FreeCalypso > hg > freecalypso-hwlab
comparison calypso-jtag/early-experiments/autoprobe.cfg @ 62:240221552ecf
calypso-jtag: files reshuffled for release
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 23 Jun 2019 03:12:30 +0000 |
parents | calypso-jtag/autoprobe.cfg@2092878ec699 |
children |
comparison
equal
deleted
inserted
replaced
61:3940292ad76f | 62:240221552ecf |
---|---|
1 # The Calypso target is connected to an unbuffered FT2232D adapter | |
2 # acting as the JTAG interface following Mother Mychaela's method, | |
3 # ADBUS7 is wired to the reset pin on TI's 14-pin connector. | |
4 # The present OpenOCD config sets things up to allow scan chain autoprobing | |
5 # and manual nSRST manipulation, and nothing more. | |
6 | |
7 interface ftdi | |
8 ftdi_vid_pid 0x0403 0x7151 | |
9 | |
10 ftdi_layout_init 0x0088 0x008b | |
11 ftdi_layout_signal nSRST -data 0x0080 -oe 0x0080 | |
12 | |
13 transport select jtag | |
14 | |
15 adapter_khz 6000 | |
16 reset_config srst_only srst_push_pull |