view doc/LCD-test-wiring @ 78:f0b0970fbe2e

doc/DUART28-EEPROM-config article written
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 17 Sep 2020 04:18:46 +0000
parents 5eaf832d57d0
children
line wrap: on
line source

Our LCD test program is written assuming the following GPIO wiring:

I/O0 (ACBUS0) is wired to the register select pin
I/O1 (ACBUS1) is wired to the reset pin