FreeCalypso > hg > freecalypso-hwlab

annotate doc/LCD-backlight-driver @ 116:c8685074c845

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
fc-simtool command parser: fancier handling of quoted strings
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 28 Jan 2021 03:14:32 +0000
parents b1b027efce8e
children
Ignore whitespace changes - Everywhere: Within whitespace: At end of lines:
rev   line source
70
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
1 I, Mother Mychaela, have a deep desire to build my own GSM cellphone handset
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
2 that would serve as a published-source replacement for my current Pirelli
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
3 DP-L10, which is laden with unwanted and undocumented extra non-GSM components
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
4 and for which there are no schematics. I already know what kind of display I
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
5 wish to use in my dream FreeCalypso Libre Dumbphone: a 2.0" 176x220 pixel TFT
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
6 color LCD, strictly transmissive, requiring a backlight - same principal class
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
7 of LCD as in the Pirelli DP-L10, but stepping up in size from Pirelli's 128x128
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
8 to 176x220 pixels. There are many vendors who make suitable LCD modules, and
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
9 there are two specific candidate modules already in use at FreeCalypso HQ as
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
10 part of various prototype rigs.
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
11
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
12 The backlight is implemented in exactly the same way on all candidate 2.0"
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
13 176x220 pixel TFT LCD modules I have looked at: it consists of 3 white LEDs,
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
14 joined together either at the anode or at the cathode, with the opposite
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
15 terminal brought out separately for each of the 3 LEDs, supporting an
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
16 arrangement where the 3 LEDs are driven in parallel rather than in series.
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
17 Each of the 3 LEDs needs to have about 15 mA flowing through it for maximum
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
18 display brightness; lower LED currents will produce lower display brightness,
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
19 but going significantly above 15 mA would be bad - too much current would burn
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
20 out the LEDs.
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
21
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
22 Exactly how should this backlight be driven in our FreeCalypso Libre Dumbphone
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
23 design? In this article I am going to look at some obvious and less obvious
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
24 ways to drive backlight LEDs, and then present my own novel way (novel in that
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
25 I haven't seen it used in any existing design or seen it recommended anywhere)
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
26 which has already been implemented on our current Luna development platform.
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
27
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
28 The trivial way: VBAT and series resistors
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
29 ==========================================
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
30
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
31 The most trivial way to drive a backlight LED or a parallel group of such LEDs
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
32 in a mobile phone whose ultimate power source is a single-cell Li-ion battery
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
33 would be to put a current limiting resistor in series with each LED, and then
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
34 connect each LED+resistor set between VBAT and GND, i.e., across battery
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
35 terminals. (Of course a transistor would also need to be inserted somewhere to
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
36 act as on/off switch, turning the backlight on only when it is needed.)
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
37
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
38 With this trivial arrangement the value of the series resistors (one in series
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
39 with each LED) would need to be calculated as follows:
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
40
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
41 R = (VBAT_max - Vled) / Iled_max
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
42
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
43 where VBAT_max is the maximum allowed battery voltage (4.2 V for typical Li-ion
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
44 batteries), Vled is the voltage drop across a backlight LED, and Iled_max is the
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
45 maximum current that should ever flow through each individual LED.
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
46
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
47 The big problem with this trivial LED driver approach is that the display
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
48 backlight will glow at its maximum brightness only when the battery is at its
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
49 peak charge, and will dim as the battery discharges. Why so? The series
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
50 resistor value would need to be set per the equation above in order to avoid
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
51 damage to the backlight LEDs (the current through each LED must not exceed
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
52 Iled_max at the highest battery voltage), but then as the battery discharges,
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
53 the voltage across each LED series resistor will decline (VBAT - Vled, with
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
54 Vled assumed to be constant), and the current through the resistor (and thus
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
55 through the LED as well) will decline proportionally.
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
56
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
57 How do LCD backlights in mainstream commercial phones behave in this regard?
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
58 I have a disassembled Pirelli DP-L10 phone (bare motherboard with the LCD and
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
59 the keypad still attached) which I have hacked up to be powered by a lab bench
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
60 power supply instead of the usual battery, and I did an experiment with it: I
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
61 powered up this Pirelli motherboard with my bench supply, running Pirelli's
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
62 original firmware, I got it into a state where both LCD and keypad backlights
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
63 are on (press any keypad button to turn them back on when the fw turns them off
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
64 by timeout), I turned the voltage knob on the power supply up and down, and I
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
65 observed the brightness of both LCD and keypad backlights.
