FreeCalypso > hg > freecalypso-hwlab
annotate doc/FTDI-EEPROM-tools @ 61:3940292ad76f
calypso-jtag: finally got some breakthrough
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 23 Jun 2019 01:08:01 +0000 |
parents | 311c800268b8 |
children | 0514e3520be3 |
rev | line source |
---|---|
45
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
1 Mother Mychaela has developed a set of Linux command line tools for manipulating |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
2 configuration EEPROMs that are attached to FT2232x devices and accessed in-band |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
3 via USB. This document describes these tools. |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
4 |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
5 Supported FTDI chips and EEPROMs |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
6 ================================ |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
7 |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
8 The present tools work with 93C46, 93C56 and 93C66 EEPROMs attached behind |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
9 FT2232x dual-channel UART/FIFO/MPSSE/etc chips, both FT2232C/D and FT2232H. |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
10 We can read these EEPROMs for examination or backup, and we can program them |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
11 with new bits, either restoring a previously saved backup or creating a new |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
12 from-scratch configuration. These EEPROM configurations (which we can save, |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
13 restore or create from scratch) set the USB VID:PID and the textual strings |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
14 naming the manufacturer, the product model and an optional serial number, |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
15 select whether each FT2232x channel will come up in the default UART mode or |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
16 one of the other EEPROM-configurable modes (245 FIFO, CPU-style FIFO or fast |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
17 opto-isolated serial), and allow a few other obscure chip settings to be |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
18 tweaked. |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
19 |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
20 Some work has also been done toward the goal of being able to program the |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
21 internal EEPROM in FT232R chips (a very popular single-channel USB to UART |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
22 converter needing no external components), but this work has not been finished |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
23 yet, and the present tools should NOT be used to attempt an EEPROM write on |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
24 that chip - the risking of bricking the chip is too high. |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
25 |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
26 More generally, our fteeprom-read tool should be able to read out the EEPROM |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
27 content from just about any FTDI chip including FT232R, whereas our |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
28 fteeprom-prog tool should be able to program a user-supplied set of bits into |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
29 any FTDI+EEPROM combo where the EEPROM is a separate chip - but it is NOT safe |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
30 to use on FTDI chips like FT232R or FT-X that have their EEPROM built in. |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
31 Furthermore, if the goal is to generate a new EEPROM config from scratch, as |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
32 opposed to restoring a saved backup, we currently have generators only for |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
33 FT2232C/D and for FT2232H. (We also have a generator program for FT232R, but |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
34 it is of no use for as long as fteeprom-prog is not safe to use on FT232R |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
35 chips.) |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
36 |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
37 libftdi dependency |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
38 ================== |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
39 |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
40 We use libftdi (which is in turn layered on libusb) to issue the special USB |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
41 control pipe commands to FTDI chips which are needed to read and write their |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
42 EEPROMs. We use old-style libftdi-0.x (-lftdi on the link line) as opposed to |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
43 libftdi1 (-lftdi1) because the new versions took away the ability to write to |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
44 the EEPROM directly with ftdi_write_eeprom_location() calls, forcing users to |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
45 go through libftdi1's own EEPROM smarts, which we don't want to do - our tools |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
46 are all about more direct user empowerment at the lowest level. |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
47 |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
48 Selecting the device to operate on |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
49 ================================== |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
50 |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
51 Our fteeprom-read, fteeprom-prog and fteeprom-erase tools take a device selector |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
52 argument, selecting the device to operate on. This required argument is the |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
53 string to be passed to the ftdi_usb_open_string() function in libftdi, allowing |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
54 the device to be operated on to be selected in one of several ways. Copying |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
55 from libftdi documentation, the available formats are: |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
56 |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
57 d:<devicenode> - path of bus and device-node (e.g. "003/001") within usb device |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
58 tree (usually at /proc/bus/usb/) |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
59 |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
