view pirelli/serial @ 361:5d1c186cc3cf

fluid-mnf/target-bin/cmd39.m0: hand-crafted by copying cmd.m0 and manually patching the S3 record that contains the 16-bit word at 0x1140, the literal pool DPLL init constant used by hardware_init_calypso()
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 14 Mar 2020 19:33:52 +0000
parents fdfb57a1c5fe
children
line wrap: on
line source

Tracing the apparently-unused MODEM UART signals

TxD from Calypso: ball B9, L1 trace goes to (3905,1100).  Found it on L2, goes
to an inner via at (3914,1070).  Found the inner via on L7, goes to (3182,1071).
On L8 the signal goes directly to the debug connector identified by steve-m.

RxD to Calypso: ball A9, seems to have a micro-via under the ball, pad coords
(3888,1054).  Found it on L2, goes to an inner via at (3911,1030) and also to
what looks like a via back to L1 at (3858,1228).  The stub back to L1 appears
to be a pull-up resistor.  Found the inner via on L7, goes to (3154,928).
On L8 the signal goes directly to the debug connector identified by steve-m.