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
66
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
67 Observation: Pirelli's keypad backlight does get noticeably brighter or dimmer
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
68 as VBAT goes up and down, indicating that they do use the trivial driver circuit
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
69 for this one (from fw perspective, Pirelli's keypad backlight is driven or at
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
70 least controlled with Iota LED-B), but the LCD brightness stays exactly the same
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
71 as VBAT ranges from the 4.2 V Li-ion maximum to the low-battery emergency
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
72 shut-off voltage (about 2.8 V) at which the Iota VRPC block involuntarily shuts
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
73 down the entire Calypso subsystem.
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
74
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
75 It is not clear exactly how Pirelli's LCD backlight driver circuit is
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
76 implemented. There is a component on their motherboard near the LCD connector
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
77 marked as A3-90E - it might be the LED driver - and there is another little
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
78 component next to it that looks like an inductor, suggesting some kind of boost
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
79 converter. There is no documentation for Pirelli's Giantplus GPM526A0 LCD
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
80 module, but it seems to have just two wires for the backlight, suggesting that
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
81 the two backlight LEDs (this LCD module has 2 backlight LEDs rather than 3) may
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
82 be wired in series (not parallel), in which case a boost converter would be
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
83 absolutely required.
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
84
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
85 Boost to 5V, then fixed series resistors
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
86 ========================================
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
87
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
88 The available schematics for Motorola C139 and C155 phones depict an LCD
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
89 backlight driver circuit that seemed bizarre to me at first: they take VBAT,
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
90 boost it up to constant 5V with a step-up charge pump (RT9361A on C139
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
91 schematics, REG710NA-5 on C155 schematics), and feed that 5V to their LCD
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
92 module, which presumably expects fixed 5V backlight power and internally
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
93 contains a fixed resistor in series with each LED.
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
94
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
95 This approach certainly accomplishes the goal of constant LCD backlight
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
96 brightness irrespective of battery state of charge, but it does so at a huge
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
97 cost in terms of efficiency. Both RT9361A and REG710NA-5 are step-up charge
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
98 pumps, and they work by doubling the current draw. If we were to use the same
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
99 arrangement for our LCD backlight (3 LEDs, each needing 15 mA), then for 45 mA
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
100 of current flowing through the LEDs, 90 mA will be drawn from the battery.
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
101 These are not "smart" boost converters that draw less input current as their
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
102 input voltage goes up (for same I*V power), instead the input current is an
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
103 almost constant 2x the output current, thus the overall efficiency gets very
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
104 poor at higher battery voltages.
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
105
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
106 I strongly dislike this approach for its wastefulness, hence I sought another
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
107 way.
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
108
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
109 My novel 3.5V LDO approach
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
110 ==========================
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
111
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
112 Datasheets for the LCD modules I am working with specify the drop voltage across
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
113 each of the 3 backlight LEDs as 3.2V. The table of battery voltage thresholds
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
114 (mapping VBAT to battery state of charge percentages) inside Pirelli's firmware
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
115 (located and extracted via thorough reverse eng) has these mappings at the lower
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
116 end:
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
117
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
118 3719 20
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
119 3688 15
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
120 3663 10
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
121 3539 5
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
122 3370 0
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
123
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
124 These numbers make it clear that a battery voltage around 3.5 to 3.6 V means
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
125 that the battery is near empty; combining this "low battery" number with the
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
126 datsheet-stated LED drop voltage of 3.2 V gave me this idea: what if we feed
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
127 VBAT to a 3.5V LDO regulator and use this LDO output as the backlight power
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
128 source, with the LED series resistor values computed for 3.5 V supply? This
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
129 approach would produce constant LCD brightness for the wide VBAT range from
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
130 just above 3.5 V (the LDO regulator's dropout is very low) to 4.2 V or above,
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
131 without doubling the current draw (for 45 mA flowing through the LEDs,
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
132 approximately the same 45 mA will be drawn from the battery), with the only
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
133 anticipated penalty being a possible sharp drop-off in LCD brightness when the
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
134 battery gets critically low.
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
135
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
136 When I was designing my FC Luna UI development platform (an LCD add-on to the
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
137 existing historical third-party Caramel board), I sought to test this idea
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
138 empirically. But before actually building this Luna LCD board, I fortunately
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
139 had the foresight to measure the actual voltage drop across the backlight LEDs,
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
140 rather than blindly rely on the datasheet spec of 3.2 V. Back in 2018 I had
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
141 tested my chosen LCD modules in a standalone environment without Calypso: I had
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
142 them switched into 8-bit microprocessor bus interface mode (IM0 pin strapping)
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
143 and I drove them with an FT2232D adapter using FTDI's MCU host bus emulation
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
144 mode. I still have the two hardware setups (LCD modules from two different
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
145 vendors) I had put together back then; the backlight power source in these
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
146 setups is USB 5V, with 110 or 120 ohm LED series resistors. I took the one
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
147 setup on which the point between each LED cathode and the connected series
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
148 resistor is easily accessible for probing, and I measured the voltage at that
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
149 point, to see how the overall 5V gets split between the drop across the LED and
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
150 the drop across the resistor.