60 i:<vendor>:<product> - first device with given vendor and product id, ids can |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
61 be decimal, octal (preceded by "0") or hex (preceded by "0x") |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
62 |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
63 i:<vendor>:<product>:<index> - as above with index being the number of the |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
64 device (starting with 0) if there are more than one |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
65 |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
66 s:<vendor>:<product>:<serial> - first device with given vendor id, product id |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
67 and serial string |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
68 |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
69 If you have only one FTDI device connected to your PC or laptop at the time of |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
70 your EEPROM manipulation session (generally a good idea to avoid hitting the |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
71 wrong device by mistake) and if that FTDI device has some sensible starting |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
72 USB VID:PID (either from the previous EEPROM config or the chip's sans-EEPROM |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
73 default) that doesn't clash with anything else, then the i: form will probably |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
74 be the most convenient, e.g.: |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
75 |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
76 i:0x0403:0x6001 for single-channel FT232x devices running with the default ID |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
77 i:0x0403:0x6010 for dual-channel FT2232x devices running with the default ID |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
78 i:0x0403:0xPPPP for custom PIDs assigned out of FTDI's VID range |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
79 i:0xVVVV:0xPPPP for totally custom USB IDs |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
80 |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
81 Or if the current device config is totally hosed (the EEPROM has a passing |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
82 checksum, but sets some completely bogus USB ID), then the d: form will |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
83 probably be required for recovery. |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
84 |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
85 Reading the EEPROM |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
86 ================== |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
87 |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
88 The basic EEPROM read command is as follows: |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
89 |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
90 fteeprom-read <device-selector> |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
91 |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
92 See the previous section for the device selector argument. In this default |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
93 form the tool will read the first 64 EEPROM words, which is appropriate for |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
94 93C46 external EEPROMs or for the internal 1024-bit EEPROM in the FT232R chip. |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
95 However, if you are working with an FT2232x board with an external EEPROM and |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
96 that EEPROM is of a larger variety (93C56 or 93C66), this basic form with give |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
97 you an incomplete (truncated) read, and you will need one of the following |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
98 extended forms to read the complete EEPROM: |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
99 |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
100 fteeprom-read -b <device-selector> -- read 128 EEPROM words (93C56) |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
101 fteeprom-read -B <device-selector> -- read 256 EEPROM words (93C66) |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
102 |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
103 (If you use one of the extended forms on a smaller EEPROM, you will get 2 or 4 |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
104 copies of the same bits.) |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
105 |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
106 The output of fteeprom-read is in the same format as the input to fteeprom-prog, |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
107 thus you can redirect the output to a file and get a restorable backup copy of |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
108 your EEPROM. |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
109 |
49
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
110 It also needs to be noted that if the FTDI device has the kernel's ftdi_sio |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
111 driver attached to it (ttyUSB device present) when you run fteeprom-read (same |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
112 for fteeprom-prog and fteeprom-erase), the act of running any of our EEPROM |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
113 tools will cause it to unbind, i.e., the ttyUSB device will disappear. If the |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
114 device being operated on is a dual-channel FT2232x, then only the ttyUSB device |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
115 corresponding to Channel A will disappear, while the Channel B ttyUSB device |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
116 will stay. |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
117 |
45
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
118 Programming the EEPROM |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
119 ====================== |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
120 |
49
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
121 In terms of the primitives provided over USB, writing to EEPROMs sitting behind |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
122 FTDI chips is accomplished by writing one 16-bit word at a time: the |
45
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
123 SIO_WRITE_EEPROM_REQUEST command writes a user-supplied word at a user-supplied |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
124 EEPROM address. However, our fteeprom-prog tool currently supports only writing |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
125 complete EEPROMs (64 or 128 or 256 16-bit words starting at address 0) and we |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
