# HG changeset patch # User Mychaela Falconia # Date 1694409716 0 # Node ID 88b8257d353ba801c3ab7eff6284cbe28a9589d0 # Parent f9ca05460238d11136dbef569d5c5d6bedd53b95 eeproms: rm all configs that went to fc-usbser-tools These configs need to be actively maintained, hence having more than one official home location for them is a bad idea. diff -r f9ca05460238 -r 88b8257d353b eeproms/duart28c --- a/eeproms/duart28c Mon Sep 11 05:13:54 2023 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,16 +0,0 @@ -# This EEPROM configuration is one of two possible configs that can be -# programmed into FreeCalypso DUART28 adapters (custom hw made by -# Falconia Partners LLC) based on the FT2232D chip. The present DUART28C -# configuration sets a custom USB ID and is intended to be used together -# with a custom patch to the Linux kernel ftdi_sio driver that applies -# a special quirk when this USB ID is detected. The driver quirk in -# question applies only to FT2232D Channel B and suppresses automatic -# assertion of DTR & RTS when the corresponding ttyUSBx device is opened; -# this driver quirk is required in order to use the DUART28C adapter's -# boot control outputs. - -vid 0x0403 # FTDI -pid 0x7152 # Allocated by FTDI to Falconia Partners LLC - -manuf FreeCalypso -product DUART28C diff -r f9ca05460238 -r 88b8257d353b eeproms/duart28s --- a/eeproms/duart28s Mon Sep 11 05:13:54 2023 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,18 +0,0 @@ -# This EEPROM configuration is one of two possible configs that can be -# programmed into FreeCalypso DUART28 adapters (custom hw made by -# Falconia Partners LLC) based on the FT2232D chip. The present DUART28S -# configuration sets the default USB ID that is used by FT2232x adapters -# and is recognized and treated as a generic dual UART device by the -# standard unpatched Linux kernel ftdi_sio driver. This configuration -# is intended for those users who don't need DUART28C boot control outputs -# and who wish to avoid the major inconvenience of applying a custom patch -# to their Linux kernel ftdi_sio driver. Please note that boot control -# outputs CTL1 and CTL2 cannot be used with this EEPROM configuration - -# they will be triggered whenever Channel B ttyUSBx device is opened, -# making them unusable. - -vid 0x0403 # FTDI -pid 0x6010 # FT2232x default, treated as standard dual UART by Linux - -manuf FreeCalypso -product DUART28S diff -r f9ca05460238 -r 88b8257d353b eeproms/ft2232-example --- a/eeproms/ft2232-example Mon Sep 11 05:13:54 2023 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,4 +0,0 @@ -vid 0x0403 # FTDI -pid 0x6010 # FT2232x default -manuf Example manuf -product Example product diff -r f9ca05460238 -r 88b8257d353b eeproms/ft232r-example --- a/eeproms/ft232r-example Mon Sep 11 05:13:54 2023 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,4 +0,0 @@ -vid 0x0403 # FTDI -pid 0x6001 # FT232R default -manuf Example manuf -product Example product diff -r f9ca05460238 -r 88b8257d353b eeproms/icestick --- a/eeproms/icestick Mon Sep 11 05:13:54 2023 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,26 +0,0 @@ -# Lattice iCEstick FPGA board features an FT2232H chip, with Channel A wired -# for MPSSE mode (access to SPI flash and FPGA configuration controls) and -# Channel B wired as a UART for user logic implemented in the FPGA. This -# FT2232H subsystem includes a 93C56 EEPROM, but boards are shipped with it -# blank, causing the FT2232H chip to take its default VID:PID. -# -# Having this default VID:PID causes undesirable behavior under Linux: a pair -# of ttyUSB devices is created upon plug-in, but the first of these two then -# disappears when the developer runs iceprog to manipulate FPGA programming, -# creating a gap in ttyUSB device numbers. And even if you are working with a -# stable logic design and not running iceprog, the first of the two created -# ttyUSB devices is still bogus, as that hardware channel is wired for MPSSE -# and not UART. -# -# In Falconian queendom, the solution to this problem is to program the EEPROM -# behind the FT2232H chip with our own image and set the USB ID to a code that -# tells the Linux kernel to create a ttyUSB device only for Channel B - the -# so-called "JTAG quirk". Falconia Partners LLC got a block of 8 PIDs -# officially allocated to us by FTDI, and since 2020-09 the mainline Linux -# kernel recognizes two of them as JTAG quirks. Use one of those two PIDs. - -vid 0x0403 # FTDI -pid 0x7150 # Allocated by FTDI to Falconia, JTAG quirk in Linux - -manuf Lattice -product ICE40HX1K-STICK-EVN diff -r f9ca05460238 -r 88b8257d353b eeproms/jtag-unbuf --- a/eeproms/jtag-unbuf Mon Sep 11 05:13:54 2023 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,30 +0,0 @@ -# This EEPROM configuration is meant to be programmed into COTS FT2232D -# breakout boards used as unbuffered JTAG adapters. The custom USB VID:PID -# belongs to Falconia Partners LLC; we hereby allow the community to program -# this PID into generic FT2232D boards (not made by Falconia) as long as -# it is used for the present purpose with this full EEPROM configuration. -# -# The purpose of having a custom USB ID is to prevent the Linux kernel -# ftdi_sio driver from treating this FT2232D instance as a dual UART and -# creating a ttyUSB device for Channel A. If you wish to use Channel B -# as a UART (which is still available for that purpose), you will need to use -# a Linux kernel version with commit 6cf87e5edd9944e1d3b6efd966ea401effc304ee -# included, or apply that commit locally if your kernel version does not -# include it. - -vid 0x0403 # FTDI -pid 0x7151 # Allocated by FTDI to Falconia Partners LLC -manuf FTDI -product Unbuffered JTAG adapter - -# We program Channel A to come up in the 245 FIFO mode prior to being -# switched into MPSSE mode by OpenOCD, as opposed to the default 232 UART mode. -# If the FT2232D chip's ADBUS pins are connected directly to the JTAG target -# without a buffer (what we mean by an unbuffered JTAG adapter), the default -# 232 UART mode is NOT safe, as it will produce a fight on the ADBUS2 line -# between the UART RTS output and the target's TDO output. 245 FIFO mode is -# expected to be safer, as all 8 ADBUS lines will be inputs for as long as -# the ACBUS2 line is left unconnected and not driven by anything. - -byte00 0x01 # Channel A: FIFO mode, D2XX driver -byte01 0x08 # Channel B: UART mode, VCP driver diff -r f9ca05460238 -r 88b8257d353b eeproms/mcu-host-bus --- a/eeproms/mcu-host-bus Mon Sep 11 05:13:54 2023 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,18 +0,0 @@ -# We are going to use COTS FT2232D breakout boards in the MCU host bus -# emulation mode (enabled at run time via libftdi, cannot be configured -# in the EEPROM) to drive several different candidate 176x220 pix TFT LCDs -# (8-bit parallel 8080-style interface) as part of our LCD evaluation -# testing and vendor selection process. The purpose of this EEPROM config -# with a custom FTDI PID is to keep the Linux kernel's ftdi_sio driver -# from binding to this FT2232D instance, avoiding the creation of ttyUSBx -# device nodes for it. - -vid 0x0403 # FTDI -pid 0x7157 # Allocated by FTDI to Falconia Partners LLC -manuf FTDI -product MCU host bus emulation - -# Try to be nice to Weendoze lusers (or should it be Losedows?) - -byte00 0x00 # Channel A driver: D2XX -byte01 0x00 # Channel B driver: D2XX