--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/calypso-jtag/early-experiments/taps-only.cfg	Sun Jun 23 03:12:30 2019 +0000
@@ -0,0 +1,40 @@
+# The Calypso target is connected to an unbuffered FT2232D adapter
+# acting as the JTAG interface following Mother Mychaela's method,
+# ADBUS7 is wired to the reset pin on TI's 14-pin connector.
+# This OpenOCD config sets up the TAPs and nSRST control ability,
+# but no ARM7 target yet.  EMU0 and EMU1 connections have also been
+# added on ADBUS5 and ADBUS6, respectively.
+
+interface ftdi
+ftdi_vid_pid 0x0403 0x7151
+
+ftdi_layout_init 0x0088 0x008b
+ftdi_layout_signal nSRST -data 0x0080 -oe 0x0080
+ftdi_layout_signal EMU0 -data 0x0020 -oe 0x0020
+ftdi_layout_signal EMU1 -data 0x0040 -oe 0x0040
+
+transport select jtag
+
+adapter_khz 6000
+reset_config srst_only srst_push_pull
+
+if { [info exists CHIPNAME] } {
+	set  _CHIPNAME $CHIPNAME
+} else {
+	set  _CHIPNAME calypso
+}
+
+if { [info exists ENDIAN] } {
+	set  _ENDIAN $ENDIAN
+} else {
+	set  _ENDIAN little
+}
+
+if { [info exists CPUTAPID] } {
+	set _CPUTAPID $CPUTAPID
+} else {
+	set _CPUTAPID 0x3100e02f
+}
+
+jtag newtap $_CHIPNAME dsp -irlen 8
+jtag newtap $_CHIPNAME arm -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID