--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/eeproms/dumps/flyswatter1	Mon Apr 22 21:36:48 2019 +0000
@@ -0,0 +1,30 @@
+# The original Flyswatter (aka Flyswatter1) by TinCanTools is an
+# FT2232D-based buffered JTAG + UART adapter.  It has a 93C56 EEPROM
+# in which a custom set of textual ID strings have been programmed,
+# but the USB ID is still 0403:6010 (FT2232x default and signifying
+# a dual UART), causing the bogosity whereby the Linux kernel creates
+# two ttyUSB devices for both FT2232D channels, for the first out of
+# that pair to subsequently disappear when OpenOCD runs and starts
+# accessing Channel A for MPSSE JTAG via libusb.
+#
+# What follows is a dump of the EEPROM made from the FS1 board I managed
+# to score on ebay; given that the serial number string is set to "FS000000",
+# I am going to assume that the factory programming was the same on all
+# units, without unique serial numbers.
+
+00: 0000 0403 6010 0500 6480 0008 0200 1896
+10: 16AE 12C4 0056 0000 0000 0000 0000 0000
+20: 0000 0000 0000 0000 0000 0000 0000 0000
+30: 0000 0000 0000 0000 0000 0000 0000 0000
+40: 0000 0000 0000 0000 0000 0000 0000 0000
+50: 0000 0000 0000 0000 0000 0000 0000 0000
+60: 0000 0000 0000 0000 0000 0000 0000 0000
+70: 0000 0000 0000 0000 0000 0000 0000 0000
+80: 0000 0000 0000 0000 0000 0000 0000 0000
+90: 0000 0000 0000 0318 0054 0069 006E 0043
+A0: 0061 006E 0054 006F 006F 006C 0073 0316
+B0: 0046 006C 0079 0073 0077 0061 0074 0074
+C0: 0065 0072 0312 0046 0053 0030 0030 0030
+D0: 0030 0030 0030 0302 0000 0000 0000 0000
+E0: 0000 0000 0000 0000 0000 0000 0000 0000
+F0: 0000 0000 0000 0000 0000 0000 0000 8317