view doc/LCD-test-wiring @ 154:ed34c8b7e2c9

fc-simtool: grcard2-set-pin[12] commands implemented
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 07 Feb 2021 02:29:07 +0000
parents 5eaf832d57d0
children
line wrap: on
line source

Our LCD test program is written assuming the following GPIO wiring:

I/O0 (ACBUS0) is wired to the register select pin
I/O1 (ACBUS1) is wired to the reset pin