# The original Flyswatter (aka Flyswatter1) by TinCanTools is an
# FT2232D-based buffered JTAG + UART adapter.  It has a 93C56 EEPROM
# in which a custom set of textual ID strings have been programmed,
# but the USB ID is still 0403:6010 (FT2232x default and signifying
# a dual UART), causing the bogosity whereby the Linux kernel creates
# two ttyUSB devices for both FT2232D channels, for the first out of
# that pair to subsequently disappear when OpenOCD runs and starts
# accessing Channel A for MPSSE JTAG via libusb.
#
# What follows is a dump of the EEPROM made from the FS1 board I managed
# to score on ebay; given that the serial number string is set to "FS000000",
# I am going to assume that the factory programming was the same on all
# units, without unique serial numbers.

00: 0000 0403 6010 0500 6480 0008 0200 1896
10: 16AE 12C4 0056 0000 0000 0000 0000 0000
20: 0000 0000 0000 0000 0000 0000 0000 0000
30: 0000 0000 0000 0000 0000 0000 0000 0000
40: 0000 0000 0000 0000 0000 0000 0000 0000
50: 0000 0000 0000 0000 0000 0000 0000 0000
60: 0000 0000 0000 0000 0000 0000 0000 0000
70: 0000 0000 0000 0000 0000 0000 0000 0000
80: 0000 0000 0000 0000 0000 0000 0000 0000
90: 0000 0000 0000 0318 0054 0069 006E 0043
A0: 0061 006E 0054 006F 006F 006C 0073 0316
B0: 0046 006C 0079 0073 0077 0061 0074 0074
C0: 0065 0072 0312 0046 0053 0030 0030 0030
D0: 0030 0030 0030 0302 0000 0000 0000 0000
E0: 0000 0000 0000 0000 0000 0000 0000 0000
F0: 0000 0000 0000 0000 0000 0000 0000 8317