FreeCalypso > hg > freecalypso-hwlab
view eeproms/fc-jtag @ 39:173463924e06
eeproms/ft2232-example created
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 21 Apr 2019 22:38:51 +0000 |
parents | 60b8cf977c3f |
children |
line wrap: on
line source
# This EEPROM configuration will be programmed into FreeCalypso UART+JTAG # adapters (custom hw) based on the FT2232D chip. The hardware is currently # under development; once it progresses past the vaporware phase, we are # going to submit a patch to the ftdi_sio driver in the Linux kernel to # recognize and handle this USB device similarly to several other already # existing UART+JTAG adapters of this kind, creating a ttyUSBx device # only for Channel B (UART), but not for Channel A (MPSSE JTAG). # # The distinctive custom USB ID will also help with the custom OpenOCD # configuration specific to our particular wiring of the reset and other # control signals that accompany JTAG, making our FreeCalypso UART+JTAG # adapter easier to identify among other FTDI-based USB devices. # # The present config or the USB ID contained therein MUST NOT be programmed # into generic off-the-shelf FT2232x breakout boards - please see the # jtag-unbuf config for that purpose. The present config and USB ID # may only be used by Falconia Partners LLC with our custom hardware. vid 0x0403 # FTDI pid 0x7150 # Allocated by FTDI to Falconia Partners LLC manuf Harhan product FreeCalypso UART+JTAG Adapter # Try to be nice to Weendoze lusers (or should it be Losedows?) byte00 0x00 # Channel A driver: D2XX byte01 0x08 # Channel B driver: VCP