3b FC-handset-spec: Venus DUART & CTL interfaces documented Mychaela Falconia <falcon@freecalypso.org> parents: 60 diff changeset	1505 The host interface model on FC Venus will need to follow that of section 1.12.
da5113856f3b FC-handset-spec: Venus DUART & CTL interfaces documented Mychaela Falconia <falcon@freecalypso.org> parents: 60 diff changeset	1506 More specifically, our Venus board will implement the mobile side of the "wall"
da5113856f3b FC-handset-spec: Venus DUART & CTL interfaces documented Mychaela Falconia <falcon@freecalypso.org> parents: 60 diff changeset	1507 between USB and mobile power domains, complete with all provisions of section
da5113856f3b FC-handset-spec: Venus DUART & CTL interfaces documented Mychaela Falconia <falcon@freecalypso.org> parents: 60 diff changeset	1508 1.12.2 for the mobile side, whereas the USB domain is already implemented on our
da5113856f3b FC-handset-spec: Venus DUART & CTL interfaces documented Mychaela Falconia <falcon@freecalypso.org> parents: 60 diff changeset	1509 DUART28 adapter board. The two domains will be interconnected with a ribbon
da5113856f3b FC-handset-spec: Venus DUART & CTL interfaces documented Mychaela Falconia <falcon@freecalypso.org> parents: 60 diff changeset	1510 cable in the FC Venus lab bench setup. The 10-pin DUART header will have our
da5113856f3b FC-handset-spec: Venus DUART & CTL interfaces documented Mychaela Falconia <falcon@freecalypso.org> parents: 60 diff changeset	1511 standardized FreeCalypso DUART pinout.
da5113856f3b FC-handset-spec: Venus DUART & CTL interfaces documented Mychaela Falconia <falcon@freecalypso.org> parents: 60 diff changeset	1512
da5113856f3b FC-handset-spec: Venus DUART & CTL interfaces documented Mychaela Falconia <falcon@freecalypso.org> parents: 60 diff changeset	1513 Also following the principal design of section 1.12.3, there will be a 3-pin
da5113856f3b FC-handset-spec: Venus DUART & CTL interfaces documented Mychaela Falconia <falcon@freecalypso.org> parents: 60 diff changeset	1514 header on the Venus board bringing out RPWON, nTESTRESET and GND, to be
da5113856f3b FC-handset-spec: Venus DUART & CTL interfaces documented Mychaela Falconia <falcon@freecalypso.org> parents: 60 diff changeset	1515 connected to the boot control header on DUART28C.
62 42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1516
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1517 4. Motorola C139 port
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1518
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1519 4.1. Background information
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1520
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1521 In FreeCalypso we have low-level support for the following alien targets:
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1522
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1523 * Motorola C11x/12x
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1524 * Motorola C139/140
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1525 * Motorola C155/156
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1526 * Pirelli DP-L10
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1527 * Sony Ericsson J100
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1528
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1529 Low-level support means that for all of these targets, we are able to build and
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1530 load a FreeCalypso firmware image that boots and runs without crashing, operates
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1531 the phone's GSM radio hardware in proper spec-compliant manner (transmissions
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1532 verified with a CMU200 RF tester), and allows control via AT commands and
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1533 FreeCalypso debug & development tools fc-shell, fc-tmsh and fc-fsio. However,
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1534 in this so-called "voice pseudo-modem" (VPM) operation, the phone's LCD stays
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1535 dark, the buttons do nothing, and there are no high-level functions of any kind,
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1536 only low-level control from the attached host computer.
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1537
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1538 It also just happens that in year 2015 I (Mother Mychaela) produced a firmware
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1539 version for Mot C139 that runs untethered, without host computer connection.
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1540 However, that untethered FC-on-C139 firmware was produced as a poor man's hack,
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1541 not as an end user offering! Here is the situation we were in: we did not
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1542 discover the existence of iWOW TR-800 (an extremely obscure Calypso module)
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1543 until December of 2019, thus for the 4 years between 2015 and 2019 we had no way
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1544 of running TI's TCS211 MFW+BMI (handset configuration) firmware in its proper
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1545 D-Sample config, which is 176x220 pixel color. But we knew that TI also had an
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1546 older C-Sample UI configuration (84x48 pixel B&W), thus out of poverty, for the
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1547 lack of proper development hardware, we resurrected that old C-Sample UI config
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1548 (at first it wouldn't even compile) and got it running on Mot C139 hardware -
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1549 possible because that 84x48 pixel UI was small enough to fit into Motorola's
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1550 96x64 pixel LCD.
