FreeCalypso > hg > freecalypso-reveng
comparison compal/boot/code-deriv @ 401:4b6b595ae0a0
compal/boot/code-deriv: new analysis
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 14 Jan 2023 23:59:23 +0000 |
parents | |
children |
comparison
equal
deleted
inserted
replaced
400:5377f91aea97 | 401:4b6b595ae0a0 |
---|---|
1 It is apparent that Compal's bootloader was genealogically derived from TI's | |
2 original FRBL (flash-resident bootloader) built into TCS211 reference fw. The | |
3 most "basic" or "pristine" version of Compal's bootloader is the one analyzed | |
4 in c123-boot.disasm, aided by symbolic information from R87.2.1.03.map; here we | |
5 shall analyze the diffs between this code and the original TCS211 version in | |
6 the ../../leo-obj/bootloader directory. | |
7 | |
8 0x830: serial.obj .const section | |
9 | |
10 Exact match to TCS211-20070608! | |
11 | |
12 0x86c: bootloader.obj .text section | |
13 | |
14 The only diffs from TCS211 are: | |
15 | |
16 1) The addition of these instructions (right at _INT_Bootloader_Start) to set | |
17 VCLKOUT_DIV2 bit in the FFFF:FD02 register: | |
18 | |
19 89c: e51f1020 ldr r1, =0xfffffd00 ; via 0x884 | |
20 8a0: e1d120b2 ldrh r2, [r1, #2] | |
21 8a4: e51f002c ldr r0, =0x40 ; via 0x880 | |
22 8a8: e1800002 orr r0, r0, r2 | |
23 8ac: e1c100b2 strh r0, [r1, #2] | |
24 | |
25 2) The addition of 32-bit word 0x40 to the literal at the beginning of this | |
26 .text section, before _INT_Bootloader_Start entry point. | |
27 | |
28 0x968: start.obj .text section | |
29 | |
30 Static function 0 (0x0 in reference object, 0x968 in Compal's bl) matches | |
31 exactly. | |
32 | |
33 Static function 1 (0x2c in reference object, 0x994 in Compal's bl) matches | |
34 exactly. | |
35 | |
36 Static function 2 (0xe0 in reference object, 0xa48 in Compal's bl) matches | |
37 exactly. | |
38 | |
39 Final function sta_select_application(): | |
40 | |
41 * The beginning of the function is the same between TI and Compal versions: | |
42 | |
43 - call to static function 0 (hw init) | |
44 - call to ser_initialize_serial_link() | |
45 - call to con_initialize_conversion() | |
46 | |
47 * The remainder of the function differs fundamentally: | |
48 | |
49 - TI's version calls cmd_check_application_in_flash(), followed by static | |
50 functions 1 and 2 that implement FRBL1 interrupt-boot window provision. | |
51 | |
52 - Compal's version calls their heavily modified version of fluid_bootloader(), | |
53 which is where Compal's serial boot entry protocol is implemented, followed | |
54 by FTM_Tool_check() where the "ftmtool - (yes) - (modem)error" business | |
55 happens. | |
56 | |
57 0xb10: boot.obj .text section | |
58 | |
59 The dead code preamble before fluid_bootloader() function (5 32-bit ARM | |
60 instructions) is the same between TI and Compal versions. | |
61 | |
62 The body of fluid_bootloader() is completely different, leaving only the now- | |
63 misleading function name: all FRBL2 code has been ripped out, replaced with | |
64 Compal's serial boot entry protocol. | |
65 | |
66 The following functions from TI's original boot.c survive in Compal's version: | |
67 | |
68 jump() | |
69 putchar() | |
70 getchar() | |
71 hardware_init() -- already a mostly-do-nothing in TCS211 | |
72 uart_init() | |
73 | |
74 The following functions in this module are entirely new in Compal's version: | |
75 | |
76 SeekMsg() | |
77 FTM_Tool_check() | |
78 getchar_timeout() | |
79 UartTimeout() -- unused! | |
80 CheckFTMtoolMode() | |
81 putchar__() -- unused! | |
82 getchar__() -- unused! | |
83 | |
84 0xfb4: branch_in_RAM.obj .text section | |
85 | |
86 Exact match to TCS211-20070608, but then it's a trivial assembly module. | |
87 | |
88 0xfb8: command.obj .text section | |
89 | |
90 Exact match to TCS211-20070608! | |
91 | |
92 0x13d0: convert.obj .text section | |
93 | |
94 Exact match to TCS211-20070608, including the call to fluid_bootloader() in | |
95 con_get_command_from_string() which is now a complete bogon. | |
96 | |
97 0x1594: optboot.obj .text section | |
98 | |
99 Exact match to TCS211-20070608, except for one byte change in the ID returned | |
100 by opt_get_monitor_id(). | |
101 | |
102 0x165c: serial.obj .text section | |
103 | |
104 Exact match to TCS211-20070608! | |
105 | |
106 0x1cec: cmdboot.obj .text section | |
107 | |
108 Exact match to TCS211-20070608! | |
109 | |
110 0x1dd8: start.obj .text:v$3 section | |
111 | |
112 Exact match to TCS211-20070608! |