126 do not currently provide any kind of "random access write" utility; the primary |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
127 reason for this design decision is practical usefulness: FTDI's EEPROM structure |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
128 includes a checksum over the first 64 words for 1024-bit EEPROMs or over the |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
129 first 128 words for larger ones, and if this checksum fails to match, the entire |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
130 structure is deemed to be invalid - hence there is no practical use case for |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
131 selectively rewriting individual words. The only exception may be with 93C66 |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
132 EEPROMs: on these giants only the first half would be subject to the checksum, |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
133 and the second half could be used arbitrarily. However, we have not yet |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
134 encountered any boards out in the wild with such big EEPROMs, and we have no |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
135 plans to use such in any of our own hardware designs either, hence there is no |
1f3a4115375f
doc/FTDI-EEPROM-tools: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
136 business case at the present moment to develop tooling support for them. |
49
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
137 |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
138 There are two primary modes of usage for our fteeprom-prog tool: restoring a |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
139 saved EEPROM backup or writing a new EEPROM config which you generate yourself. |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
140 To restore a saved EEPROM backup, run the tool as follows: |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
141 |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
142 fteeprom-prog <device-selector> <eeprom-image-file> |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
143 |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
144 To program a new EEPROM config of your own, run a pipeline of this form: |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
145 |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
146 <generator-tool> | fteeprom-prog <device-selector> |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
147 |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
148 fteeprom-prog reads the EEPROM image from stdin if no image file is named on |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
149 the command line; the image format is the same in both cases, and the length of |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
150 this EEPROM image tells the tool how many words need to be programmed - there |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
151 are no -b or -B options to fteeprom-prog. |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
152 |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
153 Generator tools |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
154 =============== |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
155 |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
156 Unfortunately FTDI never documented the format of their EEPROM configuration |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
157 structure - apparently they consider it a proprietary trade secret just like |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
158 the wire protocol spoken over USB between their chips and their closed-source |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
159 proprietary drivers. All FOSS community support for these chips is based on |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
160 reverse engineering, and that includes the EEPROM format. |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
161 |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
162 The present suite of tools includes ftee-gen2232c and ftee-gen2232h EEPROM image |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
163 generators, meant for use with FT2232C/D and FT2232H chips, respectively. These |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
164 tools are based on the knowledge extracted from other (pre-existing) community |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
165 tools, primarily the EEPROM config code built into various libftdi versions - |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
166 we haven't done any FTDI RE of our own, instead the goal of this project has |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
167 been to create a set of tools that are better fit for production use. |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
168 |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
169 Our ftee-gen2232c and ftee-gen2232h tools are invoked as follows: |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
170 |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
171 ftee-gen2232[ch] [-b|-B] <config-file> [serial-num] |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
172 |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
173 The output of these generator tools is meant to be piped directly into |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
174 fteeprom-prog. |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
175 |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
176 The philosophy of which settings are given in the config file vs. which ones |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
177 are given on the command line reflects configuration management and factory |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
178 production line operations. In the envisioned usage there would be a config |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
179 file for each product, giving the USB VID:PID, textual manufacturer and product |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
180 ID strings and possibly other config settings which need to be changed from the |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
181 defaults, but the optional serial number string is given on the command line |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
182 because it would be different for each individual unit being programmed. |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
183 |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
184 The EEPROM size selection is also made on the command line, so that the same |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
185 config can be programmed into a smaller EEPROM or a bigger one. By default our |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
186 tools generate an image suitable for a 93C46 EEPROM: the generated image is 64 |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
