FreeCalypso > hg > freecalypso-hwlab
comparison calypso-jtag/autoprobe.cfg @ 56:d4357e6d6679
checking in some Calypso JTAG experiments
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sun, 12 May 2019 04:11:30 +0000 |
| parents | |
| children | 2092878ec699 |
comparison
equal
deleted
inserted
replaced
| 55:db9adb7a1529 | 56:d4357e6d6679 |
|---|---|
| 1 # The Calypso target is connected to an unbuffered FT2232D adapter | |
| 2 # acting as the JTAG interface following Mother Mychaela's method, | |
| 3 # ADBUS7 is wired to the reset pin on TI's 14-pin connector. | |
| 4 # The present OpenOCD config sets things up to allow scan chain autoprobing | |
| 5 # and manual nSRST manipulation, and nothing more. | |
| 6 | |
| 7 interface ftdi | |
| 8 ftdi_vid_pid 0x0403 0x7151 | |
| 9 | |
| 10 ftdi_layout_init 0x0088 0x00fb | |
| 11 ftdi_layout_signal nSRST -data 0x0080 -oe 0x0080 | |
| 12 | |
| 13 transport select jtag | |
| 14 | |
| 15 adapter_khz 6000 | |
| 16 reset_config srst_only srst_push_pull |