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1551
63 4389cd2b9d02 FC-handset-spec: grammar fix Mychaela Falconia <falcon@freecalypso.org> parents: 62 diff changeset	1552 To be clear, I never considered this hacky FC-on-C139 port to be an acceptable
62 42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1553 substitute or replacement for my real goals of first getting TI's TCS211 UI up
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1554 and running in its proper 176x220 pixel color configuration, and then producing
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1555 a FreeCalypso handset that can replace the proprietary Pirelli DP-L10. However,
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1556 a peculiar situation has arisen: we now know that it is possible to transform
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1557 Motorola C139 into a sort of Libre Dumbphone Lite with aftermarket FreeCalypso
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1558 firmware, and it is clear that some users will prefer this "liberated C139"
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1559 option over the Mother's desired FC Libre Dumbphone handset - probably for
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1560 reasons of cost more than anything, as our FC phone will likely end up costing
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1561 thousands of dollars. The rest of this chapter will explore the possibility of
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1562 practically usable FreeCalypso handset firmware on Mot C139 hardware.
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1563
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1564 4.2. Why C139?
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1565
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1566 As a matter of general principle, we could probably get our FreeCalypso Lite
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1567 firmware running on all or most of the 5 alien targets listed in section 4.1.
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1568 However, the level of usability and the set of user-available features on the
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1569 other 4 would only be worse than what we would get on C139, thus if someone is
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1570 looking for a pre-existing phone hw unit to convert to FreeCalypso Lite, then
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1571 C139 is the best choice in terms of outcome quality.
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1572
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1573 It is particularly worthy of note that if we were to get FreeCalypso Lite
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1574 firmware running on Pirelli DP-L10 (it hasn't been tried as of this writing,
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1575 but it is likely possible), the result would be not only much much worse in
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1576 functionality than Pirelli's official firmware or the Mother's desired full FC
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1577 handset, but actually even worse than the same FreeCalypso Lite firmware running
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1578 on Motorola C139! Therefore, even though the Pirelli phone serves as the
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1579 Mother's inspiration for our own FC handset hardware, the existing Pirelli
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1580 hardware is mostly useless for the purpose of turning it into a libre phone -
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1581 all because of the vast amount of completely undocumented hardware in this
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1582 model.
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1583
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1584 4.3. How to make it happen
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1585
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1586 The main reason why a practically usable FC firmware version for Mot C139 has
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1587 not been produced yet is because I, Mother Mychaela, am not willing to do it in
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1588 such a way that would jeopardize my primary goal of true FC handset hardware.
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1589 I am willing to support FreeCalypso Lite on C139 as a side addition to the
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1590 main FC handset hardware goal, but never as a replacement.
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1591
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1592 Right now my next project goal is to build my desired Venus development board.
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1593 Once that board is built, we will be in a better position to whip our TI-based
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1594 FC handset firmware into shape. No, my priorities won't change, and my initial
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1595 work on the Venus platform will be on the bigcolor firmware configuration.
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1596 However, once FC Tourmaline bigcolor firmware runs on FC Venus in a satisfactory
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1597 manner, with audio mode conversion implemented but still using the Calypso
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1598 buzzer for ringing, then it may be a good time to bring the smallbw
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1599 configuration up to par. And once FC Tourmaline smallbw runs in an end-user-
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1600 acceptable manner on FC Venus, then it will be a slam dunk to move it to actual
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1601 C139 hardware.
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1602
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1603 4.4. Functional scope limitations
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1604
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1605 Because FC Lite on Mot C139 can only ever be a side project and can never be my
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1606 main goal, I have to put some strict limits on the amount of work I am going to
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1607 do in that direction:
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1608
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1609 * The color capability of C139 physical LCD will not be used by FC Lite
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1610 firmware, instead the screen of FC-on-C139 will always be black&white. The
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1611 reason for this limitation is that displaying color on C139 would involve
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1612 actual work (a non-trivial amount of it) to create an entirely new "small
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1613 color" UI configuration (as opposed to the existing bigcolor and smallbw),
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1614 whereas the existing smallbw config is a freebie gift from TI.
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1615
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1616 * No musical ringtones, just one extremely basic ringing sound - implementing
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1617 musical ringtones for the buzzer would be C139-specific work which is not
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1618 needed for the main goal of FC Libre Dumbphone, which will use Melody E1
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1619 ringing instead.
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1620
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1621 * No support for actual headsets in the headset jack! The headset jack on all
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1622 Mot C1xx phones serves a dual function, it is both an analog headset interface
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1623 and a digital interface for computer connection (UART at 2.8V logic levels),
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1624 and in FreeCalypso we absolutely require the computer interface function of
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1625 this jack - it is essential for development and debugging. Therefore, the
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1626 "ordinary end user" function of the headset jack is lost.
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1627
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1628 In summary, FreeCalypso Lite on Motorola C139 will be an extremely basic and
42d53bfbcca3 FC-handset-spec: Mot C139 idea documented Mychaela Falconia <falcon@freecalypso.org> parents: 61 diff changeset	1629 "bare bones" phone - but the hope is that it would still be useful to some.

FreeCalypso > hg > freecalypso-docs

annotate FC-handset-spec @ 75:c458b7159fbd