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
151
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
152 The answer was somewhat unexpected: the voltage drop across each LED turned out
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
153 to be somewhere around 2.9 V, as opposed to the 3.2 V datasheet number. This
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
154 difference in the LED forward drop voltage does highlight one major weakness of
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
155 my close-to-Vled LDO approach: by setting the backlight fixed voltage so close
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
156 to the expected forward drop voltage of the actual LEDs, I am making my circuit
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
157 extremely sensitive to slight variations in that forward drop voltage. If I
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
158 had populated LED series resistors on my Luna LCD board based on the 3.2 V
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
159 assumption (assuming 300 mV drop across each resistor), then the current flowing
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
160 through the LEDs would be double of my design intent (with Vled = 2.9 V, the
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
161 voltage drop across each resistor becomes 600 mV), possibly burning out the
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
162 LEDs! In contrast, a circuit in which each LED+resistor set is driven with a
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
163 much higher voltage (meaning a larger voltage drop across the resistor and a
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
164 larger resistor value) is much less sensitive to variations in Vled, producing
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
165 much less resulting variation in Iled.
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
166
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
167 I ended up building my Luna LCD board with my 3.5V LDO backlight LED driver
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
168 circuit intact, but I populated 38.3 ohm series resistors instead of my
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
169 originally intended 20 ohm value. The resulting circuit works well in practice:
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
170 the LDO puts out a very precise 3.5 V for any higher VBAT input, the LCD
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
171 backlight is bright and visually pleasing, the measured voltage drop across the
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
172 resistors with the backlight on is right about 600 mV, meaning that the 2.9 V
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
173 LED forward drop voltage hasn't changed, and the current flowing through each
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
174 LED is in the desired 15-16 mA target range. The LDO regulator's enable input
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
175 also conveniently serves as the backlight on/off control, driven by Calypso
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
176 GPIO 9 in the complete Luna setup. (Calypso MCSI is used only in modem configs,
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
177 not in handset configs, thus MCSI pins become GPIOs in the latter, available for
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
178 functions like LCD backlight control.)
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
179
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
180 I then set out to test what happens when the VBAT input to my Luna LCD backlight
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
181 driver falls below 3.5 V. At lower voltages the LDO regulator becomes
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
182 essentially a pass-through, with the low battery voltage applied almost directly
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
183 to each LED+resistor set. The current flowing through the LEDs falls
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
184 accordingly, but the question to be answered was what happens to the visual
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
185 readability of the LCD. The answer turned out to be very positive: I set my
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
186 VBAT-generating lab bench power supply as low as 2.8 V (the emergency shut-off
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
187 voltage for Iota VRPC), and while the display naturally gets very dimmed, it is
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
188 still readable! This finding tells us that my 3.5V LDO approach does not
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
189 present the problem I was afraid of (the display going totally dark in
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
190 critically low battery scenarios when the rest of the phone still has some life
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
191 left), and the only remaining concern with this approach is the extremely high
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
192 sensitivity to variations in LED forward drop voltage.
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
193
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
194 Where to go from here
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
195 =====================
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
196
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
197 If I ever get as far as actually building my desired FreeCalypso dream phone,
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
198 what LCD backlight driver circuit should I use? Should I keep the 3.5V LDO
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
199 circuit that appears to work OK in our current Luna setup, or would I be heading
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
200 into trouble with LED forward drop voltage variations? I *really* dislike the
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
201 wastefulness of the seemingly-mainstream approach (boost converter to a higher
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
202 voltage, then series resistors based on that higher voltage), but I don't know
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
203 of any better alternative. If someone with better EE knowledge can suggest a
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
204 non-wasteful approach that would eliminate or at least reduce Vled sensitivity,
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
205 it would be great, otherwise I will have to stick with my current approach and
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
206 hope for the best.
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
207
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
208 I also desire to add PWM control to this LCD backlight, so that the 45 mA
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
209 brightness will be the available maximum, rather than required at all times.
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
210 The plan I have in mind is to insert a transistor between the cathode joining
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
211 point (where either the 3 LED cathodes or the 3 resistors connected to these
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
212 cathodes join) and GND, controlled by Calypso PWL output. Unfortunately this
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
213 approach would be difficult to prototype in our current Luna environment
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
214 because Calypso LT/PWL output is not easily accessible on the Caramel board: it
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
215 does come out of the core module, but it goes to an on-board transistor for an
b1b027efce8e doc/LCD-backlight-driver article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
216 on-board indicator LED, and does not go to any header pins or test points.