view linux-patch/orig-202007/ftdi_sio.c.patch @ 82:e2161ac7d641

linux-patch: move original 2020-07 version into orig-202007
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 06 Dec 2020 01:20:27 +0000
parents linux-patch/ftdi_sio.c.patch@749e1a14aa24
children
line wrap: on
line source

--- ftdi_sio.c.orig	2016-06-24 09:18:38.000000000 -0800
+++ ftdi_sio.c	2020-07-28 15:33:04.022945400 -0800
@@ -73,6 +73,8 @@
 				   this value */
 	int force_rtscts;	/* if non-zero, force RTS-CTS to always
 				   be enabled */
+	int no_auto_dtr_rts;	/* if non-zero, suppress automatic assertion
+				   of DTR & RTS on device open */
 
 	unsigned int latency;		/* latency setting in use */
 	unsigned short max_packet_size;
@@ -83,15 +85,19 @@
 struct ftdi_sio_quirk {
 	int (*probe)(struct usb_serial *);
 	/* Special settings for probed ports. */
-	void (*port_probe)(struct ftdi_private *);
+	void (*port_probe)(struct usb_serial_port *, struct ftdi_private *);
 };
 
 static int   ftdi_jtag_probe(struct usb_serial *serial);
 static int   ftdi_NDI_device_setup(struct usb_serial *serial);
 static int   ftdi_stmclite_probe(struct usb_serial *serial);
 static int   ftdi_8u2232c_probe(struct usb_serial *serial);
-static void  ftdi_USB_UIRT_setup(struct ftdi_private *priv);
-static void  ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
+static void  ftdi_USB_UIRT_setup(struct usb_serial_port *port,
+				 struct ftdi_private *priv);
+static void  ftdi_HE_TIRA1_setup(struct usb_serial_port *port,
+				 struct ftdi_private *priv);
+static void  ftdi_duart28c_setup(struct usb_serial_port *port,
+				 struct ftdi_private *priv);
 
 static struct ftdi_sio_quirk ftdi_jtag_quirk = {
 	.probe	= ftdi_jtag_probe,
@@ -117,6 +123,10 @@
 	.probe	= ftdi_8u2232c_probe,
 };
 
+static struct ftdi_sio_quirk ftdi_duart28c_quirk = {
+	.port_probe = ftdi_duart28c_setup,
+};
+
 /*
  * The 8U232AM has the same API as the sio except for:
  * - it can support MUCH higher baudrates; up to:
@@ -1008,6 +1018,13 @@
 	{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7560U_PID) },
 	{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7561U_PID) },
 	{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7563U_PID) },
+	/* FreeCalypso USB adapters */
+	{ USB_DEVICE(FTDI_VID, FTDI_FALCONIA_JTAG_BUF_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_FALCONIA_JTAG_UNBUF_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_FALCONIA_DUART28C_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_duart28c_quirk },
 	{ }					/* Terminating entry */
 };
 
@@ -1804,7 +1821,7 @@
 	priv->flags = ASYNC_LOW_LATENCY;
 
 	if (quirk && quirk->port_probe)
-		quirk->port_probe(priv);
+		quirk->port_probe(port, priv);
 
 	usb_set_serial_port_data(port, priv);
 
@@ -1820,7 +1837,8 @@
 /* Setup for the USB-UIRT device, which requires hardwired
  * baudrate (38400 gets mapped to 312500) */
 /* Called from usbserial:serial_probe */
-static void ftdi_USB_UIRT_setup(struct ftdi_private *priv)
+static void ftdi_USB_UIRT_setup(struct usb_serial_port *port,
+				struct ftdi_private *priv)
 {
 	priv->flags |= ASYNC_SPD_CUST;
 	priv->custom_divisor = 77;
@@ -1830,7 +1848,8 @@
 /* Setup for the HE-TIRA1 device, which requires hardwired
  * baudrate (38400 gets mapped to 100000) and RTS-CTS enabled.  */
 
-static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv)
+static void ftdi_HE_TIRA1_setup(struct usb_serial_port *port,
+				struct ftdi_private *priv)
 {
 	priv->flags |= ASYNC_SPD_CUST;
 	priv->custom_divisor = 240;
@@ -1926,6 +1945,37 @@
 	return 0;
 }
 
+/*
+ * FreeCalypso DUART28C is an FT2232D-based USB to dual UART adapter
+ * with a special quirk: Channel B RTS and DTR outputs (BDBUS2 and BDBUS4
+ * on the chip) have been repurposed to drive power and reset controls
+ * on Calypso targets.  The circuit is wired such that BDBUS[24] high
+ * (RTS/DTR inactive) is the normal state with power/reset control
+ * NOT activated, whereas BDBUS[24] low (RTS or DTR active) turn ON
+ * the corresponding power/reset control drivers.
+ *
+ * A special ftdi_sio driver quirk is needed in order to suppress
+ * automatic assertion of DTR & RTS on device open: this device's
+ * special power and reset control drivers MUST NOT be activated
+ * when the port is ordinarily opened for plain serial communication,
+ * instead they must only be activated when a special userspace
+ * application explicitly requests such activation with a TIOCMBIS ioctl.
+ *
+ * The special quirk must be applied only to FT2232D Channel B:
+ * Channel A is wired normally, with the chip's ADBUS2 and ADBUS4 outputs
+ * actually being RTS and DTR rather than something else.
+ */
+static void ftdi_duart28c_setup(struct usb_serial_port *port,
+				struct ftdi_private *priv)
+{
+	struct usb_serial *serial = port->serial;
+	struct usb_device *udev = serial->dev;
+	struct usb_interface *interface = serial->interface;
+
+	if (interface == udev->actconfig->interface[1])
+		priv->no_auto_dtr_rts = 1;
+}
+
 static int ftdi_sio_port_remove(struct usb_serial_port *port)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
@@ -1976,9 +2026,10 @@
 		}
 	}
 	/* drop RTS and DTR */
-	if (on)
-		set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
-	else
+	if (on) {
+		if (!priv->no_auto_dtr_rts)
+			set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+	} else
 		clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
 }
 
@@ -2316,7 +2367,8 @@
 			dev_err(ddev, "%s urb failed to set baudrate\n", __func__);
 		mutex_unlock(&priv->cfg_lock);
 		/* Ensure RTS and DTR are raised when baudrate changed from 0 */
-		if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
+		if (old_termios && (old_termios->c_cflag & CBAUD) == B0
+		    && !priv->no_auto_dtr_rts)
 			set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
 	}