| Wed, 04 Mar 2020 23:17:27 +0000 |
Mychaela Falconia |
frbl/reconst/boot.c: import from TI's FLUID package
|
| Wed, 04 Mar 2020 23:12:22 +0000 |
Mychaela Falconia |
frbl/reconst/main/sys_types.h: import from TCS211
|
| Wed, 04 Mar 2020 23:10:48 +0000 |
Mychaela Falconia |
frbl/reconst/inc/command.h: tab fixes
|
| Wed, 04 Mar 2020 23:06:07 +0000 |
Mychaela Falconia |
frbl/reconst/inc: import from TCS211 surviving source
|
| Sat, 29 Feb 2020 05:36:07 +0000 |
Mychaela Falconia |
fluid-mnf: original source from TI,
|
| Fri, 31 Jan 2020 22:45:18 +0000 |
Mychaela Falconia |
moko1-fw-disasm: simple analysis of init module
|
| Mon, 28 Oct 2019 06:09:28 +0000 |
Mychaela Falconia |
dspanal: char2coff works now
|
| Mon, 28 Oct 2019 05:20:50 +0000 |
Mychaela Falconia |
dspanal: char2coff utility written, compiles
|
| Mon, 28 Oct 2019 02:37:47 +0000 |
Mychaela Falconia |
dspanal: char2bin utility written, compiles
|
| Sun, 06 Oct 2019 02:27:52 +0000 |
Mychaela Falconia |
dsample-fw-disasm: one more cinit record
|
| Sun, 06 Oct 2019 01:56:38 +0000 |
Mychaela Falconia |
dsample-fw-disasm: tpudrv10 init code analysed
|
| Sun, 06 Oct 2019 01:29:35 +0000 |
Mychaela Falconia |
dsample-fw-disasm: Tx up/down functions located and analysed
|
| Sun, 06 Oct 2019 00:36:11 +0000 |
Mychaela Falconia |
dsample-fw-disasm: Rx up/down functions located and analysed
|
| Sat, 05 Oct 2019 23:47:32 +0000 |
Mychaela Falconia |
dsample-fw-disasm: rf_program() and l1dmacro_agc() analysed
|
| Sat, 05 Oct 2019 19:21:06 +0000 |
Mychaela Falconia |
dsample-fw-disasm: finished l1_drive and its l1dmacro calls
|
| Sat, 05 Oct 2019 08:29:39 +0000 |
Mychaela Falconia |
dsample-fw-disasm: a few tpudrv10 l1dmacro functions
|
| Sat, 05 Oct 2019 07:56:47 +0000 |
Mychaela Falconia |
dsample-fw-disasm: found l1_drive and tpudrv modules
|
| Sat, 21 Sep 2019 22:43:18 +0000 |
Mychaela Falconia |
blobstat/specs: added divisions spec
|
| Sat, 21 Sep 2019 22:04:45 +0000 |
Mychaela Falconia |
blobstat: classification spec files moved into specs subdir
|
| Sat, 21 Sep 2019 21:56:53 +0000 |
Mychaela Falconia |
blobstat: maghybrid-libclass added
|
| Sat, 21 Sep 2019 21:25:09 +0000 |
Mychaela Falconia |
blobstat: actually works now
|
| Sat, 21 Sep 2019 21:17:29 +0000 |
Mychaela Falconia |
blobstat: code finished, compiles
|
| Sat, 21 Sep 2019 21:07:45 +0000 |
Mychaela Falconia |
blobstat: mostly complete
|
| Sun, 09 Jun 2019 22:56:27 +0000 |
Mychaela Falconia |
gtm900/fw-reg-config: note that the main config regs are as expected
|
| Sun, 09 Jun 2019 21:05:12 +0000 |
Mychaela Falconia |
gtm900/fw-reg-config note added
|
| Fri, 07 Jun 2019 20:20:49 +0000 |
Mychaela Falconia |
gtm900/interface-signals: notes from connection tracing
|
| Fri, 07 Jun 2019 18:44:00 +0000 |
Mychaela Falconia |
gtm900 subdir created, fw-disasm work moved inside
|
| Fri, 31 May 2019 01:42:34 +0000 |
Mychaela Falconia |
gtm900-fw-disasm created
|
| Sat, 23 Mar 2019 05:11:09 +0000 |
Mychaela Falconia |
