FreeCalypso > hg > freecalypso-reveng
view pirelli/pcb @ 296:abcec72cade4
blobstat: maghybrid-libclass added
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 21 Sep 2019 21:56:53 +0000 |
parents | 8e4dac492552 |
children |
line wrap: on
line source
The Pirelli DP-L10 PCB appears to have 8 layers. Following the good old DEC convention, I shall refer to them as L1 through L8. Not knowing the original designers' intended identification, I have arbitrarily assigned L1 to be the battery/SIM side and L8 to be the display/keypad side. This numbering direction makes it easier to work with steve-m's grind-down pictures. Via structure: there don't seem to be too many all-the-way-through vias, if any at all, other than maybe the grounding ones around the edges of the board. Instead most/all internal vias are blind, spanning from L2 through L7. At both surfaces there are micro-vias (with many/most of them one can't even see the hole in steve-m's pictures, only a copper circle which one has to infer is an "annulus" for a micro-via), and these micro-vias only go one layer deep: from L1 to L2, and from L8 to L7.