--- a/fluid-mnf/Performance	Sun Mar 15 08:59:12 2020 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,19 +0,0 @@
-Even though it cannot be a replacement for fc-loadtool in most use cases, FLUID
-is very aggressively optimized for speed in ways that would be hard to match in
-our fc-loadtool architecture.  Therefore, on those targets which are supported
-by both FLUID and fc-loadtool, flash programming with FLUID is faster.  Here
-are the performance numbers, flashing an Openmoko GTA02 modem with firmware
-version moko-new-fw-20190128, going through the external headset jack,
-UberWaves CP2102 Professional cable:
-
-fluid-mnf   at 115200 baud: 2m28s
-fc-loadtool at 115200 baud: 4m02s
-fluid-mnf   at 812500 baud: 0m40s
-fc-loadtool at 812500 baud: 1m12s
-
-With both tools the m0 version of the firmware image (fwimage.m0) was being
-flashed; in the case of fc-loadtool the new flash e-program-m0 command was used.
-The version of fc-loadtool used for this test is the one that is about to be
-released with fc-host-tools-r13; previous versions would be even slower.  In
-the case of fluid-mnf the -C option was used to disable delta downloads, making
-the test operation independent of previous flash state.