compal/c156-fw-disasm: got to Init_Target()
|
| Thu, 14 Mar 2019 22:40:18 +0000 |
Mychaela Falconia |
compal/j100-fw-disasm: GPIO init analysis
|
| Thu, 14 Mar 2019 09:06:43 +0000 |
Mychaela Falconia |
compal/c156-fw-disasm: first attempt
|
| Thu, 14 Mar 2019 08:33:39 +0000 |
Mychaela Falconia |
compal/c139-fw-disasm: GPIO init analysis complete
|
| Thu, 14 Mar 2019 07:12:27 +0000 |
Mychaela Falconia |
compal/sym-fw-disasm: ULPD setup diffs analysed
|
| Thu, 14 Mar 2019 06:55:02 +0000 |
Mychaela Falconia |
compal/sym-fw-disasm: initial analysis
|
| Sun, 03 Mar 2019 07:53:54 +0000 |
Mychaela Falconia |
dsample-fw-disasm: found l1dmacro_init_hw() and
|
| Sun, 17 Feb 2019 00:42:34 +0000 |
Mychaela Falconia |
compal/c139-{rssi,txcal}: results of C139 to CMU200 experiment
|
| Sat, 16 Feb 2019 18:30:11 +0000 |
Mychaela Falconia |
pirelli/{rssi,txcal}: results of the Pirelli to CMU200 experiment
|
| Wed, 12 Dec 2018 07:48:48 +0000 |
Mychaela Falconia |
benq-fw-disasm: dug a little into BenQ's M32 firmware
|
| Mon, 05 Nov 2018 23:18:42 +0000 |
Mychaela Falconia |
compal/c156-boot.disasm: GPIO comments were wrong
|
| Fri, 21 Sep 2018 23:08:32 +0000 |
Mychaela Falconia |
leo-obj/bootloader/Notes: bootloader blob reverse-engineered
|
| Sat, 24 Mar 2018 20:38:24 +0000 |
Mychaela Falconia |
Pirelli PCB RE: traced out Calypso FDP and flash reset input
|
| Sat, 20 Jan 2018 21:00:13 +0000 |
Mychaela Falconia |
fbdump2ppm: adjust for R2D's extra 32-bit word
|
| Sat, 20 Jan 2018 20:46:08 +0000 |
Mychaela Falconia |
miscprog: fbdump2ppm program written, compiles
|
| Sat, 20 Jan 2018 00:38:51 +0000 |
Mychaela Falconia |
dsample-fw-disasm: done with the calc_a_b()-like function
|
| Fri, 19 Jan 2018 23:30:22 +0000 |
Mychaela Falconia |
dsample-fw-disasm: magic2 tables located
|
| Fri, 19 Jan 2018 08:03:10 +0000 |
Mychaela Falconia |
dsample-fw-disasm: cinit for magic1 tables
|
| Fri, 19 Jan 2018 07:20:42 +0000 |
Mychaela Falconia |
dsample-fw-disasm: located cinit records for rf_path and synth_*
|
| Fri, 19 Jan 2018 06:19:59 +0000 |
Mychaela Falconia |
cinitdump program written, compiles
|
| Fri, 19 Jan 2018 05:15:50 +0000 |
Mychaela Falconia |
dsample-fw-disasm tpudrv10 code analysis: got to calc_a_b()
|
| Thu, 18 Jan 2018 17:12:17 +0000 |
Mychaela Falconia |
dsample-fw-disasm: found apparent beginning of the tpudrv10 module
|
| Thu, 18 Jan 2018 08:03:03 +0000 |
Mychaela Falconia |
dsample-fw-disasm: beginning to locate tpudrv10 code
|
| Thu, 18 Jan 2018 05:39:53 +0000 |
Mychaela Falconia |
dsample-fw-disasm: ARMIO functions located
|
| Thu, 18 Jan 2018 05:10:18 +0000 |
Mychaela Falconia |
dsample-fw-disasm: comment fixes
|
| Tue, 26 Dec 2017 12:26:23 +0000 |
Mychaela Falconia |
pirelli/fw-disasm: CV charging analyzed
|
| Tue, 26 Dec 2017 07:13:21 +0000 |
Mychaela Falconia |
pirelli/fw-disasm: pwr_start_CV_charging() analyzed
|
| Tue, 26 Dec 2017 06:49:53 +0000 |
Mychaela Falconia |
pirelli/fw-disasm: CI charging analyzed
|