187 words long, with a checksum in word 63, and the EEPROM type byte in FTDI's |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
188 structure is set to 0x46. Running with -b produces an image for a 93C56 EEPROM: |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
189 the EEPROM type byte is set to 0x56, and the checksum-covered image length is |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
190 extended to 128 words. Finally, -B sets things up for a 93C66 EEPROM: the |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
191 EEPROM type byte is set to 0x66, but the generated checksum-covered image is |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
192 still 128 words long just like with -b, as that is what FT2232x chips apparently |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
193 expect. I said "apparently" because I don't have any FT2232x hardware with |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
194 93C66 EEPROMs and I don't plan on acquiring or building any, hence this minimal |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
195 93C66 support is completely untested - use at your own risk. |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
196 |
51
311c800268b8
doc/FTDI-EEPROM-tools: added note about bigger EEPROMs
Mychaela Falconia <falcon@freecalypso.org>
parents:
49
diff
changeset
|
197 It also needs to be noted that with our current RE-based understanding of FTDI's |
311c800268b8
doc/FTDI-EEPROM-tools: added note about bigger EEPROMs
Mychaela Falconia <falcon@freecalypso.org>
parents:
49
diff
changeset
|
198 undocumented EEPROM structure, using a bigger EEPROM does NOT provide more room |
311c800268b8
doc/FTDI-EEPROM-tools: added note about bigger EEPROMs
Mychaela Falconia <falcon@freecalypso.org>
parents:
49
diff
changeset
|
199 for strings: all that happens with -b and -B options is that a gap of 64 unused |
311c800268b8
doc/FTDI-EEPROM-tools: added note about bigger EEPROMs
Mychaela Falconia <falcon@freecalypso.org>
parents:
49
diff
changeset
|
200 EEPROM words is inserted between the end of the fixed structure and the |
311c800268b8
doc/FTDI-EEPROM-tools: added note about bigger EEPROMs
Mychaela Falconia <falcon@freecalypso.org>
parents:
49
diff
changeset
|
201 beginning of strings. The exact same arrangement has been observed in all 93C56 |
311c800268b8
doc/FTDI-EEPROM-tools: added note about bigger EEPROMs
Mychaela Falconia <falcon@freecalypso.org>
parents:
49
diff
changeset
|
202 EEPROM images found in the wild, presumably produced with FTDI's official tools, |
311c800268b8
doc/FTDI-EEPROM-tools: added note about bigger EEPROMs
Mychaela Falconia <falcon@freecalypso.org>
parents:
49
diff
changeset
|
203 including FTDI's own USB-COM232-PLUS2 board - thus it is not clear at all if |
311c800268b8
doc/FTDI-EEPROM-tools: added note about bigger EEPROMs
Mychaela Falconia <falcon@freecalypso.org>
parents:
49
diff
changeset
|
204 FT2232x chips actually support longer strings with bigger EEPROMs, and if not, |
311c800268b8
doc/FTDI-EEPROM-tools: added note about bigger EEPROMs
Mychaela Falconia <falcon@freecalypso.org>
parents:
49
diff
changeset
|
205 what does one need a bigger EEPROM for... |
311c800268b8
doc/FTDI-EEPROM-tools: added note about bigger EEPROMs
Mychaela Falconia <falcon@freecalypso.org>
parents:
49
diff
changeset
|
206 |
49
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
207 For the format of config files read by our ftee-gen2232[ch] tools and what |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
208 settings can be tweaked, read the source code. |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
209 |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
210 Erasing the EEPROM (making it blank) |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
211 ==================================== |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
212 |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
213 If you are playing with a "generic" FT2232x breakout board that is made for |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
214 tinkering, as opposed to a more finished product, such boards are typically |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
215 shipped with their EEPROMs completely blank. In that case restoring the EEPROM |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
216 to its "pristine" state after playing around would mean erasing it, i.e., |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
217 bringing it into a blank (all ones) state. FT2232x chips provide two ways to |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
218 do so: one can explicitly write 0xFFFF into each individual EEPROM word with |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
219 SIO_WRITE_EEPROM_REQUEST, or one can send a SIO_ERASE_EEPROM_REQUEST command to |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
220 the chip, and the chip then erases the entire EEPROM. But we don't know how |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
221 the latter SIO_ERASE_EEPROM_REQUEST operation is implemented by FT2232x chips: |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
222 does the FT2232x chip go through and erase each word individually, or does it |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
223 issue an "erase full chip" opcode to the serial EEPROM? If the latter, then |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
224 according to some EEPROM datasheets that operation may not work if the EEPROM |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
225 is powered from a 3.3V rail rather than the full USB 5V - may be an issue in |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
226 FT2232H-based designs. |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
227 |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
228 In any case our tools provide both ways. To perform the "automatic full chip |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
229 erase" operation, run the following command: |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
230 |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
231 fteeprom-erase <device-selector> |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
232 |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
233 To blank the EEPROM by writing 0xFFFF into each word, run one of the following |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
234 pipelines: |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
235 |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
236 ftee-mkblank | fteeprom-prog <device-selector> -- blank a 93C46 EEPROM |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
237 ftee-mkblank -b | fteeprom-prog <device-selector> -- blank a 93C56 EEPROM |
b2e9a6f3c833
doc/FTDI-EEPROM-tools: document finished
Mychaela Falconia <falcon@freecalypso.org>
parents:
45
diff
changeset
|
238 ftee-mkblank -B | fteeprom-prog <device-selector> -- blank a 93C66 EEPROM |