FreeCalypso > hg > freecalypso-hwlab
view calypso-jtag/early-experiments/taps-only.cfg @ 159:a5e2b6e3bdf7
fc-uicc-tool: fix-sysmo-msisdn command ported over
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 07 Feb 2021 04:07:24 +0000 |
parents | 240221552ecf |
children |
line wrap: on
line source
# The Calypso target is connected to an unbuffered FT2232D adapter # acting as the JTAG interface following Mother Mychaela's method, # ADBUS7 is wired to the reset pin on TI's 14-pin connector. # This OpenOCD config sets up the TAPs and nSRST control ability, # but no ARM7 target yet. EMU0 and EMU1 connections have also been # added on ADBUS5 and ADBUS6, respectively. interface ftdi ftdi_vid_pid 0x0403 0x7151 ftdi_layout_init 0x0088 0x008b ftdi_layout_signal nSRST -data 0x0080 -oe 0x0080 ftdi_layout_signal EMU0 -data 0x0020 -oe 0x0020 ftdi_layout_signal EMU1 -data 0x0040 -oe 0x0040 transport select jtag adapter_khz 6000 reset_config srst_only srst_push_pull if { [info exists CHIPNAME] } { set _CHIPNAME $CHIPNAME } else { set _CHIPNAME calypso } if { [info exists ENDIAN] } { set _ENDIAN $ENDIAN } else { set _ENDIAN little } if { [info exists CPUTAPID] } { set _CPUTAPID $CPUTAPID } else { set _CPUTAPID 0x3100e02f } jtag newtap $_CHIPNAME dsp -irlen 8 jtag newtap $_CHIPNAME arm -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID