FreeCalypso > hg > freecalypso-schem2

annotate venus/doc/USB-and-mobile-domains @ 98:3ab69117b09f default tip

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
minnie/doc/Design-spec: finished in the first pass
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 01 Oct 2023 08:17:05 +0000
parents beb6519a3be5
children
Ignore whitespace changes - Everywhere: Within whitespace: At end of lines:
rev   line source
38
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
1 1. Introduction
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
2
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
3 FC Venus board will consist of two principal circuit domains: the mobile domain
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
4 corresponding to a battery-powered mobile phone and a USB computer interface
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
5 block which becomes the USB domain. The USB domain will be based around FT2232D
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
6 USB to dual UART chip, it will be strictly bus-powered (never taking any power
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
7 from the battery), and its sole purpose is to provide a host computer interface
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
8 to the mobile, i.e., make the two Calypso UARTs accessible via USB. The USB
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
9 domain will get powered only when a host computer (or a USB charger) is
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
10 connected, and will be totally unpowered at all other times, i.e., when the
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
11 board is untethered and runs on battery power like a true mobile phone.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
12
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
13 At the top level of circuit hierarchy (see src/top/board.v), our board consists
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
14 of the two principal domains (mobile and USB) interconnected with just a few
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
15 wires: common ground, the set of UART signals going between the two domains, a
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
16 charging power supply rail (user-switched, so charging won't always happen when
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
17 a USB host is connected) and a couple of boot control signals.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
18
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
19 2. UART signals between domains
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
20
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
21 The connection of UART interface signals between USB and mobile domains is
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
22 arguably the most challenging and the most complicated part of our entire
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
23 built-in USB-serial arrangement. The challenges and the circuit complexity
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
24 which we came up with in response to these challenges stem from the need to
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
25 avoid bad things happening in partial power-down scenarios. Most of the
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
26 background information is provided in section 1.12.2 of our FreeCalypso Handset
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
27 Specification (FC-handset-spec in freecalypso-docs), and this document provides
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
28 further details that were elucidated only in the process of capturing the actual
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
29 circuit design for FC Venus.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
30
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
31 2.1. Set of signals
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
32
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
33 The set of UART interface signals implemented on FC Venus will be the same as
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
34 listed in FC Handset Specification section 1.12.1. We have a total of 5 signals
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
35 running from Calypso outputs to FT2232D, and a total of 4 signals running from
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
36 FT2232D to Calypso inputs.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
37
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
38 2.2. Buffer ICs
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
39
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
40 Two Nexperia LVC family buffer ICs will be used on FC Venus for the purpose of
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
41 ferrying our set of UART interface signals between the two domains. These two
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
42 ICs are U401 (74LVC125A) in the mobile domain and U705 (74LVC541A) in the USB
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
43 domain.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
44
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
45 U401 is powered from the mobile domain's Vio rail, and it serves only the 4
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
46 signals running from FT2232D to Calypso inputs, neatly using all 4 slots of
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
47 74LVC125A. This LVC buffer serves as a barrier, preventing feeding of power
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
48 from USB domain outputs into the Calypso+Iota chipset's Vio rail in the PPD
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
49 scenario where a USB host is connected, but the charging switch is off or the
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
50 battery is critically low and undergoing precharge, with the chipset switched
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
51 off.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
52
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
53 No corresponding mobile domain buffers will be used for Calypso outputs: these
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
54 5 signals will be connected directly between Calypso pads and the interdomain
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
55 interface, where they will go to U705.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
56
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
57 On the USB side, U705 will be powered from a USB domain 3.3V rail, i.e., the
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
58 output of a 3.3V regulator powered from USB. (This USB domain supply will be
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
59 the only part of FC Venus board using 3.3V - there are no regulated voltages
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
60 higher than 2.8V in the mobile domain.) The 8 slots of this 74LVC541A buffer
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
61 are split between 5 serving the Calypso to FT2232D signal direction and the
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
62 other 3 serving FT2232D to Calypso signals.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
63
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
64 The purpose of the 5 U705 buffer slots serving the Calypso to FT2232D signal
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
65 direction is to stop the flow of current out of Calypso UART and GPIO outputs
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
66 in the "normal mobile usage" PPD scenario when there is no USB host connected.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
67 With this buffer present, Calypso UART outputs will "see" a high impedance and
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
68 won't source any battery-drawn current (beyond leakage of about 0.1 uA typical
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
69 per pin, according to Nexperia datasheet), no matter whether the USB domain is
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
70 powered or not. OTOH, if this buffer were omitted and Calypso outputs were
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
71 connected directly to FT2232D inputs, the latter inputs would appear as shorts
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
72 to ground when USB power is absent, putting an unacceptable load on Calypso
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
73 outputs.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
74
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
75 The other 3 slots of U705 serve FT2232D-to-Calypso signals TxD, DTR and TxD2.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
76 On these 3 signals there are pull-up resistors to VBAT in front of U401 inputs
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
77 (see section 2.4), and the U705 buffer's Ioff feature will allow those pull-up
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
78 resistors to work as intended. If these pulled-up-to-VBAT nets going to U401
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
79 inputs were sourced directly from FT2232D outputs without going through U705,
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
80 the powered-off FT2232D chip's I/O pins would present a lower resistance to GND
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
81 than the pull-up to VBAT, drawing excessive current from the battery and making
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
82 the pull-up ineffective.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
83
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
84 There is just one FT2232D-to-Calypso UART interface signal that does not go
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
85 through U705, and it is RTS. It has a pull-down resistor to GND instead of a
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
86 pull-up to VBAT in front of its U401 input. With only 8 signals rather than
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
87 all 9 needing to go through a USB domain LVC buffer, the 8 slots of a single
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
88 74LVC541A IC become sufficient.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
89
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
90 2.3. UART signals from Calypso to FT2232D
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
91
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
92 In the case of these 5 signals running from Calypso outputs to U705 inputs, one
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
93 very noteworthy detail is that there are _no_ pull-up or pull-down resistors on
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
94 these nets. When the Calypso+Iota chipset is switched on, all 5 Calypso outputs
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
95 will be actively driving and there are no problem issues. However, in the PPD
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
96 scenario where a USB host is connected, but the Calypso+Iota chipset is switched
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
97 off (the charging switch is off or the battery is precharging), the absence of
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
98 pull resistors suggests that U705 inputs will be floating, which certainly looks
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
99 bad at first glance.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
100
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
101 However, a more detailed analysis shows that floating CMOS inputs aren't bad
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
102 "in principle", but instead they are bad when they can float around the input
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
103 switching threshold, causing potential oscillations and high current draw from
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
104 the buffer's Vcc supply. And in the present case, the Mother's analysis
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
105 suggests that the signals in question won't float around the switching threshold
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
106 - instead we expect them to be sensed as a consistent logic low in the PPD
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
107 scenario in which they appear to float.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
108
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
109 In this PPD scenario, the Iota chip's VRIO regulator is off, thus the Vio rail
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
110 will be at 0 V unless something feeds wayward power into it. Calypso chip
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
111 outputs connected to the signal nets under consideration have clamping diodes
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
112 to this Vio rail. Therefore, if a stray voltage somehow accumulates on those
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
113 nets that is high enough to approach the LVC buffer's input switching threshold,
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
114 it will also be high enough to drain to Vio through Calypso I/O pad clamping
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
115 diodes, and ultimately to GND.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
116
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
117 What is our reason for not adding pull-up or pull-down resistors to these nets?
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
118 Besides the obvious reason of not wanting to throw even more PCB real estate at
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
119 this already way overcomplicated USB-serial interface arrangement, each of the
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
120 two options (pull-up or pull-down) would introduce its own problems.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
121
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
122 The pull-up resistor option has already proven to be problematic on the
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
123 DUART28+Caramel2 combo, particularly in the Luna configuration in which both PPD
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
124 scenarios become real. When the Calypso+Iota chipset is on but there is no USB
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
125 power present, current from Calypso outputs flows backwards through these
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
126 pull-up resistors and feeds into the USB domain's power rail to which these
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
127 resistors are connected. The USB domain output buffer then powers up
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
128 erratically, feeding garbage to Calypso inputs and preventing Calypso from
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
129 entering sleep modes. And in the opposite PPD scenario (USB power present,
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
130 chipset switched off), enough power can flow through these resistors into
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
131 Calypso I/O pad clamping diodes to feed into Vio and cause erratic LED
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
132 behaviour! And on FC Venus we would have the additional problem of not having
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
133 a USB-powered 2.8V regulator, as we don't need it for anything else.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
134
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
135 Pull-down resistors to GND would be much less problematic. However, if we use
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
136 a resistor value that is low enough to be better than floating, such as the
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
137 "canonical" 100 kOhm, we would be introducing a *continuous* drain on the
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
138 battery in normal operation. Calypso outputs corresponding to host RxD, RxD2,
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
139 DCD and RI will normally be high, thus each of those would be a 28 uA drain.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
140 All 4 combine into a 112 uA continuous drain for no good justification, always
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
141 present whether or not there is a USB host connected, unlike the other similar
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
142 drain discussed in section 2.4. Therefore, the Mother's decision is to do away
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
143 with pull resistors in either direction, and hope that my reasoning is correct
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
144 in that we won't get prolonged floating voltages around the input switching
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
145 threshold.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
146
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
147 Because these seemingly-floating nets are expected to be sensed as logic low,
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
148 the same logic low will be propagated to FT2232D inputs, which means a break
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
149 condition on RxD and asserted state on all control signals. For this reason
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
150 the Mother's earlier software recommendation still holds: when operating in this
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
151 scenario, only operate on the second UART channel (the data leads only one that
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
152 also has boot controls), and don't open the AT command UART channel except when
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
153 the mobile is switched on and regular operational firmware runs normally.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
154
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
155 2.4. Pull-up resistors to VBAT
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
156
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
157 Experience with Caramel2 boards shows that Calypso UARTs don't like seeing a
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
158 break condition presented to them for extended lengths of time, thus we need to
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
159 design our FC Venus USB-serial interface in such a way that when there is no USB
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
160 host present, Calypso inputs RX_MODEM and RX_IRDA will receive high levels
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
161 (meaning RS-232 idle) rather than low (meaning RS-232 break). Having an
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
162 extended break condition presented to UARTs prevents entry into Calypso sleep
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
163 modes, which is obviously bad. The practical implication is that U401 inputs
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
164 which this buffer propagates to Calypso RX_MODEM and RX_IRDA need to be have
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
165 some kind of mobile domain pull-ups on them, as opposed to floating or pulled
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
166 down. Less critically, we do the same for the DTR signal running from the USB
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
167 domain to the mobile domain - thus DTR will be seen as negated when there is no
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
168 USB host connected.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
169
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
170 However, if we were to implement pull-ups to the Calypso+Iota chipset's Vio rail
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
171 on these nets, we would have a problem in the PPD scenario of USB power present,
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
172 chipset switched off: U705 high outputs would feed power into Vio through these
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
173 resistors, potentially causing Calypso peripherals to turn on erratically as
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
174 has been observed on Caramel2 boards. Therefore, we are making a more unusual
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
175 innovation: instead of pull-ups to Vio, we are implementing pull-ups to VBAT,
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
176 i.e., to the unregulated raw positive battery terminal. The resistor value
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
177 chosen by the Mother is 22 kOhm, and the rest of this section explores the
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
178 implications of this unusual design under all expected conditions.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
179
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
180 First let us examine what happens in the case of "normal" mobile usage: the
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
181 device is untethered and mobile, powered by the battery, and there is no USB
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
182 host or charger connected. In this case the input voltage seen by U401 will be
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
183 raw VBAT, which will always be higher than its 2.8V supply (but still safely
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
184 below the 5.5 V limit), thus the LVC buffer will sense a good logic high as
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
185 desired. The current drawn from the battery through these pull resistors will
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
186 be the sum of U705 Ioff and U401 Ii, each of which is listed as 0.1 uA typical
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
187 in Nexperia datasheets. The listed worst case specs are 10 uA for Ioff and 5 uA
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
188 for Ii, thus under presumably very rare conditions, we could have a maximum
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
189 current draw of 15 uA per each of the 3 pull-ups. 15 uA times 22 kOhm equals a
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
190 voltage drop of 330 mV, thus U401 inputs will remain at 2.8 V or above (meaning
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
191 no increased Vio supply current draw) with the battery as low as 3.1 V, which
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
192 is below the operational range for the mobile.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
193
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
194 Now consider what happens when USB power is plugged in, either a host computer
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
195 or a charger. FT2232D will power up in UART mode and start putting out logic
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
196 high on all of its outputs (the state when no one opens either of the two serial
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
197 ports in host computer software); U705 will also power up and start putting out
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
198 the same logic high on the 3 signal nets going to the mobile domain. At this
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
199 point U705 output pads are no longer in their Ioff state, instead they are in
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
200 the actively driving high state, and Nexperia datasheet says that the voltage
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
201 at these output pins should not exceed Vcc, which is 3.3 V in the present case.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
202 VBAT can be as high as 4.2 V, thus we are operating the 74LVC541A under somewhat
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
203 adverse conditions.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
204
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
205 The undesirable adverse condition is that current will flow through the LVC
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
206 buffer's output p-channel MOSFET (open for driving high) in the wrong direction.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
207 The maximum magnitude of this current is about 41 uA, computed as
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
208 (4.2-3.3 V) / 22 kOhm. This current magnitude is expected to be far too low to
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
209 damage the 74LVC541A IC (the limiting values Iok spec is 50 mA), thus the only
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
210 remaining concern would be feeding of a higher voltage into the USB domain's
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
211 regulated 3.3V rail. This concern is addressed in the following subsection.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
212
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
213 Aside from the issues of reverse current flow through the LVC buffer's output
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
214 p-channel MOSFET, the other concern with this 41 uA current (at maximum VBAT)
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
215 is that this current is drained from the battery. With a total of 3 such
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
216 pull-ups, we expect a total battery drain current of 123 uA at maximum battery
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
217 charge - but this current only turns on when USB power is applied, and the
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
218 current into U705 output pins goes up from 0.1 uA to 41 uA per pin. However,
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
219 when USB power is applied for extended periods of time, it is usually done for
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
220 the purpose of charging the battery, and the charging current of 500 mA far
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
221 exceeds the drain current of 123 uA. In order for the battery to not be
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
222 charging when USB power is present, the system would have to be in one of two
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
223 other states: either the user connected USB for computer interface purposes and
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
224 not for charging (the charging switch is off), or the charge cycle finished but
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
225 the user hasn't unplugged the charger yet. Both of these conditions are not
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
226 expected to persist for unreasonably long time spans, hence the Mother deems it
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
227 acceptable to impose this 123 uA battery drain during times of active computer
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
228 interfacing.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
229
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
230 In the case when the charging switch is on and the charging cycle has finished,
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
231 it is also important to consider that Iota ABB sleep is prevented for as long as
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
232 VCHG remains applied to the chipset, which holds whenever USB power is present
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
233 and the charging switch is on. In this state (charging cycle finished, but VCHG
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
234 not removed yet) Calypso can enter deep sleep (the main VCXO is stopped), but
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
235 Iota ABB sleep is prevented. According to TI's APN2_110.pdf document, the
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
236 difference in battery power draw between deep and "superdeep" sleep modes is
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
237 about 600 uA - thus leaving the charger plugged in after charge cycle completion
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
238 causes even more battery drain through this other mechanism than through our
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
239 VBAT pull-up resistors in the USB-serial interface.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
240
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
241 Finally, whenever any of the 3 USB domain outputs in question (TxD, DTR or TxD2)
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
242 drives low, the current drawn from VBAT on that net increases from 41 uA to
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
243 about 190 uA at maximum VBAT, computed as 4.2 V / 22 kOhm. However, this
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
244 condition only occurs when the operator does active host computer interfacing
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
245 with software (the main AT command UART needs to be opened in order for DTR to
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
246 go low, and each of the two TxD lines goes low only when the host computer
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
247 actively transmits bytes), thus this increased battery current draw corresponds
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
248 to explicit user activity, rather than something that happens on its own. In
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
249 contrast, typical user activity on an untethered phone involves the LCD and its
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
250 backlight turning on, consuming tens of mA instead of hundreds of uA.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
251
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
252 It also needs to be noted that all of these currents are drawn directly from the
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
253 battery without going through Iota LDO regulators, thus none of these uA numbers
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
254 come out of the 1 mA sleep mode Vio current budget.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
255
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
256 2.4.1. USB domain 3.3V load resistor
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
257
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
258 One concern raised in the analysis of VBAT pull-ups is that when current flows
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
259 from the battery into the USB domain's P_3V3 rail through U705 outputs in
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
260 reverse, the effect may be to raise that rail above 3.3 V. To prevent this
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
261 effect, the Mother's idea is to add a load resistor to the USB domain, a
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
262 3.3 kOhm load permanently placed between P_3V3 and GND, producing a permanent
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
263 1 mA draw from USB, going through our 3.3V regulator. For comparison, FT2232D
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
264 is said to draw about 30 mA of supply current, although the datasheet does not
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
265 specify how it breaks down between Vcc and Vccio supply currents, hence most of
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
266 this 30 mA is probably drawn directly from USB 5V, without going through our
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
267 3.3V regulator. The addition of 1 mA to the overall USB current draw can be
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
268 considered insignificant (especially for 500 mA charging, but even for 30 mA
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
269 host computer interfacing), but with a guaranteed load of at least 1 mA on
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
270 P_3V3, any wayward current coming from the battery (123 uA maximum) will always
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
271 be absorbed into this load without raising P_3V3 above its intended 3.3 V.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
272
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
273 2.5. Pull-down to GND on Host_RTS
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
274
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
275 The effect of Host_RTS being sensed as low instead of high when there is no USB
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
276 host connected is that any unsolicited output on the AT command channel will be
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
277 flushed in this no-host-connected state, instead of being buffered in the
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
278 mobile. Given that an end user mobile phone (as opposed to a dedicated cellular
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
279 modem) is expected to be untethered most of the time, having buffered output
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
280 accumulate while waiting for a host computer to be connected "some day" does not
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
281 sound like a good idea, hence having it flushed by unblocked flow control state
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
282 soundly appears to be the better option. And with only 3 out of the 4 FT2232D
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
283 to Calypso signals needing pull-ups to VBAT, only 3 need U705 buffer slots,
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
284 making a single 74LVC541A buffer IC sufficient for both directions in the USB
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
285 domain.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
286
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
287 The value of the pull-down resistor on the Host_RTS net (running from FT2232D
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
288 ADBUS2 output to U401 input) will be 47 kOhm. When USB power is applied but no
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
289 one opens the AT command UART channel, FT2232D will drive its RTS output high,
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
290 sourcing about 70 uA of current from its USB 3.3V supply into the pull-down
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
291 resistor - well within FT2232D output current sourcing budget.
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
292
84
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
293 2.6. UART rescue header
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
294
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
295 With the built-in FT2232D subsystem becoming a part of the critical path for
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
296 board bring-up and any kind of Calypso GSM functionality, we get a new concern,
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
297 now that we live in an era of severe part shortages and insanely long lead
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
298 times: what if we are unable to get some critical part for this USB subsystem,
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
299 or run out of parts in the course of troubleshooting iterations? Likewise,
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
300 what if some design mistake causes our USB subsystem to not work as intended,
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
301 thereby making the main Calypso GSM part of the board inaccessible?
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
302
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
303 The Mother's answer to this concern consists of a 10-pin header at reference
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
304 designator J301. Out of the total of 9 UART signals running between mobile and
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
305 USB domains, 8 of these signals (all except Host_RI) plus two GND pins will be
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
306 wired to this header, in the same FreeCalypso dual UART pinout as used on
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
307 FCDEV3B and Caramel2. If the USB subsystem is fully populated on a given Venus
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
308 board and if it works as designed, the only things that can be connected to J301
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
309 are oscilloscope probes - don't connect an external DUART28 or other adapter,
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
310 or you will cause a driver conflict between built-in USB outputs and that
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
311 external adapter. However, if the entire USB subsystem is omitted from board
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
312 population (presumably due to part shortage), or if U705 and R707 are removed
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
313 following a discovery of killer problems in this subsystem, then an external
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
314 DUART28 adapter can be connected to J301, and it will effectively take the place
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
315 of the built-in USB subsystem that has been taken out.
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
316
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
317 2.6.1. DUART28 modifications
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
318
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
319 If we end up having to use an external DUART28 adapter board instead of the
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
320 built-in USB subsystem, that DUART28 will need to be slightly modified, as in
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
321 surgical rework:
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
322
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
323 * Adapter input pull-up resistors R11, R12, R14 and R16 will need to be removed
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
324 - see section 2.3 above for the reasoning.
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
325
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
326 * A loading resistor will need to be added across C12 (perhaps soldered directly
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
327 on top of the cap), following section 2.4.1 above.
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
328
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
329 Also because DUART28 adapter outputs are at 2.8V rather than 3.3V (DUART28 was
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
330 designed to feed signals directly to Calypso inputs, without a subsequent LVC
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
331 buffer in the Calypso domain), the current flowing from the mobile domain
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
332 battery into DUART28 P_2V8 through the 74LVC541A buffer's output p-channel
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
333 MOSFET in reverse increases from about 41 uA to about 58 uA per pin, accounting
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
334 for 2.2 kOhm series resistors on DUART28 outputs in addition to our 22 kOhm
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
335 pull-ups to VBAT. We can either live with this slightly higher current, or we
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
336 can increase R401, R402 and R403 on those Venus boards that will go without
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
337 built-in USB.
beb6519a3be5 doc/USB-and-mobile-domains: document UART rescue header
Mychaela Falconia <falcon@freecalypso.org>
parents: 38
diff changeset
338
38
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
339 3. Boot control signals
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
340
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
341 The two boot control signals RPWON and nTESTRESET properly belong in the mobile
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
342 domain. They are pulled up to VBAT inside the mobile domain (RPWON is pulled up
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
343 to VBAT inside the Iota chip, nTESTRESET is pulled up to UPR with R208 per
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
344 Leonardo schematics), many other designs don't provide any way at all for these
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
345 signals to be pulled down, but on FC Venus we have a dual OD buffer (74LVC2G07)
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
346 in the USB domain that can pull either signal down on host command. This dual
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
347 OD buffer is little different from a pair of dry contact pushbutton switches
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
348 shorting to GND, thus the two boot control signals don't bring on any of the
32b848a081a3 venus/doc/USB-and-mobile-domains treatise written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
349 difficulties like those associated with the UART interface.